TweetFollow Us on Twitter

Tiger. Automator

Volume Number: 21 (2005)
Issue Number: 5
Column Tag: Programming

Getting Started

Tiger. Automator

by Dave Mark

In last month's column, we learned a bit about the bash shell, then played a bit with MySQL. I was originally planning on following that up in this month's column with an intro to combining MySQL and PHP. But in between then and now, I ended up moving my baseline machines over to Tiger and, well, I ended up spending just a boatload of time playing with Tiger. So much so, that I decided to postpone my PHP MySQL column for a month so I could write about my favorite new toy, Automator.

Getting Started with Automator

Automator is an application that ships with every copy of Mac OS X 10.4, a.k.a. Tiger. Contrary to popular belief, Automator is not a replacement for AppleScript. Automator is not a scripting environment. Rather, Automator is a powerful sequencer that allows you to sequence a series of commands, called actions, to create a custom workflow.

Still confused? No problem. Let's build a couple of workflows and you'll soon see the power of Automator.

Start by launching Automator. You'll find it just where you'd expect it, in your Applications folder. Figure 1 shows the Automator icon.


Figure 1. The Automator icon.

When you launch Automator, a new, untitled workflow window will appear (see Figure 2). The workflow window is divided into 5 main areas. The upper part of the window is called the toolbar. In the workflow window shown in Figure 2, the toolbar consists of the search field (on the left), and the dimmed Run and Stop buttons (on the right).

Below the search field is the library. The library is a list of applications that support Automator, as well as example and saved workflows. An application is said to support Automator by shipping with its own set of Automator actions. For example, in Figure 2's library, iTunes is selected, and the action list (just to the right of the library list) shows all the actions that shipped with iTunes. Each time you re-launch it, Automator steps through your list of installed applications and rebuilds its library and action lists.

    Want to build your own actions? Check out Ben Waldie's excellent Mac OS X Technology Guide to Automator. The first half covers the details of using Automator. The second half tells you everything you need to know to roll your own actions, in either AppleScript or Objective-C. $14.95 for the eBook, $29.95 for the print book. Here's the link:

    http://spiderworks.com/books/automator.php

    If you've got an existing app and are even thinking about adding Automator support now or in the future, the first thing you should do is make your app scriptable. Making your app scriptable allows/encourages others to write scripts and create actions that incorporate your application into their own workflows. Once people use your app in an essential workflow, they are much less likely to switch to a competing product. Brilliant!

In addition to the toolbar, library, and action areas, the workflow window also features a workflow area and a description area. As you'll see, the workflow is where all the work gets done. We'll build a sample workflow next. In Figure 2, the workflow area says Drag or add actions here to build your workflow. The description area contains a description of the currently selected action. In Figure 2, the description area describes the action Start iTunes Playing.


Figure 2. An untitled Automator workflow window.

Building a Workflow

Nothing will connect the synapses in your brain more than actually running Automator through its paces. Let's build a workflow. Our first workflow will prompt you to select a folder, compress the folder into a .zip archive, then create a new mail message and attach the archive to the message.

In your workflow window, click on Finder in the Library list. A list of all the currently available Finder actions will appear in the Action list. Click and drag the action named Ask for Finder Items from the Action list into the workflow area (see Figure 3).


Figure 3. Adding the Ask for Finder Items action to the workflow.

As you can see in Figure 3, the Ask for Finder Items action is represented by a subpane in the workflow area. Each action comes with its own user interface and an appropriate description in the description area (lower left area of the window). Each action is numbered. As you can see in the upper-left corner of this action, the action is number 1 in our workflow sequence.

Since we want our action to prompt for a folder, select Folders from the Type: popup menu. I selected Desktop from the Start at: popup so the Finder would start prompting me at the desktop. I changed my prompt to say Choose a Folder: and I left the Allow Multiple Selection checkbox unchecked.

To test this workflow, click on the Run button on the right side of the toolbar (top of window). A panel will appear, prompting you to choose a folder (see Figure 4). Maneuver your way to a folder you like, then click the Choose button. Note that you are only allowed to select a folder, not a file, and that multiple selections are not allowed. Just as you specified. When you click the Choose button, the workflow stops.


Figure 4. This panel appears when you first run your workflow.

Not very exciting, but it does what it was supposed to. It prompted me for a folder. Since Ask for Finder Items is our only action, once we clicked Choose or Cancel, the workflow exits. Sure would be nice to be able to get a bit of feedback, make sure things are running properly. One way to do this is to open the log window. Select Show Log from the View menu. Figure 5 shows my log window after I ran my workflow. Note that the log window is extensible (drag the little dot at the bottom of the window) and that it is wiped at the beginning of each run session.


Figure 5. Automator's log window.

The log window is useful in tracking your progress, but it doesn't really show the result. In this example, it would be nice to get some feedback that Automator got the right folder. Automator provides an action, called View Results, that gives a bit of detail on the values returned by the previous action.

Click on the Automator entry in the library list, then drag the View Results action to the bottom of your workflow. Click the Run button. When prompted, select a folder and click the Choose button. Notice that the View Results action displays (see Figure 6) an AppleScript-looking result that reflects the folder you chose. You can select this text and copy it to the clipboard, if you ever find the need.


Figure 6. Adding the View Results action.

Take a closer look at the area, about 2/3 of the way across the action (from left to right), where the two actions actually connect. Figure 7 focuses in on this area. This area shows the type of data being passed along by the top action and expected by the bottom action. Notice that they match. Both actions are dealing with the same data type. As long as the types match, the data will get passed as expected and everything will end up just peachy-keen. If you pick an action that expects a different data type than you are passing, Automator will flag this by displaying the types in red and barking furiously (well, OK, not that last part). There will be times when you don't care about type mismatches (for example, if you are just ignoring the input) but that glaring red warning sign is really nice to have.


Figure 7. The interface between two actions.

Let's finish off our workflow. In the library list, click on Finder. In the action list, drag the action Create Archive into the middle of your workflow, below Ask for Finder Items but above View Results. Note that Automator automatically renumbers your actions so Create Archive becomes number two.

Figure 8 shows my version of the Create Archive action. Notice that this action features an Options disclosure triangle, which I've opened. Not all actions have Options. Worth looking for it, though. The Show Action When Run checkbox lets you customize the action's user interface, having the action prompt you for some or all of the settings instead of using the settings you specify.


Figure 8. The Create Archive action.

If you run the action again, you'll be prompted to choose a folder and that folder's contents will be saved as a .zip archive.

Let's add one last action. In the library, select Mail. In the Mail action list, select New Mail Message. Drag it below Create Archive and above View Results. Figure 9 shows my version of this action. Notice the options available to you. Run the workflow. You'll be prompted for a folder, the folder contents will be archived, a new email message will be created with the specified settings and the archive will be attached to the message. Cool beans! Now you're getting a real sense of the power of Automator. I totally love this app. Nicely done, Apple.


Figure 9. The New Mail Message action.

Take a Bow, BBEdit

One thing you'll notice as you look through the library list, is that nestled in among all the Apple applications that feature their own actions is our old buddy BBEdit. By the time you read this, there are sure to be other apps that ship with their own actions, but BBEdit was the first third party application to ship with Automator in mind. Figure 10 shows a list of the BBEdit actions.

Note that you'll need to have BBEdit 8.2 or later installed in order for the BBEdit actions to show up in Automator. Don't have BBEdit? Download the demo from http://bbedit.com. It doesn't suck!


Figure 10. The BBEdit actions.

One Final Example

I know this column is running a bit long, but I just can't help myself. Gotta do one more example. I think this one is very cool.

Start by launching iCal. In the Calendar menu, select Subscribe..., then enter this URL:

webcal://ical.mac.com/ical/DVDs.ics

Now click the Subscribe button. Your calendar should be populated with a new, weekly item called DVD Releases. Wouldn't it be cool if you could access that info in BBEdit? Maybe use BBEdit's actions to format the list in some cool way, then send the list as an email to your DVD-swapping buddies? Well, I'm not going to do all that work for you, but I will get you started.

In Automator, close any open workflows, then create a new, untitled workflow by selecting New from the File menu.

In the library list, click on iCal. Drag the action Find iCal Items to the workflow area. From the Find: popup menu, select Events. Notice that the action name changed to Find Events in iCal. Now make the Whose: sequence of popups read Calendar, then Is, then DVD Releases.

Now drag another iCal item, Event Summary, into the workflow, below the first action. In the For: popup menu, select This Week.

Finally, click on BBEdit in the library list, then drag the action New BBEdit Document to the end of your workflow. Figure 11 shows my final workflow.


Figure 11. The BBEdit workflow.

Go ahead and run the workflow. Note that the Event Summary action can take a while to cook through all the new DVDs. Figure 12 shows the BBEdit window that appeared when I ran my workflow. Note that I have my BBEdit prefs set to soft-wrap at 80 columns.


Figure 12. The new releases in a BBEdit window.

Until Next Month...

There is just so much you can do with Automator. Your assignment, should you choose to accept it, is to clean up the DVD listings. You'll want to take a look at the BBEdit actions Concatenate, Search and Replace (use grep), Delete Lines Containing, and Sort Lines. Of course, there are any number of ways to skin this cat.

Want to learn more about Automator? I already mentioned Ben Waldie's book (http://spiderworks.com/books/automator.php). Here's a pair of web sites dedicated to Automator:

http://automator.us

http://www.automatorworld.com

These sites are both well worth the visit. Lots of great examples, downloads, and other great resources. Enjoy, and see you next month!


Dave Mark is a long-time Mac developer and author and has written a number of books on Macintosh development. Dave has been writing for MacTech since its birth! Be sure to check out the new Learn C on the Macintosh, Mac OS X Edition at http://www.spiderworks.com.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Airfoil 5.9.1 - Send audio from any app...
Airfoil allows you to send any audio to AirPort Express units, Apple TVs, and even other Macs and PCs, all in sync! It's your audio - everywhere. With Airfoil you can take audio from any... Read more
TunnelBear 3.9.8 - Subscription-based pr...
TunnelBear is a subscription-based virtual private network (VPN) service and companion app, enabling you to browse the internet privately and securely. Features Browse privately - Secure your data... Read more
Things 3.12.4 - Elegant personal task ma...
Things is a task management solution that helps to organize your tasks in an elegant and intuitive way. Things combines powerful features with simplicity through the use of tags and its intelligent... Read more
Vitamin-R 3.17 - Personal productivity t...
Vitamin-R creates the optimal conditions for your brain to work at its best by structuring your work into short bursts of distraction-free, highly focused activity alternating with opportunities for... Read more
iMazing 2.11.6 - Complete iOS device man...
iMazing (was DiskAid) is the ultimate iOS device manager with capabilities far beyond what iTunes offers. With iMazing and your iOS device (iPhone, iPad, or iPod), you can: Copy music to and from... Read more
BBEdit 13.1 - Powerful text and HTML edi...
BBEdit is the leading professional HTML and text editor for the Mac. Specifically crafted in response to the needs of Web authors and software developers, this award-winning product provides a... Read more
Apple Security Update 2020-003 - For mac...
Apple Security Update is recommended for all users and improves the security of OS X. For detailed information about the security content of this update, please visit lists security updates for... Read more
BetterTouchTool 3.379 - Customize multi-...
BetterTouchTool adds many new, fully customizable gestures to the Magic Mouse, Multi-Touch MacBook trackpad, and Magic Trackpad. These gestures are customizable: Magic Mouse: Pinch in / out (zoom)... Read more
Bartender 3.1.23 - Organize your menu-ba...
Bartender lets you organize your menu-bar apps by hiding them, rearranging them, or moving them to Bartender's Bar. You can display the full menu bar, set options to have menu-bar items show in the... Read more
TechTool Pro 12.0.3 - Hard drive and sys...
TechTool Pro has long been one of the foremost utilities for keeping your Mac running smoothly and efficiently. With the release of version 12, it has become more proficient than ever. Main... Read more

Latest Forum Discussions

See All

The 5 Best Mobile Real Time Strategy Gam...
Real-time strategy games feel like they’d be a perfect fit for mobile, but they’re trickier to pull off that you might think. The traditional mold of base-building and micro management can work on touch screens, but needs to be carefully honed so... | Read more »
Using your phone in a protest
I can't write about games today. There is a struggle happening in the streets right now and it needs everyone's attention. Here's some good info on how you can use your iOS device safely amidst a protest. | Read more »
Dungonian is a card-based dungeon crawle...
Dungonian is a card-based dungeon crawler from developer SandFish Games that only recently launched as a free-to-play title. It offers an extensive roster of playable heroes to collect and enemies to take down, and it's available right now for iOS... | Read more »
Steam Link Spotlight - Signs of the Sojo...
Steam Link Spotlight is a feature where we look at PC games that play exceptionally well using the Steam Link app. Our last entry was XCOM: Chimera Squad. Read about how it plays using Steam Link's new mouse and keyboard support over here. | Read more »
Steampunk Tower 2, DreamGate's sequ...
Steampunk Tower 2 is a DreamGate's follow up to their previous tower defence game. It's available now for both iOS and Android as a free-to-play title and will see players defending their lone base by kitting it out with a variety of turrets. [... | Read more »
Clash Royale: The Road to Legendary Aren...
Supercell recently celebrated its 10th anniversary and their best title, Clash Royale, is as good as it's ever been. Even for lapsed players, returning to the game is as easy as can be. If you want to join us in picking the game back up, we've put... | Read more »
Pokemon Go Fest 2020 will be a virtual e...
Niantic has announced that Pokemon Go Fest will still take place this year although understandably it won't be a physical event. Instead, it will become a virtual celebration and is set to be held on 25th and 26th July. [Read more] | Read more »
Marvel Future Fight's major May upd...
Marvel Future Fight's latest update has now landed, and it sounds like a big one. The focus this time around is on Marvel's Guardians of the Galaxy, and it introduces all-new characters, quests, and uniforms for players to collect. [Read more] | Read more »
SINoALICE, Yoko Taro and Pokelabo's...
Yoko Taro and developer Pokelabo's SINoALICE has now opened for pre-registration over on the App Store. It's already amassed 1.5 million Android pre-registrations, and it's currently slated to launch on July 1st. [Read more] | Read more »
Masketeers: Idle Has Fallen's lates...
Masketeers: Idle Has Fallen is the latest endeavour from Appxplore, the folks behind Crab War, Thor: War of Tapnarok and Light A Way. It's an idle RPG that's currently available for Android in Early Access and will head to iOS at a later date. [... | Read more »

Price Scanner via MacPrices.net

Apple’s new 2020 13″ MacBook Pros on sale for...
Apple reseller Abt Electronics has new 2020 13″ MacBook Pros on sale today for up to $140 off MSRP, starting at $1208. Shipping is free, and most configurations are in stock today. Note that Abt’s... Read more
Apple CEO Reacts To Nationwide Protests Over...
NEWS: 06.03.20 – With the recent death of a black man in the custody of a white police officer igniting outrage among Americans from all walks of life, which resulted in protests and civil unrest... Read more
At up to $420 off MSRP, these Certified Refur...
Apple has Certified Refurbished 2019 16″ MacBook Pros available for up to $420 off the cost of new models, starting at $2039. Each model features a new outer case, shipping is free, and an Apple 1-... Read more
Apple restocks refurbished 3rd generation 12....
Apple restocked select 3rd generation 12.9″ WiFi iPad Pros starting at only $699 and up to $330 off original MSRP. Each iPad comes with a standard Apple one-year warranty, outer cases are new, and... Read more
These wireless carriers are offering Apple’s...
Looking for a deal on Apple’s new iPhone SE? Apple itself offers the unlocked 64GB iPhone SE for $399 or $16.62/month. If you’re willing to try a new carrier, two of Apple’s wireless carriers are... Read more
Save $80 on the 64GB 10.5″ iPad Air with this...
Apple has 10.5″ 64GB WiFi iPad Airs models available for $80 off MSRP, Certified Refurbished. Each iPad comes with Apple’s standard one-year warranty and includes a new outer case. Shipping is free... Read more
Apple offers wide range of refurbished custom...
Save up to $7740 on a custom-configured Mac Pro with these Certified Refurbished models available at Apple. Each Mac Pro features a new outer case, free shipping, and includes Apple’s standard 1-year... Read more
Sale! $200 off on select 2020 13″ MacBook Pro...
Amazon has select 2020 13″ MacBook Pro configurations on sale today for $200 off Apple’s MSRP. Shipping is free. Be sure to purchase the MacBook Pro from Amazon, rather than a third-party seller, and... Read more
June 1 only: $100 off Apple’s iPhones at Boos...
Boost Mobile is offering Apple iPhone 11, 11 Pro, and iPhone 11 Pro Max models for $100 off MSRP with service. Their discount reduces the cost of an iPhone 11/64GB to $599, iPhone 11 Pro to $899 for... Read more
Sams Club Sales Event: $100 off every Apple W...
Sams Club is discounting all Apple Watch Series 5 models by $100 off Apple’s MSRP through June 3, 2020. Choose free shipping or free local store pickup (if available). Sale prices for online orders... Read more

Jobs Board

Security Officer ($23.00/Hourly) - *Apple*...
**Security Officer \($23\.00/Hourly\) \- Apple Store** **Description** About NMS Built on a culture of safety and integrity, NMSdelivers award\-winning, integrated Read more
*Apple* Service Desk Analyst - Zones LLC (Un...
Apple Service Desk Analyst Professional Services Albany, New York Apply Description Position OverviewAs a Service Desk Analyst, you will provide customer-friendly Read more
*Apple* Mac Desktop Support - Global Dimensi...
…Operate and support an Active Directory (AD) server-client environment for all Apple devices operating on the BUMED network + Leverage necessary industry enterprise Read more
*Apple* Mac Desktop Support - Global Dimensi...
…Operate and support an Active Directory (AD) server-client environment for all Apple devices operating on the BUMED network + Leverage necessary industry enterprise Read more
Surgical Technologist III, *Apple* Hill Sur...
Surgical Technologist III, Apple Hill Surgical Center - Full Time Tracking Code D5.29.2020 Job Description Surgical Technologist III Apple Hill Surgical Center Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.