TweetFollow Us on Twitter

Debugging Retain Count Bugs

Volume Number: 21 (2005)
Issue Number: 4
Column Tag: Programming

Tips From Big Nerd Ranch

by Aaron Hillegass, Chris Campbell, and Marquis Logan

Debugging Retain Count Bugs

At the Big Nerd Ranch, we teach the world's greatest Cocoa programming course (and the greatest Python, PHP, Perl, and PostgreSQL classes). One of the things that makes the course great is the alumni mailing list. We thought it would be a great service to the larger developer community if we shared some of the tips that have appeared on the list. So each month, we are going to cull through the discussion and publish a few pieces of useful wisdom. This month, we are talking about how to debug errors in the use of retain and release.

Hunting down bugs in your use of retain and release can be very difficult. Before delving into all the ways to find them, let's quickly review the lifetime of an object on the heap. The object is allocated (through the +allocWithZone: method which calls the malloc_zone_calloc() function), it is used, and then it is deallocated (through the -dealloc method which calls the malloc_zone_free() function).

Complicating matters is the retain count. A newly allocated object has a retain count of 1. When an object is retained, the retain count is incremented. When it is released, the retain count is decremented. When the retain count goes to zero, the object is deallocated.

This is complicated even further by the autorelease pool. When an object is sent the message autorelease, it adds itself to the current autorelease pool. When the autorelease pool is deallocated, it send the message release to every object in the pool. In a Cocoa application, the autorelease pool is deallocated after each event is handled.

Use release when possible

Here are two similar erroneous methods:

- (void)bad
{
    NSArray *array = [[NSArray alloc] init];
    [array release];
    [array release];
}

- (void)worse
{
    NSArray *array = [[NSArray alloc] init];
    [array release];
    [array autorelease];
}

The first method is run inside a debugger, it will stop on the erroneous line with a BAD_ACCESS error. The second method will cause a BAD_ACCESS only when the autorelease pool is deallocated. In a large program, it may be difficult to back track to where you autoreleased that object. Using release, besides being more efficient, will make your code easier to debug.

Note that this does not mean that you should break conventions: when creating an object to be vended out, it should be autoreleased:

- (NSNumber *)currentPrice
{
    NSNumber *p = [[NSNumber alloc] initWithInt:(whatTheMarketWillBear - 1)];
    [p autorelease];
    return p;
}

Set Pointers to nil after Objects are Released

To make it impossible to send messages to released objects, set the pointer to nil after the object is released:

- (void)fireThem
{
   [employees release];
   employees = nil;
}

Using Zombies

This code (which uses an object after it has been deallocated) often runs without crashing or throwing exceptions:

- (IBAction)stupidAction:(id)sender
{
    NSMutableString *string = [[nameField stringValue] mutableCopy];
    [string release];
    NSMutableString *anotherString = [NSMutableString stringWithFormat:@"I'm new!"];
    NSLog(@"string = %@", string);
}

The new string object is sometimes created in the same place in memory that the old one had occupied. So, when you run this you sometimes see:

string = I'm new!

On the other hand, sometimes the new string isn't created in the same location and the application crashes with a BAD_ACCESS. As you can imagine, hunting down a bug may or may not rear its ugly head can be maddening.

To debug this code, instead of freeing the memory for reuse, turn the objects into zombies. When you try to use a zombie, Cocoa will throw an exception. Thus, you can consistently reproduce this bug. The trick, then, is to tell Foundation and CoreFoundation, that you want to zombify your objects instead of freeing them.

First, you need to use the debug version of the CoreFoundation framework. To do this, select your executable in Xcode, and in the inspector under the General tab, choose "Use the debug suffix when loading frameworks."

Then, under the Arguments tab, set the environment variable NSZombieEnabled to YES and CFZombieLevel to 5:

Now when you send a message to a released object you will get a nice exception like this:

*** Selector 'respondsToSelector:' sent to dealloced instance 0x328840 of class NSMutableString.

(Remember to disable zombies once the bug is found -- you want the objects to be freed, not zombified in a deployed app.)

Putting a breakpoint on exceptions

Now that you have an exception that is thrown consistently, you will need to create a breakpoint in the debugger where the exception gets raised. Before dealing with the debugger, let's review how exceptions get thrown.

The Cocoa libraries check certain conditions, and if the conditions are not met, they raise exceptions. For example, if you ask for the second item in an array that has only one item, an exception will be thrown. Throwing an exception looks like this:

if (x == 13) {
    NSException *badness = [NSException exceptionWithName:@"BadLuckException"
                                                    reason:@"13 is unlucky"
                                                    userInfo:nil];
    [badness raise];
}

Thus, to stop the debugger as soon as an exception is raised, you can add the breakpoint for -[NSException raise] using the breakpoint panel.

Gradually, Cocoa programmers are moving to the new @throw/@catch/@finally form of exceptions stolen from C++ and Java. In this form, you will throw exceptions like this:

    NSException *badness = [NSException exceptionWithName:@"BadLuckException"
                                                   reason:@"13 is unlucky"
                                                   userInfo:nil];
    
    @throw badness;

(To use new-style exceptions, you must pass the -fobjc-exceptions flag to the compiler.)

To detect when an exception is being thrown from within the debugger, you will want to create a breakpoint on objc_exception_throw().

You will want these breakpoints every time you run the debugger. To automatically add these breakpoints anytime you use gdb, create a .gdbinit file in your home directory and include these lines:

fb -[NSException raise]
fb objc_exception_throw()

Those are the four tips for this week:

  • release instead of autorelease when possible
  • After releasing an object, set pointers to it to nil
  • Use zombies to hunt down retain/release problems
  • Add breakpoints to stop on exceptions

We hope they are useful to you, and we will be back next month with a few more.


Aaron Hillegass, Chris Campbell, and Marquis Logan

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Business Analyst | *Apple* Pay - Banco Popu...
Business Analyst | Apple PayApply now " Apply now + Apply Now + Start applying with LinkedIn Start + Please wait Date:Mar 19, 2024 Location: San Juan-Cupey, PR Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.