TweetFollow Us on Twitter

Jan 87 Mousehole
Volume Number:3
Issue Number:1
Column Tag:Mousehole Report

Mousehole Report

By Rusty Hodge, Contributing Editor, Mousehole BBS

Great Disk Timer Shoot-out!

We've been having a bit of a challenge here lately. Which hard drive is the fastest? Which is the best? What are our conclusions? You won't want to know, maybe. The fastest drives were the HD-20SC, The Dataframe XP and the ProAPP 20 and 40S, not in that order. Drives with the fastest read/write time didn't necessarily have the fastest access time. Internal RAM caching (e.g. the ProAPP) helped some tremendously. And our results didn't take boot speed into account. Dataframes seem to take forever to boot, HD-20s (the non-SCSI ones) seemed to be much faster.

We're dropping speculation about the "January" Mac (Alladin some call it) because it will probably be announced by the time you read this. [Ha ha ha! Where have I heard that one before? -Ed] The Milwaukee is a different story, pre-release developer machines are starting to pop out of the woodwork as we speak; which means that everyone who has them is under piles of non-disclosure statements. So we can't tell you that it has multiple slots, an eighty megabyte internal hard disk, slots, floating point co-processor standard, slots, multiple video options (big mono, bigger mono and big color), 2mb of memory-managed RAM initially (eventually expandable to a gigabyte), slots, 14-16mHz processor speed, and of course, slots. We'll see. [Who needs slots? -Ed]

Can't find a SASE to send to us? For the month of January we are offering a trial online sign-up. Here's how it goes. Call (714) 921-2252. When you get the Login promp, type MACTUTOR GUEST. This will prompt you for a stream on information and then you will have your very own MouseHole acount. Sound exciting? Think of it as a sort of a late Christmas present!

Finally, we hope to see you all at the San Fransisco MacExpo. Look for us and we'll look for you. - Rusty

68030

Frank Henriquez

With all this hype in the press lately over the 80386, most (if not all) have overlooked the simple fact that a 68020 will be faster than the 80386...the 68020 has an internal cache. The 80386 does not. Unless the 80386 has a lot of fast static ram to play with, it's going to have to insert a wait state or two (just like most 68020 systems) BUT, with the cache bit enabled, the 68020 will not have to access external memory as often, and will therefore run at full speed. I've seen benchmarks where the 68020 @ 16 MHZ is 20-30% faster than the 16MHZ 80386.

The 68030 is another story; apparently Motorola has included some fancy memory interleaving hardware AND separate data and instruction caches. I've heard that a properly designed '030 system could run with only occasional wait-states, at 25MHZ+, using standard DRAMs. Now, that is quite a feat. And since the '030 is basically a 68020 deep down inside, it should be fully compatible with the 68000, 68020 etc.

80386

James B. Du Waldt

I was under the impression that the '386 did have an instruction cache, like the '020, but maybe I'm wrong... One of the real problems with the new, very fast processors is, as Frank mentions, RAM speed. We're going to see a lot of high speed, low end stuff having to use static row and/or nibble addressing in order to keep up with the 16 MHz '386, not to mention the 20 and 25 Mhz '020's...

A brief note on workstation sales... Sun 20,000 units/yr (all figures approx.); Apollo 20,000 units/yr; DEC 12,000 units/yr; IBM 6,000 units/yr.

Industry editors/writers are beginning to think that the RT (apparently gives a new meaning to "Reduced" instruction set computers...) just ain't gonna make it, several months after saying how slowly windows close on IBM... (I agreed with them, still do, but I was HOPING it would...)

Some of the companies that announced early support of the RT are now dropping their porting plans. I guess selling to people (ie, engineers) who aren't afraid of technology isn't quite as easy as selling to MIS folks... After a year, complaints are still the same, bad graphics & no networking.

Resources

Mike Steiner

Why has so much attention been given to how to write a resource and then compile it with RMaker? Why not just write your code and your unique resources and then use Resedit to write your window, menu, dialog, etc. resources? (or write the resources first and then the program). I'd think that putting resources together with Resedit would be easier than having to write the code from scratch without the visual interface that Resedit affords. Maybe this might make an interesting 'Tutor article for someone to write. [The problem is, how do you publish a resource file made with ResEdit? You can't. So a lot of the usefulness is lost if you can't convey the idea to someone. In this respect, MPW has it all over MDS because MPW has a resource compiler and de-compiler that are compatible and opposite in function. -Ed.]

ResEdit vs. RMaker

Jim Reekes

I agree with you Mike. I've never used RMaker, because most the the resources are graphic items and RMaker is a text-based tool. I have forever, and will always use ResEdit to create my resources. I've made just about every type of resource totally using ResEdit before writing ANY code. I have a library of generic resource items that I start with. Then with little modification I customize them for my new program. Then after all my resources are completed, which also allows me to play with the user interface, I'll start writing code LAST. I find this method greatly helps me to build programs quickly and easily.

I think the RMaker utility is just a cheap way to publish a resource in print. Until magazines start getting published on disk, how else can someone document a resource? I'd like to write or help someone write an article on using ResEdit instead of RMaker.

New HFS?!?!

Micro Man

From what I understand, Apple is rewriting HFS for the new slotted Mac due out first quarter. Last prototype unit that landed in this area came with 2000+ pages of appendums to the documentation of why your code doesn't work now. When our "guru" friend asked Apple about compatibility, all they would say is, "well it started out compatible" Has anyone else had similar dealings yet? I personally am not really in the mood to start over again come February re-writing code to fit the "NEW STANDARD". [Amen. -Ed]

Also, Apple's Sales Reps are starting to get a little loose tongued lately. Look for one Mac in January, another in May. Last I heard, Apple is suggesting dealers clear LOTS of floor space for Apple products starting in the April - May time frame. Look to see MUCHO monitors in all shapes, sizes, and colors.

Tops vs Macserve

MacoWaco

In Nov's Mactutor I'm quoted from the MH regarding Macserve. An editors' comment endorsed Tops within my quote. I would like to rebutt the editors' comment along with a bunch of other pro Tops comments. I've learned from northern sources that Centram's Tops does not use Apple's File structure, while Macserve does. While this might not seem to matter all that much to the operator at this time... it will later. [If someone out there can give us the precise technical scoop on exactly how Tops and MacServe work, we would love to publish it and clear up the confusion between these two products. -Ed]

Word 3.0

Rick Boarman

I talked to Microsoft today and they said Word 3.0 will be released sometime in Jan. The cost for people who bought 1.05 before 10-1-86 will be $99.00, $50.00 for people after 10-1. Sounds pretty steep to me. Is it worth it?

Tim Celeski

At $50-99 for an upgrade, Word 3.0 is an absolute steal. It's hard not to be so enthusiastic, since I've been working in it for 3 months. I suggest as Microsoft starts making the User group circuit that people attend a demonstration. Dealers will not have a demo until the product is released in January. It's great!

Mac Fortran Interface

Blacksmith

More information on McFace for you Fortran programmers: "McFace is a Fortran-callable unlinked external subroutine which creates a Macintosh user interface for existing Fortran programs. McFace adds access to desk accessories, file handling, text editors, picture editing, alerts, and dialogs without a single call to the toolbox by the main Fortran program..." The author can be reached by phone at (217) 328-5842. [Watch for an article on this product in MacTutor.-Ed]

Interesting experiment

Mike Steiner

Try the following: Take an HFS disk that has some files in the disk window. Check the memory available on the disk. Create a new folder and put some files into it. Now look at how much memory is available. Now try to get the lost memory back. You can take the files out of the folder, trash the folder, rebuild the desktop, etc. to no avail. The only way I have found to do it is to copy the disk to another disk. It seems that a folder takes up disk space that cannot be recovered. I'm using system 3.2 and Finder 5.3 for this.

Excel upgrade

Macowaco

I LOVE the hint in the letter I got for the EXCEL upgrade. Version 1.03 will take advantage of the 68881 coprocessor.

Remove Macsbug, why?

Jim Reekes

[In response to "How can you detect Macsbug is loaded in your Mac"]

Let me guess what you're trying to do. Remove Macsbug to keep someone from unprotecting your program. Without getting on a soapbox and pleading "no copy protection please", I'll explain why removing Macsbug would be a bad idea.

Macsbug gets installed during system load time below the Main Screen Buffer ($7A700). Then the sound buffers, jump tables, application parameters, application globals, quickdraw globals, and finally the CurStackBase get installed below this. All of these addresses will change depending on the version of Macsbug in use. All of this will happen before any of your code is excecuted. You could not remove Macsbug and reload all of these addresses. Therefore, you would have erase a section of high memory and leave the area blank.

BASIC 3.0 Features

Gary Voth

According to Microsoft, the MS BASIC 3.0 Interpreter has the following enhancements:

• Toolbox Support. In the new version, you'll be able to directly use resources, add command-key equivalents to menus, and make toolbox calls, etc. Microsoft basically purchased the marketing rights to the Clear Lake Research toolbox assembly language libraries and grafted them in to the interpreter, calling them the "Microsoft Basic Toolbox Library". At least, you can do as much as you could under MS Basic with the CLR libraries. So, at best, this will be a superficial interface Toolbox. No low level File Manager calls here!

• Runtime Package. Microsoft has finally understood that waves of commercial Macintosh developers are NOT rushing out to license their MS BASIC runtime package at almost $300 per year, so they are now going to include it with the interpreter. Last I heard, though, the runtime was a separate file, and could not be "bundled" with a BASIC application to produce a single, double-clickable program. [Not true. You can link the runtime library into a stand-alone program without paying fees. -Ed]

• HFS Compatibility. Yes, there are new enhancements to the FILE$ functions that return directory information to your program. There is also a way of changing the "default" directory on the fly.

• Multi-line IF...THEN..ELSE Constructs. New to this level are block IF/THEN/ELSE statements that permit a more structured coding style.

• A Miscellany of Other Stuff. Like SADD, for String Address function, which allows you to pass the address of a string variable to a machine language subroutine.

That's all I know at this time. No word on price or availability. I was told that the compiler is "under development," which I know is a stunning surprise to all of you. [Microsoft has begun a direct mail marketing program selling Basic for $99 if you order direct by Jan 15th. Call (206) 882-8088 for more info. -Ed]

Dave Kelly

Yes, I too have recieved my update notice. $25 to upgrade, but this gives you 140 CLR Libraries routines and multiline IF-THEN ELSE ENDIF type statement. Better support for LaserWriter. Fixed HFS problems and added CHDIR to change the directory. The compiler apparently has not been finished quite yet even though I think they wanted to have both done at the same time. It will probably (my guess only) be a new product which you'll have to pay extra for.

As the ad in MacWorld says, the compiler will support all the new 3.0 stuff. By the way, about a month ago someone from Microsoft called me and asked me what I thought they should do to improve MS Basic. I think they took some of my ideas, but not all. They had been reading the "BASIC WARS" Mactutor column where I reviewed ZBasic and others. I think they were finally seeing that they had to act fast to just keep up and work even harder if they wanted to keep any advantages over ZBasic. ZBasic is a much better product now. Version 3.02 is out and most bugs are gone. I'm almost ready to recommend it to everyone, but they are re-writting their editor and I'll wait till it comes out. By then maybe MS will have their compiler out too.

Hard Disk Survey

Bugs

Here are my times for DiskTimer 1.1 and my 10MB HyperDrive. I have the OLD 128K motherboard and the OLD Hyper controller board (rev 1.0). I am, however, running HFS with the new 128K ROMs and General's V3R1 software:100 32K reads, 133.0; 100 32K writes, 114.5; 80 seeks across 1MB, 6.7

Hobbit

My Hyperdrive 20 running on approximately a 512E (it has been upgraded so many times I don't know what it is!) gives the following times: 100 Reads 26.5 sec, 100 Writes 25.0 sec, Access time 2.8 sec.

Ok, so now I've got version II. Here are the results with my 512E and Hyper 20 running V3R1 (the latest & ......):

Test w/o caching w/ caching

100 24k reads 188 ds 184 ds

100 24k writes 187 ds 187 ds

80 seeks across 1MB 30 0

ProAPP 40

The Anarchist

I just got my new ProAPP 40mb hard disk. This drive is REALLY nice. It uses a 3.5" 2 platter disk mech, with built in SCSI controller. The typical read/seek time is 28-29ms. I have used a lot of SCSI drives but this is DEFINITLEY my favorite now! I have about 27 out of 40 megs full, and have had NO noticible speed decrease, either reading or writing.

If you are looking for a new disk, this is the one. The 40meg version retails for $1995, and the 20meg version for $995. These prices INCLUDE all applicable sales tax and shipping charges! [Note: There is developer pricing for real developers, according to ProAPP]

ProAPP 40s: 21.7 read; 21.2 write; 3.1 across 1mb.

Jim Reekes

Here's my results of bench marking the ProAPP 40. The drive had nearly 35mb of data. I've tested a freashly formatted 40 with less than 1mb, but the results were the same.

DiskTimer test: READ = 21.4; WRITE = 21.2; ACCESS TIME = 2.2.

Jcom

Timing results from Disk Timer II For HD-20: 874, 294, 37. For ST-225N (as used by Loy Spurlock): 194, 294, 37.

Dataframe 40XP

Tj

I just ran Disk Timer on Scott Winders' 40Mg XP and it screams!!!!. Here are the results:

Reads 6.9, Write 7.6, Access 1.8.

Scott Winders

Just got my Dataframe 40xp today and was blown away the Disktimer 2 results:

Reads 53, Write 55, Seeks 18. That is the fastest drive I have seen yet!!!

Disk Timer II

Dave Morris

Results from DataFrame20 (original) w/Mac+: Reads 146, Writes 146, Seeks 68

Note: This is with INIT 1.5 software. INIT 2.1 would blow up on me after loading the disk with System/Finder.

Micah AT20

The Psuedohacker

Here's the averaged results of three tests on my Micah AT20, (a drive whose company is having financial problems).

Reads: 55 Writes: 59 Seeks: 72

Personally, I like the drive. It's the company that's got me worried.

Relax Technology

Ross Yahnke

I'm the proud owner of a Relax Technology Hard 20 Plus disk drive. I guess it's got a Seagate drive in it. I'm real happy with it 'cept it has a noisy fan. Anyway, my disktimer II results are:

100 24KB reads: 194

100 24KB writes: 293

80 seeks: 37

The disk cache was off when I ran this.

Noisy Fans

The Anarchist

That is probably the hard disk, not your fan that is noisy. I had an SCSI drive that had the ST-225N in it, and it made more noise than the boxer fan...

DiskTimer

Max

More results for the Great Disk Timer Shootout:

For an EasyDrive 30-meg SCSI drive (based on a Seagate drive):

100 24KB Reads: 422

100 24KB Writes: 425

Access Time: 36

For what it's worth, I've had personal experience with 5 (yup: 5 different ones) of these drives, and I've found them to be tireless: 3 of them are on all day long... and have been for about 4 months. They're cheap. They don't break. The manufacturer is in the City of Orange [CA, Home of MouseHole!). They have a 1 year warranty.

GhostWindow?

The Corsair

What I want to do is a tool window almost exactly like the one in Fullpaint that will stay in front of all the other windows no matter what. I would like to pass events to it using DialogSelect like all my other dialogs

Here is a quote from inside mac - "In the global variable GhostWindow, you can store a pointer to a window that's not to be considered frontmost even if it is (for example, if you want to have a special editing window always present and floating above all the others).

This is what I want, So I do a GhostWindow = (WindowPtr)GetNewDialog(...

and what I get is a window that is just the opposite from what inside mac says...

The reason I want this is because normally everytime this window gets covered I have to do a BringToFront and that looks lame...

GhostWindow

Chief Wizard

The function of GhostWindow is not to keep a window in front of all other windows, but rather to pretend it isn't when it really is.

What I mean is, if you have a window and you store its pointer in GhostWindow, any calls to FrontWindow will not return your ghost window even if it really is in front. This way, you can have it highlighted at the same time as another window and have the next-to-front window be the "Active" one that gets all the normal events because it gets returned as the result of FrontWindow.

Unfortunately, you have to handle the GhostWindow completely manually. Because the window will get unhighlighted and moved to back if you activate another window, you have to constantly bring yours to the front. But that causes all sorts of flicker and other problems because of some of the things the ROM is doing.

We use a GhostWindow palette in dBASE Mac, and we wound up writing our own versions of some of the Window Manager routines to avoid having our palette flicker all the time.

DLOG defaults

Mark Chally

I'm having a hard time figuring out how to highlight the default button in a dialog. According to a couple things I read, it seems it's supposed to be "automatic" if you have a button that's item number one. However, it didn't seem to work for me. Anyone have the solution?

Sam

The default is automatic if you use _ModalDialog. It will return a 1 in itemHit if the return or Enter key is hit. If you don't use ModalDialog you're supposed to support the return/enter = OK anyway (Macintosh user interface guidelines -- hee hee)

To automatically draw a box around the item, it's not automatic... you have to do the drawing.

Do a GetDItem(OK button) and use the rect it returns in "theBox":

 PenSize(3,3); 
 InsetRect(theBox,-4,-4); 
 FrameRoundRect(theBox,16,16); 

'Automatic' Highlight

Chief Wizard

The automatic highlight does actually exist. Only it's for Alert calls, not dialogs.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Viber 11.9.1 - Send messages and make fr...
Viber lets you send free messages and make free calls to other Viber users, on any device and network, in any country! Viber syncs your contacts, messages and call history with your mobile device, so... Read more
Vallum 3.3.2 - $15.00
Vallum is a little tool that helps you monitor and block apps connections and throttle apps bandwidth. It is able to intercept connections at the application layer, and hold them while you decide... Read more
Microsoft OneNote 16.31 - Free digital n...
OneNote is your very own digital notebook. With OneNote, you can capture that flash of genius, that moment of inspiration, or that list of errands that's too important to forget. Whether you're at... Read more
Apple Pages 8.2.1 - Apple's word pr...
Apple Pages is a powerful word processor that gives you everything you need to create documents that look beautiful. And read beautifully. It lets you work seamlessly between Mac and iOS devices, and... Read more
Numbers 6.2.1 - Apple's spreadsheet...
With Apple Numbers, sophisticated spreadsheets are just the start. The whole sheet is your canvas. Just add dramatic interactive charts, tables, and images that paint a revealing picture of your data... Read more
f.lux 39.9873 - Adjusts the color of you...
f.lux makes the color of your computer's display adapt to the time of day, warm at night and like sunlight during the day. Ever notice how people texting at night have that eerie blue glow? Or wake... Read more
Deeper 2.5.0 - Enable hidden features in...
Deeper is a personalization utility for macOS which allows you to enable and disable the hidden functions of the Finder, Dock, QuickTime, Safari, iTunes, login window, Spotlight, and many of Apple's... Read more
NTFS 15.5.71 - Provides full read and wr...
NTFS breaks down the barriers between Windows and macOS. Paragon NTFS effectively solves the communication problems between the Mac system and NTFS. Write, edit, copy, move, delete files on NTFS... Read more
MTR 5.3.0.0 - The Mac's oldest and...
MTR (was MacTheRipper)--the Mac's oldest and smartest DVD-backup app. MTR - the complete toolbox, not a one-trick, point-and-click extractor. MTR is intended for making fair-use, backup copies of... Read more
Keynote 9.2.1 - Apple's presentatio...
Easily create gorgeous presentations with the all-new Keynote, featuring powerful yet easy-to-use tools and dazzling effects that will make you a very hard act to follow. The Theme Chooser lets you... Read more

Latest Forum Discussions

See All

Black Desert Mobile gets an official rel...
Pearl Abyss has just announced that its highly-anticipated MMO, Black Desert Mobile, will launch globally for iOS and Android on December 11th. [Read more] | Read more »
Another Eden receives new a episode, cha...
Another Eden, WFS' popular RPG, has received another update that brings new story content to the game alongside a few new heroes to discover. [Read more] | Read more »
Overdox guide - Tips and tricks for begi...
Overdox is a clever battle royale that changes things up by adding MOBA mechanics and melee combat to the mix. This new hybrid game can be quite a bit to take in at first, so we’ve put together a list of tips to help you get a leg up on the... | Read more »
Roterra Extreme - Great Escape is a pers...
Roterra Extreme – Great Escape has been described by developers Dig-It Games as a mini-sequel to their acclaimed title Roterra: Flip the Fairytale. It continues that game's tradition of messing with which way is up, tasking you with solving... | Read more »
Hearthstone: Battlegrounds open beta lau...
Remember earlier this year when auto battlers were the latest hotness? We had Auto Chess, DOTA Underlords, Chess Rush, and more all gunning for our attention. They all had their own reasons to play, but, at least from where I'm standing, most... | Read more »
The House of Da Vinci 2 gets a new gamep...
The House of Da Vinci launched all the way back in 2017. Now, developer Blue Brain Games is gearing up to deliver a second dose of The Room-inspired puzzling. Some fresh details have now emerged, alongside the game's first official trailer. [Read... | Read more »
Shoot 'em up action awaits in Battl...
BattleBrew Productions has just introduced another entry into its award winning, barrelpunk inspired, BattleSky Brigade series. Whilst its previous title BattleSky Brigade TapTap provided fans with idle town building gameplay, this time the... | Read more »
Arcade classic R-Type Dimensions EX blas...
If you're a long time fan of shmups and have been looking for something to play lately, Tozai Games may have just released an ideal game for you on iOS. R-Type Dimensions EX brings the first R-Type and its sequel to iOS devices. [Read more] | Read more »
Intense VR first-person shooter Colonicl...
Our latest VR obsession is Colonicle, an intense VR FPS, recently released on Oculus and Google Play, courtesy of From Fake Eyes and Goboogie Games. It's a pulse-pounding multiplayer shooter which should appeal to genre fanatics and newcomers alike... | Read more »
PUBG Mobile's incoming update bring...
PUGB Mobile's newest Royale Pass season they're calling Fury of the Wasteland arrives tomorrow and with it comes a fair chunk of new content to the game. We'll be seeing a new map, weapon and even a companion system. [Read more] | Read more »

Price Scanner via MacPrices.net

New 2019 16″ MacBook Pros on sale for $100 of...
Apple Authorized Reseller Adorama has new 2019 16″ MacBook Pros on sale today for $100 off Apple’s MSRP, each including free shipping. In addition, Adorama charges sales tax for NY & NJ residents... Read more
Apple Watch Series 3 GPS models on sale for l...
Amazon has Apple Watch Series 3 GPS models on sale starting at only $179. There prices are the lowest we’ve ever seen for these models from any Apple reseller. Choose Amazon as the seller rather than... Read more
iOS Bug In Facebook News Feed Lets Device Ca...
NEWS: 11.15.19- Users of the Facebook social media platform’s mobile app running on iOS devices won’t, like, this piece of news one bit in where a bug in the News Feed gave access to the camera... Read more
16″ MacBook Pros on sale! Preorder at Amazon...
Apple’s new 16″ MacBook Pros were only introduced yesterday, but Amazon is already offering a $100 discount on preorders. Prices for the base 6-Core 16″ MacBook Pros start at $2299: – 2019 16″ 2.6GHz... Read more
Use our exclusive MacBook Price Trackers to f...
Our Apple award-winning MacBook price trackers are the best place to look for the best sales & lowest prices on new and clearance MacBook Airs and MacBook Pros–including Apple’s new 16″ MacBook... Read more
New November Verizon iPhone deal: Get an iPho...
Verizon has the 64GB iPhone Xr on sale for 50% off for a limited time, plus they will include a free $200 prepaid MasterCard and a free Amazon Echo Dot. That reduces their price for the 64GB iPhone... Read more
Apple cuts prices on clearance, refurbished 2...
Apple has clearance 2018 15″ 6-Core Touch Bar MacBook Pros, Certified Refurbished, now available starting at only $1829. Each model features a new outer case, shipping is free, and an Apple 1-year... Read more
Up to $450 price drop on clearance 15″ MacBoo...
B&H Photo has dropped prices Apple’s 2019 15″ 6-Core and 8-Core MacBook Pros by $400-$450 off original MSRP, starting at $1999, with free overnight shipping available to many addresses in the US... Read more
Here’s how to save $200 on Apple’s new 16″ Ma...
Apple has released details of their Education discount associated with the new 2019 16″ 6-Core and 8-Core MacBook Pros. Take $200 off the price of the new 8-Core model (now $2599) and $200 off the 16... Read more
Price drop! 2019 15″ 2.6GHz 6-Core MacBook Pr...
Focus Camera has dropped their price for clearance 2019 15″ 2.6GHz 6-Core Space Gray MacBook Pros by $400 to $1999 shipped. Apple’s original MSRP for this model was $2399. Focus charges sales tax for... Read more

Jobs Board

Best Buy *Apple* Computing Master - Best Bu...
**746655BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Store NUmber or Department:** 002518-Atlantic Center-Store **Job Description:** Read more
*Apple* Mobility Pro - Best Buy (United Stat...
**744973BR** **Job Title:** Apple Mobility Pro **Job Category:** Store Associates **Store NUmber or Department:** 000949-Rochester Hills-Store **Job Description:** Read more
AV Systems Engineer at *Apple* - Theorem, L...
Job Summary Apple Retail Technology is looking for an Audio Visual Systems Engineer to design and implement scalable, next-generation A/V solutions for Apple ?s Read more
Nurse Practitioner - Field Based (San Bernard...
Nurse Practitioner - Field Based (San Bernardino, CA, Apple Valley, Hesperia) **Location:** **United States** **New** **Requisition #:** PS30312 **Post Date:** 3 Read more
Best Buy *Apple* Computing Master - Best Bu...
**746510BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Store Associates **Store NUmber or Department:** 001407-Milford-Store **Job Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.