TweetFollow Us on Twitter

Editors, QUED/M
Volume Number:6
Issue Number:5
Column Tag:Kelly's Corner

QUED/M, Preditor, and Mactivator

By Dave Kelly, MacTutor Editorial Board

QUED/M™ vs. Preditor™

Back in the “good old days” when the Macintosh was still a newborn 128K baby, a good editor was hard to come by. Actually, the “good old days” weren’t as good as it is today. The “programmer’s” text editor in those days was EDIT. Today, there are several editors that can be helpful to you as a software developer, especially if you don’t like the editor that came with your language system.

Last month I mentioned a few words about Freditor, an editor for FORTRAN programmers. This month, let’s check out two other text editors that are very similar. Comparing QUED/M (pronounced “kwed-em”) and Preditor has been a difficult task because each has its advantages. I hope some of my comments here will help to sort out the differences.

Some of you are probably asking “What do I need another word processor for?”. First, please understand that these text editors are not designed to support fancy formatting of text and graphics for “desktop publishing”. They were written to provide a fast and easy way to work with text. You can still transfer the text to another word processor for final formatting. The additional features that are offered provide advantages over word processors. Their strong point is the ability to use powerful Macros and regular expression matching features. These features allow you to store, manipulate and retrieve large amounts of information quickly without restrictions imposed by structured data base or other programs. QUED/M is the descendant of QUED. Macro capability and other improvements were added to QUED when QUED/M was released. Preditor is the new kid on the block. Both provide many of the same features with some differences that I will discuss here.

I’ve created a comparison table to review some capabilities provided in QUED/M and Preditor. I’d like to preface this chart with one observation. Both programs are flexible and macros can be created in one application to perform some tasks that would be considered built in features in the other application. I don’t want to receive cards and letters telling me that by writing a macro, the features can be accomplished. I’ve tried to include that in my chart, but in case I missed any sorry about that. Creation of the chart was not that easy anyway. Preditor has a very organized manual with the features organized into logical sections. The QUED/M manual puts more emphasis on macros and so the features are explained throughout the manual. The index didn’t really help either. Section 11 covers all the menus in QUED/M so it was possible to round up most everything for the chart. I’m sure glad that QUED/M is more intuitive than its manual.

The comparison chart shows that QUED/M and Preditor are very similar in many ways. Both applications have “Open Window” dialogs for opening, but only Preditor has filter controls for extensions on file names. Automatic file saving is an option for saving the file automatically when a set number of keystrokes have been pressed. Preditor also can do an autosave after a specified number of minutes.

Text editing features are basic to both programs, but there are some minor differences. Preditor provides rectangular editing. Rectangular editing allows you to select a rectangle of text to cut and paste. This is more useful if you are doing tables of data. Overstrike typing allows you to replace text instead of insert text when editing. In Preditor the editing modes are selected through a Format menu that displays a format dialog. This sets the format for the entire document.

Preditor has a command called “Reformat text” that will format the text between a left and right column settings. The formatting can be set to break at word boundaries or at the column settings. Reformatting text inserts a return character at the right boundary giving you the appearance of wrapped text. QUED/M on the other hand lets you set the line length and the paragraphs wrap automatically at the end of the line without modifying your text. There is currently a bug with the Undo of Preditor’s “Reformat Text” command. All “editing” operations (all operations that affect the text) in Preditor ARE undoable. This includes tab conversion, change all, remove all impossibles, etc. Currently there is a simple patch (a 2 byte change) to fix the problem (this same problem exists with undo of tab conversion operations as well), and the patch fixes both. I haven’t seen the patch yet, but I expect that it fixes the problem satisfactorily. The chart indicates that Reformat Text is undoable, but that was without the patch. In QUED/M it is very conspicuous that every action is undoable. In Preditor, most actions are undoable, but without the bug patches mentioned, QUED/M’s Undo/Redo works better.

Preditor has a complete and easy to use on line help system (in case you can’t find your manual). A nice touch is that you can keep the help window open and switch to another window for editing. Some help systems I’ve seen, you must quit a modal type dialog before the help system relinquishes control. Preditor also supports collapsing text and a function called “Twiddle” that swaps the character before the selected text with the character after the selected text. I’m not sure what you would use this one for.

Preditor supports tags. Tags are an extremely powerful feature for people programming in C, Pascal and Fortran. It allows you to highlight any function or type name, and have Preditor immediately open the file that contains the definition and scroll the definition into view. The Tags feature also supports the standard MPW Commando interface. This brings us to another related area that is supported by Preditor. Preditor can read “language modules”, which are produced by the LDC (Language Definition Compiler) that comes with Preditor. Any language modules that are placed in the “Preditor Folder” will be available within Preditor. Preditor uses the language modules to obtain information about a particular programming language. This includes bracket and comment delimiters, reserved words, language syntax, file extensions, and more. Commonly used code can be set up as a template that may be “pasted” into your text. These language capabilities together with the tags capability make Preditor very attractive for programmers. Keep in mind that by using Macros in QUED/M could provide some features of the language modules, although these features would have to be developed before they could be used. Preditor has these features already.

Preditor also provides a glossary function for quick lookup/substitution of words or phrases. QUED/M will sort lines and compare differences between documents. Both programs have excellent search capability including searches for mismatched parenthesis or brackets. I like the way QUED/M displays the bracket pairs in the upper right corner of the document window’s title bar. This way gives you a visual feedback of the number of open brackets. Preditor also does what they call an incremental search. Incremental searching allows Preditor to search continuously as you enter text in the “Find What” text box. For example, if you type in the word “Hello”; after you type the ‘H’ Preditor will find the first ‘H’, then after you type the ‘e’, Preditor will find the first occurrence of “He”, and so on.

With all I haven’t said much about macro capability. In general, any feature that can be done manually, also can be done in a macro. QUED/M is very strong in the macro area, while Preditor is strong in its language support. The result of this is that both are good text editors and will do the job, but each has its own advantages.

QUED/M is available from:

Paragon Concepts, Inc.

990 Highland Drive, Suite 312

Solana Beach, CA. 92075

(619) 481-1477 or

(800) 922-2993 outside California

Price: $119.00

Preditor is available from:

Evatac Software

P. O. Box 219093

Portland, OR. 97225

(503) 297-6175 or

AppleLink: D3852

Delphi: CARSTENSEN

Compuserve: 73627,2762

GEnie: T.CARSTENSEN

Requires System 3.2 or later and 512K RAM minimum.

Price: $90.00

Mactivator

I hate copy protection. This subject has been beat to death so many times that it is pathetic. But lately, I’ve been seeing some ads on hardware copy protection schemes that turns my stomach to think about it. One ad shows a device connected to the ADB port. I don’t have any information about the ADB device so I can’t say much about it. Another scheme has shown up from Software Security, Inc. called The Mactivator that plugs into the SCSI port. I recently received a demo version of the Mactivator.

Before continuing I must say, copying software illegally is wrong, there’s no question about that. But setting all that aside, let’s take a look at The Mactivator.

The Mactivator plugs into the SCSI port of any Macintosh. It does not require power and doesn’t use up a SCSI address. Several Mactivator units may be plugged in at once (they say as many as 10 may be daisy chained). What? Doesn’t this interfere with normal SCSI operations? Before answering this question lets take a look at how it works.

The key to the Mactivator is a custom ASIC chip. A series of bytes is sent to the chip via the SCSI port. These byte increment and/or decrement a set of counters on the device. When the counters reach a factory-programmed Product ID value, the Mactivator sends out an acknowledge response which can be tested for. If no signal is received, it is assumed that the device is not present and the application program can take necessary action (like erasing your hard disk just kidding).

The counters are divided into two sections. The Product ID side is programmed at your factory with your unique code. There are over 250 thousand possible codes. The other selection is the Custom ID side, that contains selectors or filters. These values can be programmed by Software Security, Inc. to your specifications, or you can use an optional field programming unit to program the filters yourself. Both sides of the device may be accessed incrementally, decrementally, and in an AND/OR mode. By combining these modes and other features, the device can be set up to respond differently to every interrogation.

You don’t have to perform the entire interrogation at one time. Since the device has so many ways to be programmed it is nearly impossible to duplicate the device. The device can be used for serialization, multiple modules, and multiple package protection.

Does the device interfere with normal SCSI operations? Answer: It shouldn’t. The device is counting on the fact that it is unlikely that any normal SCSI operations would send the apparently random series of bytes the Mactivator is programmed to respond to. This scares me. When I tried out the demo that Software Security sent me, my 80 Meg. CMS internal hard hung up when I used the demo software. A telephone call soon told me that a fix was on its way to me since there was a known problem when CMS drives were used. As a developer can I afford to risk the reputation of my software on a device like this? What if there is some other peripheral that comes along in the future which isn’t compatible? Hopefully the response will be as quick when that happens as it was for the CMS fix.

OK, I admit that if copy protection must be used that a device like this one would be a good way to do it. There are a few side effects which come with any device like this. One of the biggest legitimate complaints about software copy protection is the way that the protection always seems to get in the way of everyday operation of the software. The need for a master (or key) disk and not being able to copy the application for backups or convenience are two of many complaints. If your software will always be run only at one location then a device like Mactivator would like not give the user any grief.

A problem that I have faced since I work for a big company is that sometimes I do work at home. I have favorite software which I have purchased, but the company has not. I still have a legal right to use my copy on any one computer at a time, but it isn’t the same computer each time. I often use my legal copy while at work. A device like Mactivator would be an added burden that I wouldn’t want.

The Mactivator could be moved from one machine to another, but sometimes this is awkward depending on what other equipment is also installed. And the Mactivator uses the system SCSI connector which means that it must connect to the CPU although a change in connector would make it possible to mate to other SCSI peripherals. This means that SCSI peripherals connected to a CPU must be disconnected to allow the Mactivator to be installed.

I have mixed feelings about this kind of device. If you must have copy protection then I definitely recommend using something like this, but I still feel that copy protection should be avoided wherever and whenever possible.

The Mactivator is available from:

Software Security, Inc.

1011 High Ridge Road

Stamford, CT. 06905

1-800-333-0407

In CT: 203-329-8870

FAX 203-329-7428

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Ableton Live 11.3.11 - Record music usin...
Ableton Live lets you create and record music on your Mac. Use digital instruments, pre-recorded sounds, and sampled loops to arrange, produce, and perform your music like never before. Ableton Live... Read more
Affinity Photo 2.2.0 - Digital editing f...
Affinity Photo - redefines the boundaries for professional photo editing software for the Mac. With a meticulous focus on workflow it offers sophisticated tools for enhancing, editing and retouching... Read more
SpamSieve 3.0 - Robust spam filter for m...
SpamSieve is a robust spam filter for major email clients that uses powerful Bayesian spam filtering. SpamSieve understands what your spam looks like in order to block it all, but also learns what... Read more
WhatsApp 2.2338.12 - Desktop client for...
WhatsApp is the desktop client for WhatsApp Messenger, a cross-platform mobile messaging app which allows you to exchange messages without having to pay for SMS. WhatsApp Messenger is available for... Read more
Fantastical 3.8.2 - Create calendar even...
Fantastical is the Mac calendar you'll actually enjoy using. Creating an event with Fantastical is quick, easy, and fun: Open Fantastical with a single click or keystroke Type in your event details... Read more
iShowU Instant 1.4.14 - Full-featured sc...
iShowU Instant gives you real-time screen recording like you've never seen before! It is the fastest, most feature-filled real-time screen capture tool from shinywhitebox yet. All of the features you... Read more
Geekbench 6.2.0 - Measure processor and...
Geekbench provides a comprehensive set of benchmarks engineered to quickly and accurately measure processor and memory performance. Designed to make benchmarks easy to run and easy to understand,... Read more
Quicken 7.2.3 - Complete personal financ...
Quicken makes managing your money easier than ever. Whether paying bills, upgrading from Windows, enjoying more reliable downloads, or getting expert product help, Quicken's new and improved features... Read more
EtreCheckPro 6.8.2 - For troubleshooting...
EtreCheck is an app that displays the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to... Read more
iMazing 2.17.7 - Complete iOS device man...
iMazing is the world’s favourite iOS device manager for Mac and PC. Millions of users every year leverage its powerful capabilities to make the most of their personal or business iPhone and iPad.... Read more

Latest Forum Discussions

See All

‘Junkworld’ Is Out Now As This Week’s Ne...
Epic post-apocalyptic tower-defense experience Junkworld () from Ironhide Games is out now on Apple Arcade worldwide. We’ve been covering it for a while now, and even through its soft launches before, but it has returned as an Apple Arcade... | Read more »
Motorsport legends NASCAR announce an up...
NASCAR often gets a bad reputation outside of America, but there is a certain charm to it with its close side-by-side action and its focus on pure speed, but it never managed to really massively break out internationally. Now, there's a chance... | Read more »
Skullgirls Mobile Version 6.0 Update Rel...
I’ve been covering Marie’s upcoming release from Hidden Variable in Skullgirls Mobile (Free) for a while now across the announcement, gameplay | Read more »
Amanita Design Is Hosting a 20th Anniver...
Amanita Design is celebrating its 20th anniversary (wow I’m old!) with a massive discount across its catalogue on iOS, Android, and Steam for two weeks. The announcement mentions up to 85% off on the games, and it looks like the mobile games that... | Read more »
SwitchArcade Round-Up: ‘Operation Wolf R...
Hello gentle readers, and welcome to the SwitchArcade Round-Up for September 21st, 2023. I got back from the Tokyo Game Show at 8 PM, got to the office here at 9:30 PM, and it is presently 11:30 PM. I’ve done what I can today, and I hope you enjoy... | Read more »
Massive “Dark Rebirth” Update Launches f...
It’s been a couple of months since we last checked in on Diablo Immortal and in that time the game has been doing what it’s been doing since its release in June of last year: Bringing out new seasons with new content and features. | Read more »
‘Samba De Amigo Party-To-Go’ Apple Arcad...
SEGA recently released Samba de Amigo: Party-To-Go () on Apple Arcade and Samba de Amigo: Party Central on Nintendo Switch worldwide as the first new entries in the series in ages. | Read more »
The “Clan of the Eagle” DLC Now Availabl...
Following the last paid DLC and free updates for the game, Playdigious just released a new DLC pack for Northgard ($5.99) on mobile. Today’s new DLC is the “Clan of the Eagle" pack that is available on both iOS and Android for $2.99. | Read more »
Let fly the birds of war as a new Clan d...
Name the most Norse bird you can think of, then give it a twist because Playdigious is introducing not the Raven clan, mostly because they already exist, but the Clan of the Eagle in Northgard’s latest DLC. If you find gathering resources a... | Read more »
Out Now: ‘Ghost Detective’, ‘Thunder Ray...
Each and every day new mobile games are hitting the App Store, and so each week we put together a big old list of all the best new releases of the past seven days. Back in the day the App Store would showcase the same games for a week, and then... | Read more »

Price Scanner via MacPrices.net

Apple AirPods 2 with USB-C now in stock and o...
Amazon has Apple’s 2023 AirPods Pro with USB-C now in stock and on sale for $199.99 including free shipping. Their price is $50 off MSRP, and it’s currently the lowest price available for new AirPods... Read more
New low prices: Apple’s 15″ M2 MacBook Airs w...
Amazon has 15″ MacBook Airs with M2 CPUs and 512GB of storage in stock and on sale for $1249 shipped. That’s $250 off Apple’s MSRP, and it’s the lowest price available for these M2-powered MacBook... Read more
New low price: Clearance 16″ Apple MacBook Pr...
B&H Photo has clearance 16″ M1 Max MacBook Pros, 10-core CPU/32-core GPU/1TB SSD/Space Gray or Silver, in stock today for $2399 including free 1-2 day delivery to most US addresses. Their price... Read more
Switch to Red Pocket Mobile and get a new iPh...
Red Pocket Mobile has new Apple iPhone 15 and 15 Pro models on sale for $300 off MSRP when you switch and open up a new line of service. Red Pocket Mobile is a nationwide service using all the major... Read more
Apple continues to offer a $350 discount on 2...
Apple has Studio Display models available in their Certified Refurbished store for up to $350 off MSRP. Each display comes with Apple’s one-year warranty, with new glass and a case, and ships free.... Read more
Apple’s 16-inch MacBook Pros with M2 Pro CPUs...
Amazon is offering a $250 discount on new Apple 16-inch M2 Pro MacBook Pros for a limited time. Their prices are currently the lowest available for these models from any Apple retailer: – 16″ MacBook... Read more
Closeout Sale: Apple Watch Ultra with Green A...
Adorama haș the Apple Watch Ultra with a Green Alpine Loop on clearance sale for $699 including free shipping. Their price is $100 off original MSRP, and it’s the lowest price we’ve seen for an Apple... Read more
Use this promo code at Verizon to take $150 o...
Verizon is offering a $150 discount on cellular-capable Apple Watch Series 9 and Ultra 2 models for a limited time. Use code WATCH150 at checkout to take advantage of this offer. The fine print: “Up... Read more
New low price: Apple’s 10th generation iPads...
B&H Photo has the 10th generation 64GB WiFi iPad (Blue and Silver colors) in stock and on sale for $379 for a limited time. B&H’s price is $70 off Apple’s MSRP, and it’s the lowest price... Read more
14″ M1 Pro MacBook Pros still available at Ap...
Apple continues to stock Certified Refurbished standard-configuration 14″ MacBook Pros with M1 Pro CPUs for as much as $570 off original MSRP, with models available starting at $1539. Each model... Read more

Jobs Board

Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Retail Key Holder- *Apple* Blossom Mall - Ba...
Retail Key Holder- APPLE BLOSSOM MALL Brand: Bath & Body Works Location: Winchester, VA, US Location Type: On-site Job ID: 03YM1 Job Area: Store: Sales and Support Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.