TweetFollow Us on Twitter

First Steps Volume Number: 17 (2001)
Issue Number: 4
Column Tag: PowerPlant Workshop

First Steps

By Aaron Montgomery

How one goes about writing a PowerPlant application

My Intended Audience

This series of articles is intended to be an introduction into the use of the PowerPlant application framework. It is intended to be a gentler introduction than The PowerPlant Book supplied on the CodeWarrior CD and more elementary than previous MacTech articles (in particular, those by John C. Daub). We will start by building a very basic application in this article and we will add features to it in later articles (upcoming articles are planned on the topics of: debugging, windows, files, dialogs, preferences, and panes).

PowerPlant is big and it would be hard (if not impossible) to try to provide a simple linear introduction to the topic. As a result, these articles are likely to introduce some aspect of the framework without fully explaining how it works. In some cases, the series will make a concerted effort to return to the topic but in other cases the reader will be expected to do a little reading on their own. One consequence of this is that it will probably be worthwhile to re-read earlier articles after finishing with the later articles. Another consequence is that often I will introduce a term without explanation and you may need to read more of the article before it makes sense.

While writing this article, I've assumed that the readers are familiar with the C++ programming language and basic Macintosh API programming topics. In addition to these programming skills, readers are also assumed to be familiar with the CodeWarrior IDE (including the use of the class browser and debugger).

Myself

Before you start reading this article, it is best to know where I learned what I know. I program as a hobby (not as a profession) and have been using PowerPlant in my projects for the past three years. Although I consider myself fairly adept with the framework, I don't claim to know all the details. I encourage those who know the framework better to contact me if I make any errors or miss any topics. Probably the best forum for this is the PowerPlant newsgroup and I will also post errata at my web site (see by-line).

Why Learn PowerPlant

PowerPlant is an application framework. You can find a detailed discussion of what this means in The PowerPlant Book, but basically, this means that it provides much of the routine code needed for a Macintosh application (in particular, the interface) and allows you to focus on the details of your specific program. At the time that I am writing this, a natural question arises: why bother with PowerPlant when you could use Cocoa? Personally, I decided to continue to use PowerPlant for two reasons. The first of which is my own personal familiarity with C++. Since I only program as a hobby, I don't have the time (or the need) to build that level of familiarity with Objective C and would like to continue to use a language I know. A second reason is that many of the programs I write for educational purposes will be used in environments where OS X is not going to be available for a number of years. PowerPlant allows me to use a single code-base to support a wide variety of platforms (from 68K to G4).

The Tools

This article will assume that you are using CodeWarrior 6 with the net-update to IDE 4.1.0.3 and no other modifications. In particular, it assumes the use of Universal Headers 3.3.2 and no modified PowerPlant files. I believe much of the code I write should also run on CodeWarrior 5 or with newer Universal Headers without much trouble (other than that caused by the Metrowerks' PowerPlant source). If you are trying to use these articles as a guide and run into trouble with a particular configuration, let me know and I will try to suggest a solution.

Stationary Options

The first thing to do with any project is to create a new project file from the Metrowerks supplied stationary. There are four options: Basic, Appearance, Document or Advanced. The Basic option is the simplest and all other options are built on top of it. The Document and Appearance options have identical library source file and include everything in the Basic option as well as the Appearance Classes, the Graphic Utilities, the Grayscale Classes and the Page Controller. The difference between the two versions is that the sample code for the Document option is set up for a basic application supporting the use of documents. The Advanced option contains everything in the Document and Appearance options as well as the Context Menu, the Debugging Classes, the Table Classes and the Threads Classes. This is the option I choose most frequently (the Debugging Classes are so good, they will be the topic of the second article in this series).

For this project, I started with the Advanced option, moved some unused classes out of the regular targets to a side-target (Other Stuff). We'll add them back to the build targets when I start using them in later projects. I have also made some stylistic changes (e.g., requiring explicit use of the PowerPlant namespace and adding a separate file to contain main()). Finally, I removed some code so that I will be able to focus on the basics. Much of the removed code will reappear in later articles.

Naming Conventions

Before examining any source code, the PowerPlant naming conventions deserve mention. All PowerPlant types defined by typedef macros end with a T. All PowerPlant classes begin with L (for library), U (for utility) or St (for stack-based). Class methods begin with uppercase letters and use capitalization as a word-break. Class data (static data) begins with the letter s and object data begins with the letter m. Calls to the Macintosh API are indicated by a global scope operator (::). Local variables are indicated by the prefix the. You can find more conventions in The PowerPlant Book.

User classes (those that you write) will typically start with a C (for class), I also use Ut (for utility) and Au (for automatic, i.e., stack-based) classes. Class data for my classes begins with our and object data begins with my. This helps me distinguish between data I am responsible for and data coming from the framework.

Browsing the Initialization Code

The first code we will discuss is the function main() in main.cp. One effective way to learn about PowerPlant is to use the class browser to examine a function's definition and commentary. In order to follow along, you will need to make the project with the class browser activated (see the Build Extras preference panel for the target). I will be using the PPC Debug target although you may want to use a different target depending on your setup. (I have removed all comments for listing in the magazine.)

main() in main.cp

int main()
{
   InitializeHeap(5);
   UQDGlobals::InitializeToolbox();
   ::FlushEvents(everyEvent, nil);
   UEnvironment::InitEnvironment();

   CDocumentApp   theApp;
   theApp.Run();
   
   return 0;
}

We'll quickly run through the initialization code in main() using the browser. Selecting the InitializeHeap() (e.g., by double-clicking the word) and then using Find Definition in the Search (or by using command-'), we can get the source for the function. PowerPlant commentary is good and the comments before the definition of InitializeHeap() describe its purpose: it expands the heap and calls the appropriate version of MoreMasters(). The next method is InitializeToolbox() and looking at its definition (and code commentary) you can see that it contains the standard Macintosh Toolbox initialization code. Following the toolbox initialization is a ::FlushEvents() call. This isn't called in the InitializeToolbox() method, but commentary in the PowerPlant stationary indicates that failure to call it may lead to problems and so we place it here. The last call in this sequence is InitEnvironment(). Looking at its definition (and code commentary) indicates that it will check for things like the existence of the Appearance Manager. Even if you do not use the UEnvironment class yourself, PowerPlant uses it and so you need to insure that it is initialized.

We have now reached the class CDocumentApp. This class represents the Macintosh application and the object theApp represents this instantiation of the Macintosh application. Again, we can use the browser to examine the constructor.

CDocumentApp() in CDocumentApp.cp

CDocumentApp::CDocumentApp()
{
   if (UEnvironment::HasFeature(env_HasAppearance))
   {
      ::RegisterAppearanceClient();
   }

   CTextDocument::RegisterClasses();
}

The HasFeature() determines if the Appearance Manager is installed. If it is installed, the application registers itself with the operating system. The second statement is a call to the static method RegisterClasses() of CTextDocument. This is necessary to build the window structure from the resource file and will be discussed in the third article.

Stepping Through Run()

The browser is good if the code is very linear, once the code becomes complicated, stepping through the source with the debugger can be a great aid in understanding. In order to do this, add a breakpoint on the line CDocApplication.Run() call in main.cp and run the application (with the debugger enabled). When the debugger halts at this breakpoint, step into the Run() method. I will describe, but won't list, the code from the PowerPlant source. The first thing that occurs is a sequence of initializations for the application: creating a menu bar, setting up the AppleEvent handlers and then calling Initialize(). This virtual method should handle initialization routines that need to happen after the menu bar and AppleEvent handlers have been initialized (and hence cannot occur in the constructor). Later we will use this method to create a dynamic menu, for now we fall back on the inherited method. PowerPlant then calls ForceTargetSwitch() (described below), initializes the cursor, updates the menu and starts handling events.

Event Processing

We have now reached the main event loop. There are two types of events to which the application needs to respond: AppleEvents and menu-commands. The PowerPlant framework handles the dispatching of some basic AppleEvents to virtual methods in the LApplication class. The only ones we need to implement here are the methods associated with Open Application and Reopen Application events. PowerPlant dispatches these to the StartUp() and ReopenApp() methods respectively.

StartUp() and ReopenApp() in CDocumentApp.cp
void
CDocumentApp::StartUp()
{
   ObeyCommand(cmd_New, nil);
}

void
CDocumentApp::DoReopenApp()
{   
   if ((UDesktop::FetchTopRegular() == nil)
         && (UDesktop::FetchTopModal() == nil))
   {
      ObeyCommand(cmd_New, nil);
   }
}

The basic idea of both methods is the same: pass the responsibility to ObeyCommand(). There only difference is that in ReopenApp(), the ObeyCommand() is only called if no other windows are open. In the actual source file, there is a long commentary about why this is the appropriate behavior.

The method ObeyCommand() is a virtual method of the LCommander class (from which LApplication inherits). Each LCommander has a supercommander (well, not quite, the top commander will not have a supercommander). The collection of commanders generated by following supercommanders up to the top commander is called the command chain. At any given time, exactly one LCommander object has control of the application, this object is said to be on duty. The call to ForceTargetSwitch() that we saw above placed the application object on duty. When ObeyCommand() is called, the object on duty should either obey the command or pass it to its base class. A basic example of this in this application is the cmd_New when no windows are open. To see how this is handled, place a breakpoint at the top of the ObeyCommand() method in LDocApplication (you can find this by typing command-' when no text is selected and typing ObeyCommand). Once the breakpoint is set, switch to the application (or start it from the debugger) and select Open from the File menu. You should step into the SendAECreateDocument() and MakeNewDocument() methods, the second is supplied by the CDocumentApp class.

MakeNewDocument() in CDocumentApp.cp
LModelObject*
CDocumentApp::MakeNewDocument()
{
   return new CTextDocument(this);
}

That was simple, we just pass all the work off to the CTextDocument class. We will leave CDocumentApp for a moment and explore the CTextDocument class.

CTextDocument() from CTextDocument.cp

CTextDocument::CTextDocument(
   LCommander*      inSuper)
   : LSingleDoc(inSuper)
{
   mWindow = LWindow::CreateWindow(PPob_TextWindow, this );
   
   myTextView =
      static_cast<LTextEditView*>(
         mWindow->FindPaneByID(kTextView));
   mWindow->SetLatentSub(myTextView);

   NameNewDoc();
   
   mWindow->Show();
}

Much of the code in the constructor handles the user interface and will be discussed in greater detail in the third article. We focus on those calls that concern the command chain. The CreateWindow() method creates a LWindow from data in the resource fork of the application. LWindow is derived from LCommander and the second argument in the CreateWindow() method sets the window object's supercommander. The window resource contains a LTextEditView and LTextEditView also inherits from LCommander and its supercommander will be set to the LWindow being created. The next two lines find the LTextEditView and then establish it as being the on duty when the window opens. The remaining two calls are mundane: NameNewDoc() uses a very naive method to generate unique window names (which will be improved in the third article) and Show() makes the window visible.

Now that we have a non-trivial command chain, we can demonstrate what happens when an object cannot obey a command. In this case, the command works it way up to the ObeyCommand() implementation in LCommander and you should place a breakpoint in that method. Now make sure a window is open in the application and select the Close item from the File menu. The first time you stop in LCommander's ObeyCommand(), a LTextEditView has received the command and is passing it upward to its supercommander. Running the debugger will cause the window to close and the application to continue. This means that the LWindow object was able to handle the command.

A good question arises here: If the LWindow handled the close event, what happened to the CTextDocument? To determine this, place a break point in the CTextDocument destructor and close another window. Before looking at the destructor code, examine the stack. By selecting on various locations of the stack you can see that the LDocument object's Close() method is called which causes the CTextDocument object to be destructed.

~CTextDocument() in CTextDocument.cp

CTextDocument::~CTextDocument()
{
   try
   {
      TakeOffDuty();
   }   
   catch (...)
   {
   }
}

The destructor is very simple and only calls TakeOffDuty() which is inherited from LCommander. This call takes the CTextDocument off duty (a good thing since its memory is about to be reclaimed).

To see a more complicated demonstration of the command chain, make sure a breakpoint is still set in LCommander's implementation of ObeyCommand(). Now make sure a window is open and chose Quit from the File menu. This command will need to work up many levels in the command chain. The LTextEditView object passes it to the LWindow object which passes it to the LDocument object which passes it on to the LApplication object which causes the application to quit.

Menu Manipulation

The other virtual method that you will need to override when you add (or remove) commands is FindCommandStatus(). We will discuss this more fully in a later article when we handle menu management, but for now we only need to worry about the first two parameters. The first, inCommand, is of type CommandT and is the command whose status is being determined. The second, outEnabled, is of type Boolean& and will be set to true if the LCommander object can handle the command. Each time the menus are displayed, the method FindCommandStatus() is called in a manner analogous to ObeyCommand(). If any LCommander in the command chain can handle the command, the method returns true and the menu item is enabled. If no LCommander in the command chain can handle the command, the method will return false and the menu item will be disabled. Because they are called in identical ways, ObeyCommand() and FindCommandStatus() need to be consistent in each class.

FindCommandStatus() in CDocumentApp.cp

void
CDocumentApp::FindCommandStatus(
   CommandT   inCommand,
   Boolean&   outEnabled,
   Boolean&   outUsesMark,
   UInt16&   outMark,
   Str255      outName)
{
   switch (inCommand)
{
      case cmd_Open:
{
outEnabled = false;
}
break;
      
      default:
{
         LDocApplication::FindCommandStatus(
inCommand, outEnabled, outUsesMark,
outMark, outName);
      }
break;
   }
}

The PowerPlant class LDocApplication assumes the application will have the ability to open documents. Since we aren't going to implement this until we discuss files (in the fourth article), we need to disable the command in the File menu. We simply set outEnabled to indicate that the command is never handled and the item will remain disabled. Similarly, the CTextDocument overrides its FindCommandStatus() method to disable the cmd_Save, cmd_SaveAs and cmd_Print commands. You can trace this method in exactly the same way as we did for ObeyCommand(), but that will be left as an exercise for the reader.

Concluding Remarks

If you've followed along so far, you should be able to start examining some of the command chains in the sample projects that are provided on the CodeWarrior CD. You might also want to start reading through the references I present at the end of this article. The next article will discuss PowerPlant's debugging classes. Following that we will expand on PowerPlant's document classes (windows in the third article and files in the fourth article).

PowerPlant References

The PowerPlant Book on the CodeWarrior CD is an introduction to PowerPlant provided by Metrowerks. Unlike this series of articles, The PowerPlant Book focuses on the interface building aspects of PowerPlant first. If you need to obtain a high level of proficiency with PowerPlant, this is the book to work from cover to cover. The PowerPlant Advanced Topics book on the CodeWarrior CD continues where The PowerPlant Book leaves off. It covers more complicated classes such as the Drag & Drop Classes, Thread Classes and Networking Classes to name a few. The topics are presented so that you will be able to read each chapter as you need it (and not necessarily in a sequential order). Together these books constitute the primary texts for learning PowerPlant.

The PowerPlant Reference on the CodeWarrior CD provides documentation for most of the PowerPlant classes. I found this useful for a short period of time while learning PowerPlant, but after a few months I began to rely more on the class browser, the actual source, and the commentary in the source instead of the reference book.

If you have access to old MacTech articles, the "From the Factory Floor" articles in the October, November and December 1998 issues discuss PowerPlant. The first two of these start with a "How would you learn PowerPlant" question. John C. Daub also wrote a series of MacTech articles from December 1998 through June 1999 which cover individual components of PowerPlant (but do not cover the basic classes). The MacTech issues from 1999 are available online, but the 1998 articles were not up when I checked. You will want to search the article archives at <www.mactech.com/>.

Finally you might be able to find a PowerPlant class at Metrowerk's CodeWarrior U site <http://www.codewarrior.com/>. These courses tend to follow The PowerPlant Book.


Aaron teaches in the Mathematics Department at Central Washington University in Ellensburg, WA. Outside of his job, he spends time riding his mountain bike, watching movies and entertaining his wife and two sons. You can email him at montgoaa@cwu.edu, try to catch his attention in the newsgroup comp.sys.mac.oop.powerplant or visit his web site at http://mac69108.math.cwu.edu:8080/.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Remotix 6.1.4 - Access all your computer...
Remotix is a fast and powerful application to easily access multiple Macs (and PCs) from your own Mac. Features: Complete Apple Screen Sharing support - including Mac OS X login, clipboard... Read more
MacFamilyTree 9.0.12 - Create and explor...
MacFamilyTree gives genealogy a facelift: modern, interactive, convenient and fast. Explore your family tree and your family history in a way generations of chroniclers before you would have loved.... Read more
ffWorks 2.0.4 - Convert multimedia files...
ffWorks, focused on simplicity, brings a fresh approach to the use of FFmpeg, allowing you to create ultra-high-quality movies without the need to write a single line of code on the command-line.... Read more
Apple Pages 10.0 - Apple's word pro...
Apple Pages is a powerful word processor that gives you everything you need to create documents that look beautiful. And read beautifully. It lets you work seamlessly between Mac and iOS devices, and... Read more
Numbers 10.0 - Apple's spreadsheet...
With Apple Numbers, sophisticated spreadsheets are just the start. The whole sheet is your canvas. Just add dramatic interactive charts, tables, and images that paint a revealing picture of your data... Read more
Keynote 10.0 - Apple's presentation...
Easily create gorgeous presentations with the all-new Keynote, featuring powerful yet easy-to-use tools and dazzling effects that will make you a very hard act to follow. The Theme Chooser lets you... Read more
Carbon Copy Cloner 5.1.16 - Easy-to-use...
Carbon Copy Cloner backups are better than ordinary backups. Suppose the unthinkable happens while you're under deadline to finish a project: your Mac is unresponsive and all you hear is an ominous,... Read more
PDFpenPro 11.2.2 - Advanced PDF toolkit...
PDFpenPro allows users to edit PDF's easily. Add text, images and signatures. Fill out PDF forms. Merge or split PDF documents. Reorder and delete pages. Create fillable forms and tables of content... Read more
PDFpen 11.2.2 - Edit and annotate PDFs w...
PDFpen allows users to easily edit PDF's. Add text, images and signatures. Fill out PDF forms. Merge or split PDF documents. Reorder and delete pages. Even correct text and edit graphics! Features... Read more
ScreenFlow 9.0.3 - Create screen recordi...
ScreenFlow is powerful, easy-to-use screencasting software for the Mac. With ScreenFlow you can record the contents of your entire monitor while also capturing your video camera, microphone and your... Read more

Latest Forum Discussions

See All

Same Room Games is a great collection of...
Staying at home under lockdown kinda sucks. Totally necessary, yes, but also more than a little anxiety-inducing and often boring. Thankfully, we've got lots of great multiplayer games to play with friends and keep us sane, the latest of which,... | Read more »
Bark Park is a joyfully silly multiplaye...
Bark Park is a charming, good-humoured game about competing against other players to claim as much territory as possible by peeing on nearby trees. Did I mention that everyone is playing as a dog? Makes things a little less weird. [Read more] | Read more »
The 5 Best Games Like Grindstone
Apple Arcade made a splash when it first launched, granting access to over 50 games as soon as it became available. Of those titles, the one that seemed to grab most people’s attention was Grindstone, a matching puzzle game from Capy Games. [Read... | Read more »
Awarding-winning puzzler Make One is now...
Make One is a game with a simple concept that it executes with flair and impressive levels of polish. It comes to us from developer Brazle and publisher PiG, and it's just landed this week for Android. At its core, Make One is a logic-based... | Read more »
Marvel Contest of Champions' latest...
Kabam's Marvel Contest of Champions has now teased some of the latest characters heading to the Battlerealm next month. Here's your chance to watch the new motion comic embedded below, Barons' War, before I spoil the surprise. [Read more] | Read more »
Why Calibria: Crystal Guardians is the p...
We could all use escapism right now, something to focus on and a project to feel part of during these times of social isolation. If you’re one of the many who’s turned to gaming to fill the lockdown void, Calibria: Crystal Guardians should be on... | Read more »
Mini Tank: Fire is a Worms-like, turn-ba...
Mini Tank: Fire is an online multiplayer game that takes a few cues from the likes of Worms and Shell Shock Live. It will feature 5v5 turn-based battles and is available now for both iOS and Android as a free-to-play game. [Read more] | Read more »
Poly is an endless runner for iOS where...
Poly is an endless runner from solo developer Denis Kakacka that's available now for iOS as a free-to-play game. It aims to bring a slight twist to the standard running formula by mixing up what you're actually controlling. [Read more] | Read more »
Reflex Unit 2 brings intense PvP battles...
Reflex Unit 2 will see players engaging in mech-based warfare, fending off waves and waves of autonomous robots that are threatening to destroy the planet. It's available now for iOS and Android. | Read more »
Snake Core is a modern take on a mobile...
Snake Core, from acclaimed indie developer Orangepixel, is a modern take a mobile classic: Snake. The idea is that you'll command a small army of troops as they go about attempting to take down a horde of invading aliens. [Read more] | Read more »

Price Scanner via MacPrices.net

Apple offers Certified Refurbished iPhone XS...
Apple has Certified Refurbished iPhone XS models available for up to $350 off MSRP, with prices starting at $699. Each iPhone is unlocked and comes with Apple’s standard one-year warranty and a new... Read more
Siri, Apple’s AI-Powered Virtual Assistant, N...
FEATURE: 04.01.20- Apple’s virtual assistant powered by AI (artificial intelligence), Siri, can answer almost any question you throw at it, from asking for today’s weather forecast to where the... Read more
Buy Apple’s 16″ 2.6GHz 6-Core MacBook Pro for...
Apple reseller DataVision has new 16″ 2.6GHz 6-Core MacBook Pros on sale for up to $170 off MSRP, each including free shipping. DataVision charges sales tax for NY, NJ, PA, and CA residents only. In... Read more
Boost Mobile 1-day Flash Sale: $100 off all A...
Boost Mobile is offering Apple’s 2019 iPhone 11 and 11 Pro models for $100 off MSRP. Boost is also offering the same $100 discount on new previous-generation iPhone XS, XR, X, 8, and 7 models. For... Read more
In stock! Apple’s new Mac Pro for $5995 with...
Apple reseller DataVision has the new 2019 Apple Mac Pro in stock today for $5995 ($5 off MSRP) including free shipping. DataVision charges sales tax for NY, NJ, PA, and CA residents only. If you don... Read more
Apple Sources Confirm Spring Media Event Canc...
NEWES: 03.31.20- A previously planned Apple media event scheduled to take place sometime this Spring that was rumored and widely expected to be held today, March 31, were confirmed by anonymous... Read more
Apple restocks 2017 13″ Dual-Core non-Touch B...
Apple has restocked a limited number of Certified Refurbished 2017 13″ 2.3GHz Dual-Core non-Touch Bar MacBook Pros starting at $1019. An standard Apple one-year warranty is included with each model,... Read more
Save $300 on the 13″ 2.4GHz MacBook Pro with...
Apple has a full line of Certified Refurbished 2019 13″ 2.4GHz 4-Core Touch Bar MacBook Pros available starting at $1529 and up to $300 off MSRP. Apple’s one-year warranty is included, shipping is... Read more
Just in! Apple’s new 2020 4-Core Mac mini $10...
B&H Photo has Apple’s new 2020 4-Core Mac mini in stock and on sale today for only $699 including free overnight delivery for many US addresses. Their price is $100 off MSRP, and it’s the lowest... Read more
New 2020 13″ Space Gray MacBook Airs on sale...
B&H Photo has Apple’s new 2020 13″ Space Gray MacBook Airs on sale today for $50 off Apple’s MSRP. While they don’t have stock today, preorders are accepted at this discount. Overnight shipping... Read more

Jobs Board

Sephora Merchandise/Operations Supervisor -...
Sephora Merchandise/Operations Supervisor - Apple Blossom Mall Location:Winchester, VA, United States- Apple Blossom Mall 1850 Apple Blossom Dr Job Read more
Sales Supervisor - *Apple* Blossom Mall - J...
Sales Supervisor - Apple Blossom Mall Location:Winchester, VA, United States- Apple Blossom Mall 1850 Apple Blossom Dr Job ID:1083621Store Hourly Positions Read more
*Apple* Mac Product Engineer - Barclays (Uni...
Apple Mac Engineer Whippany, NJ Support the development and delivery of solutions, products, and capabilities into the Barclays environment working across technical Read more
Essbase Developer - *Apple* - Theorem, LLC...
Job Summary Apple is seeking an experienced, detail-minded Essbase developer to join our worldwide business development and strategy team. If you are someone who Read more
Senior Software Engineer @ *Apple* - Theore...
Job Summary Apple is looking for a seasoned senior software engineer to join our worldwide business development and strategy team. This is an opportunity to lead a Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.