TweetFollow Us on Twitter

Code Re-construction
Volume Number:2
Issue Number:9
Column Tag:Nosy News

The Art of Code Re-construction

By Steve Jasik, Menlo Park, CA

In this special article by the famous industry guru Steve Jasek, author of MacNosy, we get the inside scoop on the inner workings of Nosy and how to use it to best advantage. Since Steve is famous for his brief documentation, these pearls of wisdom will be most valuable, but be warned; this is not for the faint hearted, as Steve's technical background in compiler design is clearly evident. -Ed.

Sniffing Around with MacNosy

As I sit here pecking away on my Mac, it is mid June. Nosy 2.099 has been finalized and 2.1 is in progress. Most of the features I discuss in this article are in 2.099, and the rest will appear in 2.1 which will ship in July.

For starters, I'd like to try and answer some rhetorical questions such as:

What is and why use Nosy, and what advantage does it offer over other methods of obtaining information about programs?

Hypertext for programmmers

Nosy is a fancy disassembler with extensive reference map (Hypertext for programmmers?) and symbol substitution facilities that verges on being a de-compiler. Nosy can be used to obtain information about any program or resource that consists of 68000 native code. It does not handle Pcode, Mcode, etc. It can be used to obtain accurate and informative listings of the ROM (64 or 128K), resources on the system file, etc. It knows about the special structure of DRVR's (desk accessories) and PDEF's. It can create '.asm' files that can be fed into the MDS assembler. Later on this year it will be modified so that its output will be compatable with the MPW (Macintosh Programmer's Workshop) assembler.

Because it subdivides the program up into procedures and data blocks, and creates reference maps for those symbols, one is able to analyze what the program is doing without having to execute it in many cases. When Nosy is used in conjunction with a ".map" file produced by a Linker or the debug symbols left in the code by most compilers one can use it as a "source" level cross reference map facility for one's own program. This can aid in tracking down bugs or making modifications to the program. [Note: TML, LightSpeed and Consulair support debug code in their compilation that aids Nosy. -Ed.]

You Didn't Read this Section in MacTutor!

In the same vein one can use Nosy to locate and analyze copy protection code. Modifications scheduled for V2.1 will let one disassemble CODE segments from programs that are running in another partition under Switcher. This will allow one to analyze copy protection code that has been encrypted in the disk file copy of the program. The fun thing about this mod is that no program that is Switcher friendly will be able to protect against this form of copy protection analysis as they have no real way of knowing that Nosy is looking at them, and one will not need to make a debugger initially active, so programs that check for the presence of one, and then blowup will be hoodwinked. Note that some programs check for the presence of a debugger by inspecting the interrupt vector address's ( 0 to $100) to ensure that they reference ROM and blowup if they don't.

Fig. 1 Call Graph

Given the proper order of things in starting up Switcher, Nosy and the program to be analyzed, Nosy will temporarly put any debugger to "sleep" so any other program cannot detect its presence. After one has patched the code in the program that disables the debugger, one can wake up the debugger, and use a combination of it and Nosy to locate and disable the copy protection code. I am temped to offer a prize to anyone who can devise a method that cannot be cracked by Nosy. [Ouch! -Ed.]

More Coming

While I am in the process of teaching Nosy how to locate the CODE segments of running programs, I thought it would also be nice if Nosy was fixed so that it could disassemble arbitrarly large programs in 512K.

My motives for adding this facility at this time are two. Firstly to allow the analysis of programs that would not fit into memory, and secondly I will be needing more space for tables in order to do global data flow analysis soon.

You can also use Nosy for code inspection of your own application. As Nosy grows in size, I use Nosy on itself to look at the code generated by Lisa Pascal to see what code it is generating for a given sequence of statements, and when the code looks like it can be trimmed by choosing another sequence I rewrite it by using the type-casting facility, etc.

Other reasons for using Nosy are to learn about 68000 code, and how Macintosh applications are structured. The Nosy disk contains a number of interesting examples, including a fast Shell sort which is extensively commented, and describes my assembly language coding techniques.

Fig. 2 Flow Graph for above example

Compilers and Data Flow Analysis

Nosy makes use of a variety of techniques that are similar to those used in compilers. For example, it has a variety of symbol tables, which use the address of the symbol instead of the name as the primary lookup key. It also uses control and data flow analysis to obtain information about the structure of the program, but first some terminology and review. Control flow analysis, which concerns itself with the flow of execution in a program, is familiar to many programmmers.

A Basic block consists of a sequence of contigious statements such that if any statement in the block is executed, all are. Basic blocks end prior to an active label or after a jump instruction which would be representated in a higher level language by an if, case or goto statment. In a flow graph basic blocks are the nodes (the circles) and the edges are the possible flow paths of execution. (See fig. 1 for a diagram of a Basic Block). The usual conventions are that flow is from top to bottom with backward branchs representated as curved lines. The ground symbol represents the return statement. In the example below we have a simple for loop with a side branch that the programmmer would have written as:

 for j := Low to upLim do 
 if a[j] <> 0 then B[j] := B[j] / a[j];
 Return

In the process of analyzing the code, compilers will invent labels for basic blocks that are the target of branch instructions, which is why I rewrote the code in the diagram in fig. 2.

The process of collecting the flow of control information is a fairly simple one. Analyzing it to find the loops in the program, etc is slightly more complicated, but straightforward. When one does this on an inter-procedural level the resulting graph is called the "program call graph." Building a complete call graph in the presence of procedures that accept parameters as arguments is somewhat more difficult. For compilers this is no real problem, as very few of them do inter-procedural optimization. For Nosy it represents a real problem, as initially it does not know what the arguments to user procedures are or their types. To date, my solution to the problem has been to let the user supply the information manually by the Review data and IsProc commands which are discussed in the next section.

Fig. 3 Review Data command in window mode

Before we can discuss how Nosy can complete the call graph automatically, I need to say a bit about data flow analysis, which is the process of collecting information about the way variables are used in a program. In order to do effective global optimization or de-compilation one has to collect both control and data flow information. The exact sequence of events is that the control flow information for a procedure and the data flow tables for the basic blocks in a procedure are built first. Then the control flow information is used to "solve" the data flow equations globally. The questions that an optimizing compiler will be able to answer with the data flow information are:

What variables are not defined in the loop? The resulting set of expressions that use the variables are candidates for code motion out of the loop, etc.

When does the value of a variable that is assigned to a register in a loop have to be placed in memory prior to exit (is Live on exit) from a loop or more generally a basic block? This is usually called the Live/Dead information.

The information that a compiler collects for each variable/array in a basic block is called the use/def info, and consists of three bits for each variable; used in the block, defined in the block and used before definitation. From this and the control flow information one can develop the Live/Dead information.

For most real languages, the problem of building the use/def tables is compounded by alaising of names due to the presence of array references, or pointer variables which may point to the same location in memory at run-time. Most of you are familiar with the problem, but without giving it a name. As a simple example of alaising, consider the following sequence where p is a pointer to an integer:

p := addr(i);    { p is equivalenced or alaised to i }
x := A[i];
p^ := 2;
 y := A[i];    {would it be valid to change this to y := x;  ?? }

Given the above code it would be imprudent for an optimizing compiler to replace the second reference to A[i] ] with x, for example, since the value of i has been changed directly in memory, and thus the programmer expects x and y will have different values!

Fig. 4 IsProc command

The primary effect of alaising is to inhibit code optimization. Compilers for languages such as C, with its weak typing of pointer variables have a difficult time in producing good code in the presence of stores to pointer based variables.

Now back to Nosy. Another form of data flow problem concerns itself with determining the type of a variable based on its usage. This is the problem that Nosy has to solve if it is to automatically recognize procedural parameters and propagate this information back to the calls so that all code blocks will be recognized as such. To do this Nosy must perform a symbolic simulation of the 68000 registers and stack as it disassembles the instructions to determine the usage of variables in a basic block, and that it keep enough control flow information around so it can propagate the type information out of the procedure and back to the caller. I started to work on this problem a few weeks ago and got sidetracked by the needs of my documentator to complete window mode so that we could document the visable parts of Nosy. With luck I'll get back to it in time to show it off at the August MacWorld show.

As a final note in this section, the topics discussed here are relatively old hat, [! -Ed.] and one can find a more complete discussion of optimization and flow analysis in chapter 10 of the "Red Dragon" book by Aho, Sethi & Ullman (Addison-Wesley). It's correct title is "Compilers, Principles, techniques and Tools". It is a standard text book for Comp Sci undergraduates. I recommend its purchase to anyone who is interested in understanding the structure of compilers.

Fig. 5 Case Jumps

Using Nosy to reformat Data

Nosy analyzes a program by walking the tree of procedures to build the program call graph. At present, the treewalk is a one pass algorithm which recognizes the procedure entry points by their references in JSR's. Procedures that are passed as parameters (a common practice in Mac programs) are not recognized as code unless there is an explicit reference to them in a JSR. This creates the situation that not all the code is exposed by Nosy. To get around this problem, I created the Review data command which lets one inspect the data blocks, and reformat them as one wishs.

Now I have converted the Review data command to window mode, one can see the context in which a data block is referenced and do a more inteligent job of redefining the format of the block, be it code or otherwise.

When the Review data command is selected, Nosy cleans up the desktop by closing all the active windows except for the "-Notes-" window which is a scratchpad for your and Nosy's use. It then puts up a modeless dialog window for keyboard entry at the top of the screen, a menu window below it, a "-Data Blk-" window which displays the data block to be modified, and a '-Uses=" window with a display of a reference to the data block, if any exists. In Review data mode, all keyboard input is directed to the command window.

The illustration in figure 3 [RevDAT 1] shows the label data410 passed to APPENDST which we might guess to be a string concatenate routine. With this information, it is easy to surmise that data410 is a Pascal string. If one wanted to find out what APPENDST did, all one has to do is double click on the name and ctl-D to bring up a display of it. The only reason for reformatting all the data blocks in a program is if one wanted to "Cut and Paste" the code in it into another application.

An alternative way of reformatting data blocks in window mode is to mark them as procedure entry points with the "Is Proc" command. Data blocks marked as "IsProc" will be treated as the entry point to a procedure on all subsequent treewalks. In some programs, such as the PTCH resource in the System file, which contains the patchs to the ROM, it is easier to mark the data labels with the IsProc command then it is via Review data. Figure 4 [Ptch IsProc] illustrates the use of this command.

One hi-lites a data label, and then selects the "Is Proc" command. As an aside, note that most of the System Globals that begin with a lowercase j contain a pointer to the address of a routine, so one may Isproc them with impunity.

Case Statment Analysis

Another reason that all the code may not be apparant to Nosy is because of case statements that it cannot understand. The Case Jumps display (Fig. 5 next page) lets you determine which jumps are causing Nosy problems. The "Link Jump to Table" command lets you specify information about the jump so that Nosy can process it correctly the next time a treewalk is done. In figure 6 [Lnk JMP2] we see that the offending case jump table consists entirely of negative entries so Nosy has declined to set the length of the table at 7, which can be done with the dialog box in the upper left hand corner of the display. The basic problem is that during the treewalk when Nosy inspects the jump instruction, it does not know the length of the data block. Because all the jump table entries are negative, it is not sure where the table ends. When a jump table has at least one positive entry, Nosy can use that entry to determine the length of the jump table based on the assumption that code for the cases immediately follow the jump table.

The table format of this case statement is JUMPP, which means that the the jump table is to be interpreted as program relocatable offsets to procedure labels. The JUMPC format defines a case or switch table to be a set of jumps to com_ labels (code which is branched to by a JMP, BRA or Bxx instruction). The normal format for a case table which consists of jumps to labels local to a procedure is JUMPL. It is sometimes useful to break up a big procedure with a case table into smaller procedures by changing the format of the case table from JUMPL to JUMPC.

Closing thoughts

In writing the above section I was temped to go back, reinspect my algorithms and see if I couldn't automatically recognize the case discussed in the first example. After all, it is easier to solve the problem once in the product as opposed to have to explain it many times to others. Unfortunately Nosy does need human help in recognizing some patterns, and those of us who use it should be familiar with techniques for reformatting data, etc. Some time ago a famous industrial engineer, Peter Denning told an audience of Twist Drill manufacturers that what their customers wanted was not drills, but holes. I remind myself that what you want is information without hassle, and to that end I will continue to improve Nosy so the de-compilation process runs more on automatic, and less on manual. [Please help support Steve's efforts in our behalf by both BUYING Nosy and spreading the WORD, not the DISK. -Ed.]

Fig. 6 Correcting Table Jumps

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

SketchUp 19.1.174 - Create 3D design con...
SketchUp is an easy-to-learn 3D modeling program that enables you to explore the world in 3D. With just a few simple tools, you can create 3D models of houses, sheds, decks, home additions,... Read more
ClamXav 3.0.12 - Virus checker based on...
ClamXav is a popular virus checker for OS X. Time to take control ClamXAV keeps threats at bay and puts you firmly in charge of your Mac’s security. Scan a specific file or your entire hard drive.... Read more
BetterTouchTool 3.151 - Customize multi-...
BetterTouchTool adds many new, fully customizable gestures to the Magic Mouse, Multi-Touch MacBook trackpad, and Magic Trackpad. These gestures are customizable: Magic Mouse: Pinch in / out (zoom)... Read more
FontExplorer X Pro 6.0.9 - Font manageme...
FontExplorer X Pro is optimized for professional use; it's the solution that gives you the power you need to manage all your fonts. Now you can more easily manage, activate and organize your... Read more
Dropbox 77.4.131 - Cloud backup and sync...
Dropbox is an application that creates a special Finder folder that automatically syncs online and between your computers. It allows you to both backup files and keeps them up-to-date between systems... Read more
DiskCatalogMaker 7.5.3 - Catalog your di...
DiskCatalogMaker is a simple disk management tool which catalogs disks. Simple, light-weight, and fast Finder-like intuitive look and feel Super-fast search algorithm Can compress catalog data for... Read more
Notion 1.0.7 - A unified workspace for m...
Notion is the unified workspace for modern teams. Notion Features: Integration with Slack Documents Wikis Tasks Note: This application contains in-app and/or external module purchases. Version 1.0... Read more
Microsoft Office 2016 16.16.12 - Popular...
Microsoft Office 2016 - Unmistakably Office, designed for Mac. The new versions of Word, Excel, PowerPoint, Outlook, and OneNote provide the best of both worlds for Mac users - the familiar Office... Read more
Little Snitch 4.4.2 - Alerts you about o...
Little Snitch gives you control over your private outgoing data. Track background activity As soon as your computer connects to the Internet, applications often have permission to send any... Read more
MainStage 3 3.4.3 - Live performance too...
Apple MainStage makes it easy to bring to the stage all the same instruments and effects that you love in your recording. Everything from the Sound Library and Smart Controls you're familiar with... Read more

Latest Forum Discussions

See All

Upcoming visual novel Arranged shines a...
If you’re in the market for a new type of visual novel designed to inform and make you think deeply about its subject matter, then Arranged by Kabuk Games could be exactly what you’re looking for. It’s a wholly unique take on marital traditions in... | Read more »
TEPPEN guide - The three best decks in T...
TEPPEN’s unique take on the collectible card game genre is exciting. It’s just over a week old, but that isn’t stopping lots of folks from speculating about the long-term viability of the game, as well as changes and additions that will happen over... | Read more »
Intergalactic puzzler Silly Memory serve...
Recently released matching puzzler Silly Memory is helping its fans with their intergalactic journeys this month with some very special offers on in-app purchases. In case you missed it, Silly Memory is the debut title of French based indie... | Read more »
TEPPEN guide - Tips and tricks for new p...
TEPPEN is a wild game that nobody asked for, but I’m sure glad it exists. Who would’ve thought that a CCG featuring Capcom characters could be so cool and weird? In case you’re not completely sure what TEPPEN is, make sure to check out our review... | Read more »
Dr. Mario World guide - Other games that...
We now live in a post-Dr. Mario World world, and I gotta say, things don’t feel too different. Nintendo continues to squirt out bad games on phones, causing all but the most stalwart fans of mobile games to question why they even bother... | Read more »
Strategy RPG Brown Dust introduces its b...
Epic turn-based RPG Brown Dust is set to turn 500 days old next week, and to celebrate, Neowiz has just unveiled its biggest and most exciting update yet, offering a host of new rewards, increased gacha rates, and a brand new feature that will... | Read more »
Dr. Mario World is yet another disappoin...
As soon as I booted up Dr. Mario World, I knew I wasn’t going to have fun with it. Nintendo’s record on phones thus far has been pretty spotty, with things trending downward as of late. [Read more] | Read more »
Retro Space Shooter P.3 is now available...
Shoot-em-ups tend to be a dime a dozen on the App Store, but every so often you come across one gem that aims to shake up the genre in a unique way. Developer Devjgame’s P.3 is the latest game seeking to do so this, working as a love letter to the... | Read more »
Void Tyrant guide - Guildins guide
I’ve still been putting a lot of time into Void Tyrant since it officially released last week, and it’s surprising how much stuff there is to uncover in such a simple-looking game. Just toray, I finished spending my Guildins on all available... | Read more »
Tactical RPG Brown Dust celebrates the s...
Neowiz is set to celebrate the summer by launching a 2-month long festival in its smash-hit RPG Brown Dust. The event kicks off today, and it’s divided into 4 parts, each of which will last two weeks. Brown Dust is all about collecting, upgrading,... | Read more »

Price Scanner via MacPrices.net

Clearance 12″ 1.2GHz MacBook on sale for $899...
Focus Camera has clearance 12″ 1.2GHz Space Gray MacBooks available for $899.99 shipped. That’s $400 off Apple’s original MSRP. Focus charges sales tax for NY & NJ residents only. Read more
Get a new 2019 13″ 2.4GHz 4-Core MacBook Pro...
B&H Photo has new 2019 13″ 2.4GHz MacBook Pros on sale for up to $150 off Apple’s MSRP. Overnight shipping is free to many addresses in the US: – 2019 13″ 2.4GHz/256GB 6-Core MacBook Pro Silver... Read more
AirPods with Wireless Charging Case now on sa...
Amazon has extended their Prime Day savings on Apple AirPods by offering AirPods with the Wireless Charging case for $169.99. That’s $30 off Apple’s MSRP, and it’s the cheapest price available for... Read more
New 2019 15″ MacBook Pros on sale for $200 of...
B&H Photo has the new 2019 15″ 6-Core and 8-Core MacBook Pros on sale for $200 off Apple’s MSRP. Overnight shipping is free to many addresses in the US: – 2019 15″ 2.6GHz 6-Core MacBook Pro Space... Read more
Amazon drops prices, now offers clearance 13″...
Amazon has new dropped prices on clearance 13″ 2.3GHz Dual-Core non-Touch Bar MacBook Pros by $200 off Apple’s original MSRP, with prices now available starting at $1099. Shipping is free. Be sure to... Read more
2018 15″ MacBook Pros now on sale for $500 of...
Amazon has dropped prices on select clearance 2018 15″ 6-Core MacBook Pros to $500 off Apple’s original MSRP. Prices now start at $1899 shipped: – 2018 15″ 2.2GHz Touch Bar MacBook Pro Silver: $1899.... Read more
Price drop! Clearance 12″ 1.2GHz Silver MacBo...
Amazon has dropped their price on the recently-discontinued 12″ 1.2GHz Silver MacBook to $849.99 shipped. That’s $450 off Apple’s original MSRP for this model, and it’s the cheapest price available... Read more
Apple’s 21″ 3.0GHz 4K iMac drops to only $936...
Abt Electronics has dropped their price on clearance, previous-generation 21″ 3.0GHz 4K iMacs to only $936 shipped. That’s $363 off Apple’s original MSRP, and it’s the cheapest price we’ve seen so... Read more
Amazon’s Prime Day savings on Apple 11″ iPad...
Amazon has new 2018 Apple 11″ iPad Pros in stock today and on sale for up to $250 off Apple’s MSRP as part of their Prime Day sale (but Prime membership is NOT required for these savings). These are... Read more
Prime Day Apple iPhone deal: $100 off all iPh...
Boost Mobile is offering Apple’s new 2018 iPhone Xr, iPhone Xs, and Xs Max for $100 off MSRP. Their discount reduces the cost of an Xs to $899 for the 64GB models and $999 for the 64GB Xs Max. Price... Read more

Jobs Board

*Apple* IOS Systems Engineer - Randstad (Uni...
Apple IOS Systems Engineer **job details:** + location:Irvine, CA + salary:$45 - $55 per hour + date posted:Tuesday, July 16, 2019 + job type:Temp to Perm + Read more
Business Development Manager, *Apple* Globa...
Business Development Manager, Apple Global Tampa, FL, US Requisition Number:73805 As a Global Apple Business Development Manager at Insight, you proactively Read more
*Apple* Systems Architect/Engineer, Vice Pre...
…its vision to be the world's most trusted financial group. **Summary:** Apple Systems Architect/Engineer with strong knowledge of products and services related to Read more
*Apple* Graders/Inspectors (Seasonal/Hourly/...
…requirements. #COVAentryleveljobs ## Minimum Qualifications Some knowledge of agricultural and/or the apple industry is helpful as well as the ability to comprehend, Read more
Best Buy *Apple* Computing Master - Best Bu...
**710003BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Store Associates **Location Number:** 000171-Winchester Road-Store **Job Description:** Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.