TweetFollow Us on Twitter

Oct 87 Letters
Volume Number:3
Issue Number:10
Column Tag:Letters

Letters

Segmented DA’s

Tom Saxton, formerly

University of Utah,

Mathematics Dept.

I have an idea for yet another article. I have been doing some consulting work with ALP Systems in SLC where we have managed to figure out how to write a segmented DA in LightSpeed C. There are several fairly subtle problems we have found and cured. Jon Nicponski and I are interested in writing up an article with a simple example program to illustrate the ideas. Are you interested? Finally, beginning next week I will be working for Microsoft as a “Program Design Engineer.” [Would love to see your ideas on the Segmented DA, and while your at it, perhaps in your new calling at Microsoft, you can pass on some of MacTutor’s complaints about the poor quality of Macintosh languages coming out of Microsoft. The MS Basic compiler has been a constant source of complaints in our letters department and the problems with Fortran are legend. These remain the only two Microsoft products after all this time, which in itself is an indication of how your new employer feels about the Mac. -Ed]

Colorizing Programs

Scott Berfield,

Jack of All Trades

Mindscape, Inc.

In a recent issue (September 1987) I read with interest that SuperPaint can be used for colorizing logos for use in other programs. This is a technique with which I am familiar, but I don’t use SuperPaint for it. I use GraphicWorks 1.1 (of course, I get paid to say that!) for the same thing. GraphicWorks allows you to set fore and background colors for every one of 64 objects in a panel. That panel can then be copied and pasted as a PICT that retains the color and transfer mode information. The one real advantage I can see to using GW 1.1 for this is that it runs in multi-bit mode, so you get to see and edit in color on the screen of the Mac II. Another interesting trick is to obtain a 256 color Pict from somewhere and paste it into GW 1.1 as a PICT -- it will retain its colors -- and then combine it with other elements to create your image. Then use that combined PICT to create your dialog. This works for color scans from a variety of sources, PixelPaint PICT images, and Image Studio grayscale images... it can give a program a dynamite look!

Note: Early versions of GraphicWorks 1.1 may have problems when run an a Mac II. If you run into such a problem, call Mindscape’s customer service number (in the program’s manual) and they will get you the newest version. This only affects Mac II users, so if you’re using an SE or +, you should be fine.

Finally, I notice that an awful lot of the letters and notes in your magazine are from people who are writing games for the Mac. I would like them to know that Mindscape is always interested in looking at creative work. If you have a program you think is puvlishable, please don’t hesitate to contact us!

Attaching Icons To Applications Created Using MS Basic Compiler

David K. Wyatt

Ithaca, NY

There are probably better ways of accomplishing this particular task than the method outlined here, but this method is relatively quick and simple. The only software tool required is Apple’s ResEdit (the latest version I have is 1.0.1), though an Icon Editor can also assist in doing some of the work. The first thing to do is to remember to work on a copy of your application, preferably on a floppy.

Open ResEdit, single-click on the name of your application, and choose Get Info from the File menu (or hit Ctrl-I). The first thing to do is to give the application a unique four-character Creator name-- BODE in my case. The second thing to do on this window is to turn the Inited box off and the Bundle box on. Then click on the go-away box and, after answering positively when asked if you want to save the Info on your file, you will be back to the list of files on your disk.

Next, double-click on the name of your application, and you will get a list of the current Resources installed in your application. This list is short, and in most cases will include only these: ACRL, ALRT, BASI, CODE, DITL, and STR. Hit Control-N (or select New from the Edit menu) and you will get the New Type Name: box. The way this particular element of ResEdit works is that you either choose an existing resource Type from the list on the left of the box, or type in a new resource type in the box in the upper right.

Here, you want first to make a resource for your own, special application, giving it the Creator name you gave above. When you click the OK box (or hit Enter), you will be given a blank window. To get something to fill in, hit Control-I, and you will get the window. The only thing you want to do in this window is to change ID: to 0.

When you have done so, click the go-away box and you will be back to the listing of resources installed in your program-- now including (in the example here) BODE.

Again, the next thing to do is to hit Control-N to create a new resource. This time, use the scroll arrows to find ICN#, select it, and hit OK. You will then get a blank window, with no icons or editing template in it. You can do one of two things here. Either Paste into this window an icon you have created using an icon editor, or hit Control-N (for New) and get the icon editor frame.

ResEdit will automatically assign a resource ID number to the icon you create here, and you should carefully note down its number such as 19328. When you have completed editing this icon, hit the go-away box and you will be returned to the ICN# window, with your new icon pictured there. Hit the go-away button again to return to the list of resources, which will now include ICN#.

There are two other resources that the Mac needs in order to tie together the program and its icon-- a FREF and a BNDL. (We are proceeding in the order in which we are, because each step requires an ID number generated in the previous step.)

First, hit Control-N (New) again to signal that you are creating another new resource, and this time scroll down and choose FREF and click OK. You will get a window called “FREFs from <program name>.” Hit Control-N again, and you will get the FREF editor.

You need to make sure that the File Type is APPL, and that the icon localID is 0. That’s all. If they are not so identified, change them. Note down the FREF ID number, which in the case illustrated is 1948. Then hit the go-away button to get back to FREFs window, and again to get back to the list of resources, in which you will now see the resources you have added so far-- BODE (your application Creator Type), ICN#, and FREF.

You are now ready to bundle them all together in a package-- view this next step as providing the machine with a way to know what goes with what. You need to create a BNDL resource.

Again, hit Control-N and get the “New Type Name:” box, select BNDL, and click OK. You will see a window titled “BNDLs from <program name>.” Hit Control-N, and you will get the BNDL Editor window.

At first you will only have the first part of this window, down to the first row of asterisks. Insert the OwnerName (BODE in our example) and make the owner ID 0. Then double-click on the row of asterisks and you will get the next section of the window (you will have to use the scroll bars to see it all). Enter the information for the ICN# and FREF resources. Extend the portions between rows of hyphens by double clicking on the hyphens, and get another row of asterisks by double-clicking on the asterisks. Be sure to use 0 for localID in both cases. (I do not know why in both cases below there are blank sections.)

There is one final bit of business left. Two of the resources in your application, as compiled by BASIC Compiler, are generic-- the same for every application unless otherwise changed. They have to do with what is shown when you click on the “About...” in the Apple menu.

Double-click first on the ALRT resource, and you will be shown that two ALRT resource exist, with ID numbers 265 and 266. Double-click on ALRT ID#266 and you will be shown the alert box showing “Created by BASCOM.” This is a rather bland message to give those who will use your application-- and it’s also, if you come to think about it, insulting to you! You probably want to tell the users who really “created” your application.

Click on the “Created by BASCOM.” You will find you can move the text around, and change the size and shape of the box. The same is true of the OK button. Double-click it to edit the text within, and you will get yet another editing window. The highlighted text can be edited in the usual fashion, and you can make it extend for several lines. Click on the go-away box to return back to the previous level, and re-shape the text box and adjust its placement. Click go-away boxes to return to the resource list.

Finally, you need to change the message that is displayed on the Apple menu. Double-click on STR (there is a single space following the R, which is a part of the name of that resource) and you will get the list of STRs in your application, Double-click on STR ID=256. You can simply edit “theStr” to say whatever you will.

When you are back to the desktop, hold down the Option and Command keys while re-inserting your disk into the machine. When asked if you want to rebuild the desktop, answer affirmatively. You are doing this in order to force Finder to take note of the fact that you have given your application a new icon. When the Finder has done its job and you open the disk, you will find your icon displayed on the desktop. [This is another area where Microsoft should have provided the means of linking with a resource file so that application icon information could be accomplished in the normal manner. -Ed]

LaserWriters Self-Destruct after One or Two Years!

David E. Smith

MacTutor

A failure mode for the LaserWriter printer has been observed. After a year or more of use, the fuser roller under the green felt cover begins to disintigrate. This is caused by the rubbing of the rubber paper guides on the roller, leaving circular groves in the delicate silver finish of the fuser roller. The result of these groves, which line up perfectly with the rubber paper guides on the green felt roller covering, prevent toner on the paper from being fused properly to the paper as the paper passes over these roller imperfections. The groves also mar the paper surface, leaving a line on the paper. The failure mode seems to be the breakdown of the silver covering of the fuser roller, leaving it brittle and susceptible to the scratching of the surface by the paper guides. We know of two LaserWriters in this area which have this problem and suspect there may be others. If you know of a LaserWriter with this problem, please contact MacTutor. We do not as yet know what plans, if any, Apple has to fix this problem. Since it is mechanical, the fix will not be easy and probably will require returning the printer to Apple. We suggest all LaserWriter owners get Apple Care immediately before this problem manifests itself as the fix could be quite costly. More next month after we find out what the Apple service organization proposes to solve this problem.

A another failure mode that is not easily repaired is changes made to the EEPROM inside the LaserWriter. The printer apparently contains important start-up information in EEPROM inside the machine. It is possible to change this information by careless or deliberate postscript programming. If this is done, the postscript board must be completely replaced at a cost of $800, since the EEPROM is not replaceable. Apple, in their infinite wisdom, has designed a machine that through programming, can be destroyed and there is no way to re-program the EEPROM to re-set it’s parameters! Therefore, you should be very careful not to allow any “foreign” postscript code to be sent to your LaserWriter. Imagine the howl if you could program your tv set to self-destruct without any way of re-setting it! However, a service technician told me that he thinks there is a secret method by which the EEPROM can either be re-programmed or erased so the LaserWriter can be made operative, since he claims an Apple Service Class instructor did just that, but apparently the secret has never been revealed. The reason Apple is so jealous of this bit of know-how is that the EEPROM contains the copy count and when it’s reset, the count goes back to zero. Still, it is inexcusable that a machine that costs $5,000 could be made useless by careless programming. Hasen’t anybody on the LaserWriter design team ever heard of a reset button?

IAZNotify Defeated

Steve Halls

Edmonton, Alberta

Why do the Apple programs “ResEdit” and “MPW Shell” purposely defeat the “IAZNotify” mechanism (see tech note #64A) by clearing this ointer just before exit. For those of us who attempt to write memory resident tasks, this behaviour causes real problems. Generally speaking, a memory resident task may need a hook at the beginning of an application to open files and drivers, and a hook at the end of anpplication to close file/drivers and unpatch traps. If an IAZNotify proc that restores traps is by-passed, those patched traps will bomb in the next application. We need a consistent mechanism, and if Apple must subvert this one, cany they suggest another? Enough said?

Is it true the MPW assembler creates incorrect machine code in some circumstances? [I am not aware of such a defect, however, it may be true. -Ed]

Is APDA selling an updated version of MacinTalk that works on the Mac II? Does this mean Apple is supporting MacinTalk? [Yes and no. APDA has started shipping a Mac II version of MacinTalk, but no, Apple still refuses to acknowledge it’s existance. -Ed]

Absoft Fortran Compiler Update

David E. Smith

We have gotten several complaints from readers concerned about the Absoft 68020 Fortran compiler which they have been advertising in MacTutor. Apparently Absoft has not yet started shipping this product and a number of MacTutor readers who sent Absoft money are hopping mad about this. One reader has threatened a postal lawsuit over the issue. We suggest you contact Absoft directly to inquire on the status of the 68020 version of their Fortran product before you send any money. You might also want to be aware that a new MPW Fortran is currently going into beta test by another company, and that this product looks very hot! We hope to have more information on it in the next issue of MacTutor. The targeted release date for this new Fortran compiler, which is said to be linkable to any MPW code, is the January MacWorld Expo.

68020 News from Motorola

One of our readers has kindly sent us a copy of the Motorola RoadRunner newsletter which contains some interesting tidbits on the future of the 68020 product line. "Estimates are that our 68020 has upwards of 70% of the worldwide installed base of 32-bit MPU's and 78% in engineering workstations. Our target for 68020 shipments this year is 700,000, meaning that this device will reside in close to one million systems by year-end."

The article also credits the Macintosh II by saying that momentum is building for the 32-bit MPU as the result of the maturing of many successful customer programs, "a number of which are in the lower end of the price spectrum, such as Apple's highly acclaimed Mac II." Hmmm, lower end of the price spectrum, eh? I'll try to keep that in mind the next time I send in my $7,000 check for another Mac II and that's at developer prices!

A few words on the progress of the 68030 were also included. First silicon on the 68030 was reached in April and initial deliveries are on schedule for the fourth quarter of this year. The 68030 provides "significantly higher performance" than the 68020 at the same clock speed, while maintaining 100% software compatibility. The 68882 enhanced floating point processor is said to be on schedule for September samples.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Latest Forum Discussions

See All

Top Mobile Game Discounts
Every day, we pick out a curated list of the best mobile discounts on the App Store and post them here. This list won't be comprehensive, but it every game on it is recommended. Feel free to check out the coverage we did on them in the links... | Read more »
Price of Glory unleashes its 1.4 Alpha u...
As much as we all probably dislike Maths as a subject, we do have to hand it to geometry for giving us the good old Hexgrid, home of some of the best strategy games. One such example, Price of Glory, has dropped its 1.4 Alpha update, stocked full... | Read more »
The SLC 2025 kicks off this month to cro...
Ever since the Solo Leveling: Arise Championship 2025 was announced, I have been looking forward to it. The promotional clip they released a month or two back showed crowds going absolutely nuts for the previous competitions, so imagine the... | Read more »
Dive into some early Magicpunk fun as Cr...
Excellent news for fans of steampunk and magic; the Precursor Test for Magicpunk MMORPG Crystal of Atlan opens today. This rather fancy way of saying beta test will remain open until March 5th and is available for PC - boo - and Android devices -... | Read more »
Prepare to get your mind melted as Evang...
If you are a fan of sci-fi shooters and incredibly weird, mind-bending anime series, then you are in for a treat, as Goddess of Victory: Nikke is gearing up for its second collaboration with Evangelion. We were also treated to an upcoming... | Read more »
Square Enix gives with one hand and slap...
We have something of a mixed bag coming over from Square Enix HQ today. Two of their mobile games are revelling in life with new events keeping them alive, whilst another has been thrown onto the ever-growing discard pile Square is building. I... | Read more »
Let the world burn as you have some fest...
It is time to leave the world burning once again as you take a much-needed break from that whole “hero” lark and enjoy some celebrations in Genshin Impact. Version 5.4, Moonlight Amidst Dreams, will see you in Inazuma to attend the Mikawa Flower... | Read more »
Full Moon Over the Abyssal Sea lands on...
Aether Gazer has announced its latest major update, and it is one of the loveliest event names I have ever heard. Full Moon Over the Abyssal Sea is an amazing name, and it comes loaded with two side stories, a new S-grade Modifier, and some fancy... | Read more »
Open your own eatery for all the forest...
Very important question; when you read the title Zoo Restaurant, do you also immediately think of running a restaurant in which you cook Zoo animals as the course? I will just assume yes. Anyway, come June 23rd we will all be able to start up our... | Read more »
Crystal of Atlan opens registration for...
Nuverse was prominently featured in the last month for all the wrong reasons with the USA TikTok debacle, but now it is putting all that behind it and preparing for the Crystal of Atlan beta test. Taking place between February 18th and March 5th,... | Read more »

Price Scanner via MacPrices.net

AT&T is offering a 65% discount on the ne...
AT&T is offering the new iPhone 16e for up to 65% off their monthly finance fee with 36-months of service. No trade-in is required. Discount is applied via monthly bill credits over the 36 month... Read more
Use this code to get a free iPhone 13 at Visi...
For a limited time, use code SWEETDEAL to get a free 128GB iPhone 13 Visible, Verizon’s low-cost wireless cell service, Visible. Deal is valid when you purchase the Visible+ annual plan. Free... Read more
M4 Mac minis on sale for $50-$80 off MSRP at...
B&H Photo has M4 Mac minis in stock and on sale right now for $50 to $80 off Apple’s MSRP, each including free 1-2 day shipping to most US addresses: – M4 Mac mini (16GB/256GB): $549, $50 off... Read more
Buy an iPhone 16 at Boost Mobile and get one...
Boost Mobile, an MVNO using AT&T and T-Mobile’s networks, is offering one year of free Unlimited service with the purchase of any iPhone 16. Purchase the iPhone at standard MSRP, and then choose... Read more
Get an iPhone 15 for only $299 at Boost Mobil...
Boost Mobile, an MVNO using AT&T and T-Mobile’s networks, is offering the 128GB iPhone 15 for $299.99 including service with their Unlimited Premium plan (50GB of premium data, $60/month), or $20... Read more
Unreal Mobile is offering $100 off any new iP...
Unreal Mobile, an MVNO using AT&T and T-Mobile’s networks, is offering a $100 discount on any new iPhone with service. This includes new iPhone 16 models as well as iPhone 15, 14, 13, and SE... Read more
Apple drops prices on clearance iPhone 14 mod...
With today’s introduction of the new iPhone 16e, Apple has discontinued the iPhone 14, 14 Pro, and SE. In response, Apple has dropped prices on unlocked, Certified Refurbished, iPhone 14 models to a... Read more
B&H has 16-inch M4 Max MacBook Pros on sa...
B&H Photo is offering a $360-$410 discount on new 16-inch MacBook Pros with M4 Max CPUs right now. B&H offers free 1-2 day shipping to most US addresses: – 16″ M4 Max MacBook Pro (36GB/1TB/... Read more
Amazon is offering a $100 discount on the M4...
Amazon has the M4 Pro Mac mini discounted $100 off MSRP right now. Shipping is free. Their price is the lowest currently available for this popular mini: – Mac mini M4 Pro (24GB/512GB): $1299, $100... Read more
B&H continues to offer $150-$220 discount...
B&H Photo has 14-inch M4 MacBook Pros on sale for $150-$220 off MSRP. B&H offers free 1-2 day shipping to most US addresses: – 14″ M4 MacBook Pro (16GB/512GB): $1449, $150 off MSRP – 14″ M4... Read more

Jobs Board

All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.