TweetFollow Us on Twitter

Dec 89 Letters
Volume Number:5
Issue Number:12
Column Tag:Letters

Letters

By David E. Smith, Editor & Publisher, MacTutor

There IS an OOP Book

James Plamondon

San Mateo, CA

I have just received and read my copy of the September issue of MacTutor, and was pleased to discover that it was up to its usual high standards. Unfortunately, I was horrified to see one piece of misinformation presented -- however unintentionally -- as fact, when the truth could be of great use to your readership.

In the article MacOOPs!, by Jean-Denis Muys-Vasovic, on page 102, in the first paragraph, the author says that “Algorithms + Data Structures = Programs”, by Niklaus Wirth, was the book that established the case for structured programming in the seventies. This is entirely correct.

Unfortunately, the author goes on to say that ‘This technology [OOP] has not yet got its “Algorithms + Data Structures = Programs” ’, meaning that there is not yet any single book on OOP that explains its concepts, advantages, implementation, and so on. This statement has not been true for more than a year.

Everyone who has an interest in OOP should run -- not walk -- to the nearest computer bookstore and buy a copy of Bertrand Meyer’s book, “Object-Oriented Software Construction”, published in 1988 by Prentice Hall (about $40). It is without a doubt the most comprehensive, concise, and yet readable book on Object-Oriented Design and Programming to date -- and I have no doubt that it will soon be considered to be as important to the success of OOP as Wirth’s book was to structured programming.

Just as Wirth’s book explained and made the case for block structuring, strong typing, and functional decomposition, Meyer’s book explains and makes the case for object-oriented design, based on considerations of correctness, robustness, extendibility, reusability, and compatibility. Meyer’s book, like Wirth’s, combines the rigorous precision of computer science with the practical aspects of software engineering. Wirth used his own, new language, Pascal, to present his ideas, because the other languages of the time were inadequate. Likewise, Meyer uses his own language, Eiffel, to present his ideas, because no other existing language so elegantly addresses both the theoretical and practical issues of object-oriented design.

Pascal went on to become one of the major computer languages of the seventies and eighties, due to its close association with structured programming. Its commercial use was hampered by the fact that it was designed to be a teaching aid, not a language for software engineering. Eiffel, on the other hand, was designed from the first to be a practical tool for the development of commercial software. Its future is unlimited.

In every discipline, its practitioners struggle for years on the fringes of great breakthroughs -- gravity, natural selection, relativity, plate tectonics -- until some author comes along and puts it all together. That is what Wirth did for structured programming, and that is what Meyer has done for object-oriented programming. I was a geologist during the battles that led to the acceptance of plate tectonics, so I’ve learned to recognize a paradigm shift when I see one.

If knowledge is power, and the future of programming is OOP, then this book will give you the power to control the future of programming. Take the day off, grab the company credit card, go to the nearest computer bookstore, buy Meyer’s book, and don’t listen to another word about OOP until you’re done reading it.

Stop reading this letter! Get moving! Run!

What, you’re still here?

Virus?

George Patail

APO New York

I am new to Mac programming and an avid reader of MacTutor and need your help regarding Mac viruses and their eradication. My system (a Mac II with an 80MB HD) had a bad case of the “hangs” lasting for 15-20 minutes on bootup and when launching applications. I cleared out all the files and reinstalled them after examining each one with ResEdit. I installed Vaccine on my system and it seems to keep a vigilant eye on any attempts to add additional CODE resources. It warns me and asks for the usual permission to let it add or deny access to the CODE resource.

However running LS Pascal 2.0, it asks for permission with the usual message for every source file I try to add to a project. I launched ResEdit and examined my System Folder for any telltale signs of Scores or nVIR viruses following Max Rochlin’s instructions (Mousehole Report, MacTutor June 1988). None were found! However, the LS Pascal application’s CODE id=0’s eleventh word displays ‘038A’ and the tenth displays ‘4EED’. According to MaxR this is a sure sign of Scores infection! But I could not locate any additional CODE segments corresponding to 038A which is two higher than the next, nor atpl id 128, data id -4001, inits 6, 10, 17, _Desktop and Scores files in the System Folder. I checked the master LS Pascal 2.0 disks I got from Think and they too display the same anomalies with 4EED and 038A. Is the LS Pascal infected, or is it normal code for LS? Do you think it is a new strain? It does not seem to spread to other applications so far. But I am at a loss as to how to combat this other than turning Vaccine off, which I don’t want to do knowing if it is safe to run LS Pascal. I am stationed in Heidelberg Germany and the local Apple reps could not answer anything beyond the most elementary questions.

[LS Pascal adds code resources to its project file each time you compile, so naturally Vaccine will intercept the attempt to add a code type resource, like CODEs and CDEFs. My copy of LS Pascal also contained the same words in CODE 0. I have been using VIREX by HJC Software and Vaccine before without a hint of virus troubles. A quick call to Symantec said that the jump table is beyond that point and those are the words that should be there. So my opinion is that you don’t have a virus. I would suggest your ‘hangs’ are due to INITs. One of them is likely to be giving you problems.

If you are worried about virus problems, may I suggest that VIREX or another commercial virus program. It is my understanding that Vaccine is not continually updated as other commercial programs. -ed]

To Paul Onstad

John Baxter

Port Ludlow, WA

As others have noted, the solution to Paul Onstad’s question about opening a resource fork in a desired folder is straight forward (especially for those of us who have been “around” the Mac since the early days). Simply save the current default volume with GetVol, then set the default volume to the “volume” (actually a working directory in most cases) returned by the SFPutFile call (or earlier SFGetFile call if replacing a file). Then use the old resource file opening calls without concern. When completed, set the default volume back.

Furthermore, when rewriting a file as a result of Save, it is not necessary to erase the old file. It is sufficient to set the EOF of the data fork to zero before writing the new data. This will leave the resource fork, the creation date, and the position within the folder as seen by Finder unchanged. Only for Save As should it be necessary to copy the resource fork. [It’s actually only necessary to set EOF to the new value, and then only if the old file is larger. if the new EOF value is known before starting to write the data, this might be preferred.] The SetEOF call takes the file’s reference number and the desired new EOF value, extending or truncating the file as needed. Inside Macintosh, Vol. II, pg. 93.

More Paul Onstad

John H. Roth, Jr.

Chicago, IL

Your new cover style almost lost you a reader-I found your August issue on the magazine rack by accident. For a while I thought you had gone under (perish the thought).

By now, you’ve probably got a dozen letters about Paul Onstad’s resource fork problem. The error from OpenRFPerm is because the new resource fork doesn’t have a resource map. This can be corrected by a call to CreateResFile, after the call to Create but before the call to OpenRFPerm. The sequence of calls is crucial; odd things can happen if Create is not called first. This is explained in Tech Note 101.

The basic misconception seems to be that the Create call builds both forks of the file. Actually, it builds an empty directory entry. For the data fork, Open is then sufficient, but for the resource fork, initialization data has to be written into it before the Resource Manager can do its thing.

THINK C 4.0 Bugs

William Modesitt

Kaneohe, HI

There are two known bugs in the new THINK C 4.0. Both involve scanf. When using the standard library ANSI, scanf will not work correctly for float values less than .1. When using the library ANSI_881, scanf in general does not work correctly for float values. I was told by THINK C technical staff that these were the only known bugs, and they were both rather nasty. The fixes are shown below.

Buggy version:

case -2:
 if (c >= ‘0’ && c <= ‘9’) {
 F.valid = TRUE;
 if (c != ‘0’ || D.sig[0]) {
 if (D.sig[0] < sizeof D.sig - 1)
 D.sig[++D.sig[0]] = c;
 if (F.dot)
 --D.exp;
 }
 }

Correct version:

/* 1 */

 if (c >= ‘0’ && c <= ‘9’) {
 F.valid = TRUE;
 if (c != ‘0’ || D.sig[0]) {
 if (D.sig[0] < sizeof D.sig - 1)
 D.sig[++D.sig[0]] = c;
 } /* paren was moved here from two lines below */
 if (F.dot)
 --D.exp;
 }

Buggy version (881):

register struct decrec *d;
void *p;
{
 short  excp class, c = ‘0’;
#ifdef _MC68881_
 register short *q = p;
 
 p = q + 1;
#endif
Correct version (881):
register struct decrec *d;
void *p;
{
 short  excp class, c = ‘0’;
#ifdef _MC68881_
 register short *q = p;
 
 if (code == FFEXT)  /* add this line */
 p = q + 1;
#endif

Buggy version (881):

#ifdef _MC68881_
 q[0] = q[1];
 q[1] = 0;
#endif
 return;

Correct version (881):

/* 2 */

#ifdef _MC68881_
 if (code == FFEXT) { /* add this line */
 q[0] = q[1];
 q[1] = 0;
 } /* add this line */
#endif
 return;

Once these changes have been made, you should “make” all four ANSI libraries by choosing the make option, check scanf.c, then “make” it. Any projects that you have will automatically load the new ANSI library for you next time you update.

And now for something completely different. I have tried to find a way to determine the current volume reference number or working directory reference number for my current application during run time so I can write to it’s data fork. Along the same line, I think, I would like to do the following: Implement SFGetFile, exit, find out where I am, move to the parent directory, and implement SFGetFile again in the new (parent) directory. What I need is a function called “WhereAmI”. Any help would be greatly appreciated.

Linear Equation Error

Wilfred Long, Jr.

Montgomery Village, MD

In C. H. Friend’s Linear Equations True Basic examples from January’s letters column, he couldn’t produced the output shown in the Multiple Linear Regression” segment by running the source as listed. All the errors are on page 109 in the last third of the program following the REM statement depicting how H-P Basic allows solution of the linear system.

In the MAT PRINT USING formatter for “Coefficients” there should be three leading dashes instead of two and the comma should be a period.

The LET statement in the vector dot-product loop following “residuals:” is incomplete-no product is indicated. It should be written either:

LET Y2(I) = Y(I,1) * Y(I,1)

or

LET Y2(I) = Y(I,1)^2

In the second from the last PRINT USING statement, the variable SSR should be SSA in both instances. There is no variable SSR, but SSA produces the value 399.454 shown in the last results-output line attributed to SSR.

Finally, in the last PRINT USING formatter for variable ES2, the comma again should be a period.

There are a couple of incorrect values in the results-output, but they’ll be obvious when the corrected program runs.

Fulfilling A Dream

Natalia Kolodziejska

Wroclaw, Poland

I am an 11-year old Polish schoolgirl dreaming of an Apple Macintosh.

Poland is full of personal computers. There are many Atari, Commodore, IBM and Sinclair/Timex computers.

There also are other computers in use. However, the Apple Macintosh is absent in Poland. Anyway, I was lucky enough to see and use this computer some times. I am sure it would be my best friend.

However, I have a very little chance to come into its possession by myself. I simply lack the proper means. So, perhaps somewhere in the world there are people or institutions that have one superfluous (used) Macintosh which could be donated to me. (I would also welcome a printer and some software.) Please forward this letter to your readers and friends. Everyone can contact me, even if he or she can help me to only some extent.

Using the Macintosh I could better prepare myself for life in the next century.

My best greetings,

Natalia Kolodziejska

ul. Drzewieckiego 16/4

PL 54-129 Wroclaw

Poland

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Final Cut Pro 10.6.4 - Professional vide...
Redesigned from the ground up, Final Cut Pro combines revolutionary video editing with a powerful media organization and incredible performance to let you create at the speed of thought.... Read more
iMovie 10.3.4 - Edit personal videos and...
With a streamlined design and intuitive editing features, iMovie lets you create Hollywood-style trailers and beautiful movies like never before. Browse your video library, share favorite moments,... Read more
Motion 5.6.2 - Create and customize Fina...
Motion is designed for video editors, Motion 5 lets you customize Final Cut Pro titles, transitions, and effects. Or create your own dazzling animations in 2D or 3D space, with real-time feedback as... Read more
iMazing 2.15.8 - Complete iOS device man...
iMazing is the world’s favourite iOS device manager for Mac and PC. Millions of users every year leverage its powerful capabilities to make the most of their personal or business iPhone and iPad.... Read more
VueScan 9.7.90 - Scanner software with a...
VueScan is a scanning program that works with most high-quality flatbed and film scanners to produce scans that have excellent color fidelity and color balance. VueScan is easy to use, and has... Read more
Compressor 4.6.2 - Adds power and flexib...
Compressor adds power and flexibility to Final Cut Pro X export. Customize output settings, work faster with distributed encoding, and tap into a comprehensive set of delivery features. Features:... Read more
Capture One 15.3.2.11 - RAW workflow sof...
Capture One is a professional RAW converter offering you ultimate image quality with accurate colors and incredible detail from more than 400 high-end cameras - straight out of the box. It offers... Read more
Vivaldi 5.4.2753.28 - An advanced browse...
Vivaldi is a browser for our friends. We live in our browsers. Choose one that has the features you need, a style that fits and values you can stand by. From the look and feel, to how you interact... Read more
Parallels Desktop 18.0.0 - Run Windows a...
Parallels allows you to run Windows and Mac applications side by side. Choose your view to make Windows invisible while still using its applications, or keep the familiar Windows background and... Read more
TechTool Pro 16.0.1 - Hard drive and sys...
TechTool Pro has long been one of the foremost utilities for keeping your Mac running smoothly and efficiently. With the release of this version, it has become more proficient than ever. Main... Read more

Latest Forum Discussions

See All

Turn-Based RPG ‘Avatar: Generations’ Sof...
Square Enix London Mobile, Navigator Games, and Paramount Consumer Products just announced that the turn-based RPG Avatar: Generations based on Nickelodeon’s Avatar: The Last Airbender is soft launching this month for mobile. Avatar: Generations is... | Read more »
Tower of Fantasy launches today and brin...
Level Infinite and Hotta Studio have announced the release of their very ambitious looking shared open world MMORPG Tower of Fantasy. With its cross-platform functionality between PC and mobile, it looks to be one to roll the dice on and enjoy at... | Read more »
‘Genshin Impact’ Version 3.0 Gets a New...
After HoYoverse released Genshin Impact (Free) version 2.8 on all platforms, the company has slowly been teasing the major upcoming 3.0 update. This update features the Sumeru region with many characters. While details on the update including a... | Read more »
Out Now: ‘Tower of Fantasy’, ‘Tightrope...
Each and every day new mobile games are hitting the App Store, and so each week we put together a big old list of all the best new releases of the past seven days. Back in the day the App Store would showcase the same games for a week, and then... | Read more »
SwitchArcade Round-Up: ‘Book Quest’, ‘Cl...
Hello gentle readers, and welcome to the SwitchArcade Round-Up for August 10th, 2022. In today’s article, we’ve got a little news about an update to a game I really like, a few new releases to summarize, and some sales to look at. A bit of a quiet... | Read more »
‘Pine Tar Poker’ is an Otherworldly Poke...
Developer BJ Malicoat, who put out the well-received and former Apple Game of the Day pick Downwordly in June of last year, is back working on another mobile game project called Pine Tar Poker, and it has caught my attention. Why? Because it’s a... | Read more »
Darkness Rises celebrates four years of...
Four years of uptime for a mobile game is akin to eternity, and this is exactly the milestone that Darkness Rises has reached. It is important for developers to keep updating to keep the game fresh, and NEXON has announced a massive anniversary... | Read more »
Keep Your Smatphone’s Case On When Using...
The original Gamevice was born as a sort of offshoot of the weird Wikipad gaming tablet/controller/hybrid thing way back in 2014. Interestingly, the first Gamevice controller for iOS only supported the iPad mini and launched in 2015, with versions... | Read more »
SwitchArcade Round-Up: A ‘Splatoon 3’ Ni...
Hello gentle readers, and welcome to the SwitchArcade Round-Up for August 9th, 2022. In today’s article, we’ve got some news about a Splatoon 3 Nintendo Direct, a review of QUByte’s Thunderbolt Collection, a single new release summary, and the usual... | Read more »
Orangepixel’s Pacifist Survival Game ‘Re...
Back in June we learned that long-time mobile developer Orangepixel, who also makes games for PC and consoles (including the Atari VCS!), would be bringing the unique survival game Residual to mobile devices sometime this year. Originally launched... | Read more »

Price Scanner via MacPrices.net

Apple has 24-inch M1 iMacs available starting...
Apple has 24-inch M1 iMacs with M1 CPUs (8-core CPU/7-core GPU) available today in their Certified Refurbished store for $1099 shipped. Their price is $200 off standard MSRP. Each iMac is in like-new... Read more
13″ M1 MacBook Airs in stock today for $799,...
QuickShip Electronics has open-box return 13″ M1 MacBook Airs in stock and on sale for $200 off MSRP on their eBay store right now, each with free express delivery. According to QuickShip, “The item... Read more
In stock today: Mac Studio models for up to $...
Apple retailer Expercom has Mac Studio models in stock today and on sale for up to $400 off Apple’s MSRP, depending on configuration. Their prices are the lowest price available for a Mac Studio from... Read more
Mac mini with M1 CPU and 512GB of storage on...
Amazon has the M1 Mac mini with a 512GB SSD in stock today on sale for $749.99 including free shipping. Their price is $150 off Apple’s MSRP, and it’s the lowest price available for this... Read more
Need a Mac or iPad for school? Get a free App...
Apple’s Back to School promotion for 2022 continues to run through September 26, 2022. As part of this promotion, Apple will include a free $150 Apple Gift Card with the purchase of any MacBook Air,... Read more
Apple Watch SE on sale for $50 off MSRP
Amazon has Apple Watch SE GPS models on sale for $50 off MSRP for a limited time, each including free shipping. Their prices are the lowest currently available for SE Watches: – 40mm Apple Watch SE... Read more
Save $310 on a 14″ 24-core GPU M1 Max MacBook...
Save $310 on 14″ MacBook Pros with 24-core M1 Max processors at Apple (32GB RAM/1TB SSD) with these Certified Refurbished models in stock today for $2789 in Space Gray or Silver colors. Regular price... Read more
14″ M1 Pro MacBook Pros available today at Ap...
Apple has Certified Refurbished standard-configuration 14″ MacBook Pros with M1 Pro CPUs available today for up to $250 off original MSRP, starting at $1799. Each model features a new outer case,... Read more
13″ MacBook Air with M2 CPU, in Starlight, on...
Apple retailer Expercom has the new Starlight 13″ MacBook Air with an M2 CPU (8GB RAM/256GB SSD) on sale for $1135.05, shipped, through August 12, 2022. Their price is $64 off Apple’s MSRP, and it’s... Read more
14″ M1 Pro MacBook Pro with 1TB SSD on sale f...
Expercom is offering a $200 instant discount on the 14″ M1 Pro MacBook Pro with a 1TB SSD through August 12, 2022. Their discount reduces the price of this configuration to $1999 shipped — the lowest... Read more

Jobs Board

Solutions Engineering Manager - *Apple* - S...
…in our Hardware and Advanced Solutions group leading and developing our Apple technical practice to increase revenue and profitability. The ideal candidate would Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Sephora Beauty Advisor - *Apple* Blossom Ma...
Sephora Beauty Advisor - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.