TweetFollow Us on Twitter

Data Conversion
Volume Number:4
Issue Number:5
Column Tag:Basic School

Quick & Dirty Data Conversion

By Dave Kelly, MacTutor Editorial Board

FILE IMPORT/EXPORT with BASIC

Over the years, one of the most beneficial uses for Basic is the ability to quickly write programs to import/export data to and from data bases. This also provides a “quick and dirty” way to convert data or suppress unwanted characters. I’d like to explain/complain about the process and some of the problems that I have encountered.

My first major data conversion came a couple of years ago when I converted 30,000 names in a mail list from my Apple //e to the Macintosh. Yes, this was quite a feat, mostly because of the bottle neck which the dinky 143K floppy drives allowed on the Apple //. And you thought the Mac 400K drives were small! Anyway, on the Apple //e I was using DB MASTER, a now orphaned product, with some small support still available from a consulting firm in Northern California. There may be some of you that are familiar with DB MASTER (sometimes it was referred to as DB MONSTER). DB MASTER was great for mail lists and still would be today except for it’s slow speed (that’s partly the Apple //s fault).

The process went something like this: First the data needed to be converted from DB MASTER file format to ASCII so that I could direct connect the Mac and the //e together. DB MASTER utilities includes an export utility which would convert files to either DIF or a “One Field per Line” format. The utilities converted my mail list from my Sider hard disk to about 50 143K floppy disks (UGH!). Next the ASCII needed to be converted from Apple // ASCII to ”the rest of the world” ASCII format. ASCII EXPRESS telecommunications software provides a conversion utility for doing this (If they didn’t I’d have to use my own Basic program to convert it myself. Next each disk was converted via direct null modem connection to the Mac. Whew!

To make a long story (and many hours) short, the mail list was now on the Mac, but somehow during the process some control characters were intermixed in the files. Omnis 3 would not read the files with these control characters so it was BASIC to the rescue. There are 128 standard ASCII characters of which the first 31 characters are control characters, traditionally used for teletype terminals. The problem was easily solved by writing a Basic routine to read in the file, filter out the bad characters and rewrite the file. Compile the program to speed it up!

Control Character Filter
‘ ©MacTutor, 1988
‘ By Dave Kelly
‘ MSBASIC

x$=FILES$(1,”TEXT”)
IF x$=”” THEN END
OPEN x$ FOR INPUT AS #1
OPEN “Filter Output” FOR OUTPUT AS #2
WHILE NOT EOF(1)
    Char$=INPUT$(1,1)
    IF ASC(Char$)>=32 THEN PRINT #2,Char$;
    IF Char$=CHR$(13) THEN PRINT #2,Char$;
WEND
CLOSE #1
CLOSE #2
END

That’s ok for simple filtering. Things may need to be more complex if the original file contains unexpected characters in it. Recently, I came across the need to convert data stored in a FileMaker Plus file in order to do some simple, but unusual calculations. As drafting is done for test equipment the progress is logged into a FileMaker Plus file. Each drawing number is entered with its own charge number and the date is entered indicating the start or completion of stages of the drawing process. Occasionally the boss (who is always right because he is the boss) wants a drawing status report according to charge number (there are multiple drawings per charge number). FileMaker Plus will give the total number of drawings but only after searching for each of the charge numbers and dates individually. BASIC to the rescue.

The Drawing Count program was written to count progress of each of the charge numbers. A file is opened for input and another file for output. Each field was previously exported to a BASIC formatted file and is read by the Basic program in the same order which it was written. The charge number is saved, but each of the date fields is replaced by a flag (0 or 1) which indicated if there was anything in the date field. These 0s and 1s are added together to get the totals after the data is sorted. The sort routine could have been beefed up but, for a “quick and dirty” program, it does the job. The program was compiled with the MS Basic compiler which provided adequate speed results.

If you are wondering why ZBasic wasn’t used here, so am I. Actually, I ran into a small problem which appears to be a bug with ZBasic 4.01 while reading the FileMaker Plus exported text files. Although ZBasic’s INPUT# statement is supposed to read data from the file until a carriage return, <COMMA>, End-Of-File, or 255 characters are encountered, when ZBasic saw a comma followed by a carriage return, the null between the comma and carriage return was skipped and the next field (from the next record) was read in. The data looks like this:

“ITEM1”,”ITEM2",”ITEM3",
“ITEM4”,”ITEM5",”ITEM6",”ITEM7"

The null field after item3 was skipped and ITEM4 is read in. This is how data is formatted when dumped in comma delimited format as with FileMaker Plus. Sorry, Zedcor.

COORDINATE WINDOW
DEF OPEN “TEXTDAVE”
BREAK ON
filename$=FILES$(1,”TEXT”,,vol%)
IF filename$=”” THEN END
OPEN “I”,#1,filename$,,vol%
INPUT #1,A$,B$,C$,D$
PRINT @(1,10)A$,B$,C$,D$
CLOSE 1

Another file conversion problem to deal with involves the conversion of text which has been dumped from text fields. FileMaker Plus, for example, inserts an end of line mark at the end of each line when it exports data to a file. When the data is read into another program which doesn’t use the end of line character to mark the end of lines (because the text is word wrapped and reformattable). If you read the FileMaker text field into Double Helix II for example, the end of line character shows up in the text field as an undefined character (a box). The filter method explained above can find these characters if you know what character it is.

Fortunately life is much easier for converting data these days than it was even five years ago. Now I use file formats like DIF and SYLK whenever I can when converting between programs that support both formats. The transfer goes a lot less painfully when the format is well defined as the DIF format is. For those not familiar with DIF, it is called the “Data Interchange Format” and was originally designed to by Software Arts (are they still around?) to transfer data from Visicalc (the father of all spreadsheet programs). The file is completely ASCII but has header information added to help maintain data integrity. (This saved me a few times). This means that the file will undoubtedly be larger than without DIF formatting so be sure that you only use it for file transport rather than data storage especially if your disk free space is critical. SYLK is Microsoft’s format. Most Microsoft products and a few data base programs such as Omnis 3 and FileMaker Plus support SYLK format. The best way to figure out how these work is to analyze some sample data from a program that exports in one of these formats.

‘ Drawing Count Program
‘ Converts Drawing Log Data created by FileMaker Plus
‘ and computes total number of drawings under each date
‘ By Dave Kelly
‘ ©1988
‘MS BASIC

DIM Charge$(1000),Date1(1000),Date2(1000),Date3(1000), Date4(1000)
DIM tCharge$(20),tDate1(20),tDate2(20),tDate3(20),tDate4(20)
filename$=FILES$(1,”TEXT”)
IF filename$=”” THEN END
OPEN “I”,1,filename$
OPEN “O”,2,”Drawing Count.DATA”
PRINT
count=0
CALL MOVETO(10,30)
PRINT “Now Reading in Records...”
WHILE NOT EOF(1)
    count=count+1
    CALL MOVETO (10,50)
    PRINT count
    Charge$(count)=””
    i$=””
    A$=””
    C$=””
    S$=””
    INPUT#1,Charge$(count),i$,A$,C$,S$
    IF LEN(Charge$(count))>0 THEN
        IF RIGHT$(Charge$(count),1)=”)” THEN
            Charge$(count)=MID$(Charge$(count),LEN(Charge$(count))-4,4)
        ELSE
            Charge$(count)=RIGHT$(Charge$(count),4)
        END IF
    END IF
    IF LEN(i$)>0 THEN Date1(count)=1 ELSE Date1(count)=0
    IF LEN(A$)>0 THEN Date2(count)=1 ELSE Date2(count)=0
    IF LEN(C$)>0 THEN Date3(count)=1 ELSE Date3(count)=0
    IF LEN(S$)>0 THEN Date4(count)=1 ELSE Date4(count)=0
WEND
CALL MOVETO(10,70)
PRINT “Now Sorting Data...”
CALL Sort(count,Charge$(),Date1(),Date2(),Date3(),Date4())
k=0
FOR j=1 TO count
IF tCharge$(k)<>Charge$(j) THEN k=k+1
tCharge$(k)=Charge$(j)
tDate1(k)=tDate1(k)+Date1(j)
tDate2(k)=tDate2(k)+Date2(j)
tDate3(k)=tDate3(k)+Date3(j)
tDate4(k)=tDate4(k)+Date4(j)
NEXT j
CALL MOVETO(10,90)
PRINT “Now Writing to File...”
PRINT#2,”Charge#    Date1    Date2    Date3    Date4"
FOR i=1 TO k
tDate1(i)=tDate1(i)-tDate2(i)
tDate2(i)=tDate2(i)-tDate3(i)
tDate3(i)=tDate3(i)-tDate4(i)
PRINT #2,tCharge$(i),tDate1(i),tDate2(i),tDate3(i),tDate4(i)
PRINT tCharge$(i),tDate1(i),tDate2(i),tDate3(i),tDate4(i)
NEXT i
CLOSE #1
CLOSE #2
PRINT”Click to continue...”
WHILE MOUSE(0)<>1:WEND
END

SUB Sort(count,Charge$(),Date1(),Date2(),Date3(),Date4()) STATIC
    flips=1
    WHILE flips
        flips=0
        FOR i=2 TO count
            IF Charge$(i-1)> Charge$(i) THEN
                flips=1
                SWAP Charge$(i-1),Charge$(i)
                SWAP Date1(i-1),Date1(i)
                SWAP Date2(i-1),Date2(i)
                SWAP Date3(i-1),Date3(i)
                SWAP Date4(i-1),Date4(i)
            END IF
        NEXT
    WEND
END SUB

HYPER-CORNER

The new update disk for HyperCard version 1.1 contains a read me stack with three new buttons pertaining to importing and exporting data. If you don’t have the new update you can get it from your Apple dealer. Version 1.1 is supposed to fix some bugs that “bugged” some of us.

The read me stack gives directions for using the new buttons, but I’ll try to explain them a little bit here. To try them out, create a new stack with a few fields in it such as the one I created; see fig. 1.

Fig 1. Hyper Dialog

HyperCard Import/Export

The arrow keys were added from the Button Ideas stack to make it easy to check out the data, but you will need to remember the command 1,2,3,4 keys that move you from card to card or you may use the arrow (or option-arrow) keys to move from field to field.

Fig. 2 Export Dialog

The most useful of the buttons is the Export Data button. It allows you to select the background fields you wish to export and the delimiters separating the fields and records. Most database programs will read the tab delimited records (with carriage return between each record). NO, the export button will not export card fields, only background fields. That is understandable since the output needs to be consistent.

I found that the best way to see how the buttons work is to try them out. Clicking on the Export Data (or Export Text) button will produce this dialog which will let you select the background field you desire to output. (See figure 2)

Selecting the Fields for Export

After selecting the All button or after selecting which of the background fields you want to export, you specify the file name to export to. A dialog comes up to ask you for the name of the text file to export to:

Fig. 3 Editable Dialog

Selecting a Filename for Export

There is an XCMD around someplace for calling the Standard File Dialog which would be better to substitute for this dialog. The problem with XCMD routines for general use is that not everyone has them. It would be best to set up your own custom library of XCMDs to use in your own stacks.

I ran into no difficulty getting my data to export to a file. You can examine your data with a word processor to see how the text file looks when the data has been exported. I like using MS Word for examining this kind of file because you can view all the tabs and carriage returns using the Show ¶ menu item.

The Import Button works well too, except that you can’t import data into existing background fields. It creates the background fields on the fly. Perhaps someone out there could create a button script that will allow you to specify which field you would like to be the first, second and so on field to be read in. AT LEAST, now these buttons are included with HyperCard. At first, it may appear that the import didn’t work, but if you read the instructions in the read me stack, it explains that the new background fields are created one on top of another. To see the fields you will have to peel them apart. (see figure below)

Imported Fields

Ideally, the importing will be done first thing before the stack layout is designed if possible. Importing/Exporting of text with HyperCard has been one of the weak links. With all the interest in HyperCard these days, there should be more XCMD routines and tools we can use to improve the usefulness of HyperCard.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Whitethorn Games combines two completely...
If you have ever gone fishing then you know that it is a lesson in patience, sitting around waiting for a bite that may never come. Well, that's because you have been doing it wrong, since as Whitehorn Games now demonstrates in new release Skate... | Read more »
Call of Duty Warzone is a Waiting Simula...
It's always fun when a splashy multiplayer game comes to mobile because they are few and far between, so I was excited to see the notification about Call of Duty: Warzone Mobile (finally) launching last week and wanted to try it out. As someone who... | Read more »
Albion Online introduces some massive ne...
Sandbox Interactive has announced an upcoming update to its flagship MMORPG Albion Online, containing massive updates to its existing guild Vs guild systems. Someone clearly rewatched the Helms Deep battle in Lord of the Rings and spent the next... | Read more »
Chucklefish announces launch date of the...
Chucklefish, the indie London-based team we probably all know from developing Terraria or their stint publishing Stardew Valley, has revealed the mobile release date for roguelike deck-builder Wildfrost. Developed by Gaziter and Deadpan Games, the... | Read more »
Netmarble opens pre-registration for act...
It has been close to three years since Netmarble announced they would be adapting the smash series Solo Leveling into a video game, and at last, they have announced the opening of pre-orders for Solo Leveling: Arise. [Read more] | Read more »
PUBG Mobile celebrates sixth anniversary...
For the past six years, PUBG Mobile has been one of the most popular shooters you can play in the palm of your hand, and Krafton is celebrating this milestone and many years of ups by teaming up with hit music man JVKE to create a special song for... | Read more »
ASTRA: Knights of Veda refuse to pump th...
In perhaps the most recent example of being incredibly eager, ASTRA: Knights of Veda has dropped its second collaboration with South Korean boyband Seventeen, named so as it consists of exactly thirteen members and a video collaboration with Lee... | Read more »
Collect all your cats and caterpillars a...
If you are growing tired of trying to build a town with your phone by using it as a tiny, ineffectual shover then fear no longer, as Independent Arts Software has announced the upcoming release of Construction Simulator 4, from the critically... | Read more »
Backbone complete its lineup of 2nd Gene...
With all the ports of big AAA games that have been coming to mobile, it is becoming more convenient than ever to own a good controller, and to help with this Backbone has announced the completion of their 2nd generation product lineup with their... | Read more »
Zenless Zone Zero opens entries for its...
miHoYo, aka HoYoverse, has become such a big name in mobile gaming that it's hard to believe that arguably their flagship title, Genshin Impact, is only three and a half years old. Now, they continue the road to the next title in their world, with... | Read more »

Price Scanner via MacPrices.net

B&H has Apple’s 13-inch M2 MacBook Airs o...
B&H Photo has 13″ MacBook Airs with M2 CPUs and 256GB of storage in stock and on sale for up to $150 off Apple’s new MSRP, starting at only $849. Free 1-2 day delivery is available to most US... Read more
M2 Mac minis on sale for $100-$200 off MSRP,...
B&H Photo has Apple’s M2-powered Mac minis back in stock and on sale today for $100-$200 off MSRP. Free 1-2 day shipping is available for most US addresses: – Mac mini M2/256GB SSD: $499, save $... Read more
Mac Studios with M2 Max and M2 Ultra CPUs on...
B&H Photo has standard-configuration Mac Studios with Apple’s M2 Max & Ultra CPUs in stock today and on Easter sale for $200 off MSRP. Their prices are the lowest available for these models... Read more
Deal Alert! B&H Photo has Apple’s 14-inch...
B&H Photo has new Gray and Black 14″ M3, M3 Pro, and M3 Max MacBook Pros on sale for $200-$300 off MSRP, starting at only $1399. B&H offers free 1-2 day delivery to most US addresses: – 14″ 8... Read more
Department Of Justice Sets Sights On Apple In...
NEWS – The ball has finally dropped on the big Apple. The ball (metaphorically speaking) — an antitrust lawsuit filed in the U.S. on March 21 by the Department of Justice (DOJ) — came down following... Read more
New 13-inch M3 MacBook Air on sale for $999,...
Amazon has Apple’s new 13″ M3 MacBook Air on sale for $100 off MSRP for the first time, now just $999 shipped. Shipping is free: – 13″ MacBook Air (8GB RAM/256GB SSD/Space Gray): $999 $100 off MSRP... Read more
Amazon has Apple’s 9th-generation WiFi iPads...
Amazon has Apple’s 9th generation 10.2″ WiFi iPads on sale for $80-$100 off MSRP, starting only $249. Their prices are the lowest available for new iPads anywhere: – 10″ 64GB WiFi iPad (Space Gray or... Read more
Discounted 14-inch M3 MacBook Pros with 16GB...
Apple retailer Expercom has 14″ MacBook Pros with M3 CPUs and 16GB of standard memory discounted by up to $120 off Apple’s MSRP: – 14″ M3 MacBook Pro (16GB RAM/256GB SSD): $1691.06 $108 off MSRP – 14... Read more
Clearance 15-inch M2 MacBook Airs on sale for...
B&H Photo has Apple’s 15″ MacBook Airs with M2 CPUs (8GB RAM/256GB SSD) in stock today and on clearance sale for $999 in all four colors. Free 1-2 delivery is available to most US addresses.... Read more
Clearance 13-inch M1 MacBook Airs drop to onl...
B&H has Apple’s base 13″ M1 MacBook Air (Space Gray, Silver, & Gold) in stock and on clearance sale today for $300 off MSRP, only $699. Free 1-2 day shipping is available to most addresses in... Read more

Jobs Board

Senior Product Associate - *Apple* Pay (AME...
…is seeking a Senior Associate of Digital Product Management to support our Apple Pay product team. Labs drives innovation at American Express by originating, Read more
Medical Assistant - Surgical Oncology- *Apple...
Medical Assistant - Surgical Oncology- Apple Hill Location: WellSpan Medical Group, York, PA Schedule: Full Time Sign-On Bonus Eligible Remote/Hybrid Regular Apply Read more
Omnichannel Associate - *Apple* Blossom Mal...
Omnichannel Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
Cashier - *Apple* Blossom Mall - JCPenney (...
Cashier - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Blossom Mall Read more
Operations Associate - *Apple* Blossom Mall...
Operations Associate - Apple Blossom Mall Location:Winchester, VA, United States (https://jobs.jcp.com/jobs/location/191170/winchester-va-united-states) - Apple Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.