TweetFollow Us on Twitter

PostScript Print
Volume Number:2
Issue Number:6
Column Tag:PostScript Printing

Place PostScript in MacWrite Documents

By Mike Schuster, Adobe Systems, MacTutor Contributing Editor

Embed PostScript in Fonts and Pictures

When a Macintosh application prints to Apple's LaserWriter printer, the Printing Manager converts the sequence of QuickDraw operations that the application used to image the document on the screen into a PostScript® program that describes the appearance of the document on printed pages. The Printing Manager then transmits this program to the LaserWriter, which contains a PostScript interpreter bundled with a xerographic marking engine. The interpreter executes the page description and produces output on the attached output device.

The PostScript language itself was designed by Adobe Systems, Inc. to be a high-level, device independent page description language with powerful text and graphics capabilities. PostScript includes operators to outline or fill any arbitrary graphical shape constructed from straight lines, arcs, and cubic polynomical curves; to treat any shape as a clipping path to crop any other graphics; and to render text and sampled images of arbitrary resolution at any size or angle on the page.

Quickdraw versus PostScript

Normally, PostScript programs are generated automatically by the Printing Manager when the application's client selects the Print command. Let us briefly review how this is done. On the Mac, all drawing is done through the quickdraw routines. On the Laser, all drawing is done through PostScript. Hence quickdraw calls must be converted to the closest PostScript equivalent. Quickdraw is designed so that all the quickdraw routines reduce down to a dozen or so standard drawing routines. This lets an application designer write his own quickdraw routines by replacing these primary routines or "quickdraw verbs" with his own. The Print Manager converts each of these quickdraw verbs to a call on a PostScript procedure, which closely emulates the quickdraw action using PostScript primitives. The definition of that procedure is contained in Laserprep, which is downloaded into the Laserwriter. The PostScript procedures defined in the Laserprep file in effect re-define the quickdraw verbs in terms of PostScript commands. When you use the command-F key to produce a PostScript file, the Print Manager generates a file of procedure calls into this Laserprep file. So you couldn't use this PostScript file without the Laserprep file being downloaded into the Laserwriter first. Thus in normal printing, the Mac quickdraw environment is completely translated to a PostScript environment automatically through the actions of the Printing Manager and Laserprep. This automatic conversion is very useful, since neither the application's user nor its designer need to understand or worry about the details and concerns of the PostScript environment.

There are several situations, however, when it would be useful to type or paste raw PostScript commands directly into a document, so that the images generated by the commands are integrated on the printed page along with the rest of the document. The reason for this is that neither QuickDraw nor current applications are capable of imaging the full repetoir of PostScript graphics on the screen. Hence, many of the LaserWriter's powerful capabilities remain relatively unexplored and unexploited, at least when using MacWrite, MacDraw and MacPaint. And since the Laserwriter costs some $4800, it would be nice to be able to use all of it's capabilities!

But there is lots of good news on the horizon. Apple's new Printing Manager, version 3.1, contains several useful facilities for including PostScript in a document. Apple is madly documenting its capabilities. As a preview, we'll look at what you can do with them.

The “PostScript Escape” Font

The new Printing Manager treats any text in the font named “PostScript Escape” as PostScript commands and sends the text straight through to the LaserWriter. When the Print Manager sees text displayed in the PostScript Escape font, that text is not converted into a Laserprep text drawing call, but simply inserted into the rest of the PostScript file. In this way, pure postscript is included in this file of Laserprep calls and executed directly by the laserwriter.

Any font may be used as the "PostScript Escape" font, but consider this example using the font I've created (available on source code disk #9 from the MacTutor mail order store). Here is an example. First, type the following PostScript program into the middle of a MacWrite document:

gsave initgraphics
/Times-BoldItalic findfont 27 scalefont setfont
/rays
 { 0 1.5 179
 { gsave rotate 0 0 moveto 108 0 lineto stroke grestore } for
 } def
300 400 translate .25 setlinewidth
newpath 0 0 moveto (StarLines) true charpath clip
newpath 54 -15 translate rays
grestore

Then hilight the whole paragraph, and select my PostScript Escape font from MacWrite's Font menu. The paragraph will disappear! Now print the document. The effects of the embeded postscript will appear in the LaserWriter printout.

Invisible Fonts

Whats going on? First, my PostScript Escape font is invisible! Using Apple's ResEdit, I made a copy of the Times 12 point font and called it PostScript Escape. Then I erased all of the black bits in the entire font and set the width of each letter to zero. Then I reduced the ascent and descent so that the font is only 1 point tall. Finally, I pasted the font into my System file. You can do the same thing to create this font if you don't want to wait to get it on a source code disk.

Why bother with an invisible font? If the PostScript Escape font was visible, then any PostScript set in it would leave blank areas on the printed page, since MacWrite assumes that the text will be printed as it appears on the screen. Since only the graphic objects that the PostScript produces are visible on the printed page, we have no choice but to make it invisible, otherwise we would loose screen- page fidelity.

How does one edit invisible text? Easy, just select something that includes the PostScript and change the whole thing to Times, for example. Edit the PostScript, make it invisible again, and print.

PostScript Considerations

When you imbed normal postscript in MacWrite, your postscript image will come out upside down. This is because the coordinate reference system for quickdraw and postscript are opposite. You fix this by adding in front of the postscript two calls:

gsave initgraphics
now add your postscript stuff
grestore

This has the effect of saving the Print Managers coordinate system, initializes the default postscript coordinate system, then it draws the postscript, and finally restores the print manager's coordinate system. In PostScript, (0,0) is at the bottom of the page, while in quickdraw (0,0) is at the top of the page. In our example above we have added these commands so the PostScript has the same orientation as the rest of the Macwrite file.

Another problem is placement. Paste the postscript at the bottom of the page, so the Macwrite stuff does not overwrite the postscript image. Or if you estimate where your figure should be placed on the page, you can leave space in the Macwrite document for the figure, and place your postscript stuff in the blank box, but remember you have to set your postscript coordinates in your postscript commands to match that box area. The Print Manager doesn't tell you where it is on the page!

Pagemaker Doesn't Work!

Pagemaker does not use the default Print Manager routines, which makes calls on Laserprep. Rather it calls it's own RAM based Print Manager in Pagemaker which makes calls on Aldusprep, and this Pagemaker Print Manager does not know about this PostScript escape routine so it will be treated like a regular text font, and hence there still is no way to imbed PostScript into your Pagemaker layout! Pagemaker is supposed to be updating their product to support these new print manager functions sometime this summer. They will add a PostScript place command to place PostScript text files in a manner similar to placing a MacWrite file. A quickdraw picture feature will allow the quickdraw picture to represent the postscript stuff and make placement on the page as easy as placing a MacDraw figure. If they can pull this off in a timely manner, it will greatly increase the sophistication level of Pagemaker in the marketplace.

Get a copy of PostScript Language Reference Manual and PostScript Language Tutorial and Cookbook, by Adobe Systems and published by Addison-Wesley and use this technique to try out some of the examples.

PostScript in Pictures

The new Printing Manager also has some goodies for those of you who use QuickDraw pictures. Try embedding the following C code into a picture or place them between a PrOpenPage and a PrClosePage in your printing loop:

C Code Example

open picture(@rect);
fillrect(@rect, white);
PicComment(190, 0, 0l); /* Begin PostScript mode */

/* Send following Quickdraw text as PostScript */
PicComment(194, 0, 0l); /* this is postscript escape font */
DrawText("/pgsave initgraphics");
DrawText("\p/Times-BoldItalic findfont 27 scalefont setfont");
DrawText("\p/rays");
.../* add postscript commands */
DrawText("\pgrestore");

PicComment(191, 0, 0l); /* End PostScript mode */
close picture;

Print Manager Bug

The fillrect simply draws a white rectangle to get around a bug in the print manager which causes it to think this is a blank page unless it sees at least one quickdraw drawing command. The white rectangle on white obviously won't do anything we can see, but it will force the Print Manager to then show our postscript stuff rather than a blank page.

These PicComment calls are intercepted by the Printing Manager. Comments 190 and 191 bracket the PostScript, and comment 194 tells the Printing Manger that the following text is set in the PostScript Escape font, so the Printing Manager simply forwards all of the text to the Laserwriter.

The Parkhurst Picture

What else does the Printing Manager do? A while back Bill Parkhurst, author of the T/Maker's ClickArt Effects package, argued that each QuickDraw Picture should have two forks - a QuickDraw fork and a PostScript fork. When such a picture is drawn on the screen or printed on the ImageWriter, only the QuickDraw fork is used. When it is printed on a PostScript printer, only the PostScript is used. You get the best of both worlds, good looking printed documents and good screen approximations without the need for a PostScript interpreter resident on the Macintosh. Apparently, version 3.1 has some support for the Parkhurst Picture, but details have yet to be documented, and there is some doubt whether the implementation will work in the current version. It is not known if Apple is planning to support this untested code features.

Downloadable font problems: With this implementation of PostScript escape, a needed downloaded font will not be donwloaded unless the font is used in the regular quickdraw portion of the file.

Laserwriter Plus RAM memory problems: One of the great mysteries is why Apple did not increase the RAM memory in the Laserwriter Plus so that downloadable fonts could be supported. As it is now, only one small font can be downloaded at a time due to the fact that only about 50K of RAM is left. Application programs could be designed to get around this problem by imaging the page one font at a time, rather than composing all the page at once. The page should be reorganzied by the application by font, so that each font component is sent only once to the printer. An ascii postscript file sort program that sorts the postscript by font and sends it to the printer in the sorted order, using one font at a time on a page basis would be a great utility program. It also would be great to design this abilitiy into existing page makeup software.

Another fix is to use the note operator which allows drawing in a smaller area on the page in one of three page sizes: letter, note and legal. Using note size, the RAM previously allocated for the whole page area is now smaller by 100K, which can be used by fonts so up to 4 downloadable fonts can be supported, but you have to use the note operator in your own postscript file. The Print Manager uses the note operator automatically. The Page Setup allows you select between note size (7.7 by 10.2 on a page 8.5 by 11) and legal size (6.7 by 13 on an 8.5 by 14 inch page). Letter size (8 by 11 on a 8.5 by 11 inch page is not supported by the Print Manager, which is why you can't print to the edge of the page. The note operator can select letter size in a custom postscript file however. Aldus prep does not use the note operator. Because there is not enough RAM memory in the Laserwriter Plus or the Laserwriter, you can't have both a full size page and downloadable fonts.

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Drop to GIF 1.28 - Drag-and-drop creatio...
Drag to GIF means zero-click movie-to-GIF conversion. Select a folder to watch and every movie saved or moved into that folder will be converted to an animated GIF. Features Dragging - Drag a movie... Read more
BetterTouchTool 3.158 - Customize multi-...
BetterTouchTool adds many new, fully customizable gestures to the Magic Mouse, Multi-Touch MacBook trackpad, and Magic Trackpad. These gestures are customizable: Magic Mouse: Pinch in / out (zoom)... Read more
NeoFinder 7.4.1 - Catalog your external...
NeoFinder (formerly CDFinder) rapidly organizes your data, either on external or internal disks, or any other volumes. It catalogs and manages all your data, so you stay in control of your data... Read more
Tunnelblick 3.8.0 - GUI for OpenVPN.
Tunnelblick is a free, open source graphic user interface for OpenVPN on OS X. It provides easy control of OpenVPN client and/or server connections. It comes as a ready-to-use application with all... Read more
Tweetbot 3 for Twitter 3.3.1 - Popular T...
Tweetbot is a full-featured OS X Twitter client with a lot of personality. Whether it's the meticulously-crafted interface, sounds and animation, or features like multiple timelines and column views... Read more
Monosnap 3.5.9 - Versatile screenshot ut...
Monosnap lets you capture screenshots, share files, and record video and .gifs. Features Capture Capture full screen, just part of the screen, or a selected window Make your crop area pixel... Read more
Monosnap 3.5.9 - Versatile screenshot ut...
Monosnap lets you capture screenshots, share files, and record video and .gifs. Features Capture Capture full screen, just part of the screen, or a selected window Make your crop area pixel... Read more
Tweetbot 3 for Twitter 3.3.1 - Popular T...
Tweetbot is a full-featured OS X Twitter client with a lot of personality. Whether it's the meticulously-crafted interface, sounds and animation, or features like multiple timelines and column views... Read more
Tunnelblick 3.8.0 - GUI for OpenVPN.
Tunnelblick is a free, open source graphic user interface for OpenVPN on OS X. It provides easy control of OpenVPN client and/or server connections. It comes as a ready-to-use application with all... Read more
Bookends 13.2.5 - Reference management a...
Bookends is a full-featured bibliography/reference and information-management system for students and professionals. Bookends uses the cloud to sync reference libraries on all the Macs you use.... Read more

Latest Forum Discussions

See All

Void Tyrant guide - Tips and tricks for...
Void Tyrant continues to get a lot of play in these parts. Probably because the game is just so deep and varied. The next stop on our guide series for Void Tyrant is class-specific guides. First up is the Knight, as it’s the first class anyone has... | Read more »
Summon beasts and battle evil in epic re...
Imagine a tale of conlict between factions of good and evil, where rogueish heroes summon beasts to aid them in them in warfare and courageously battle dragons over fields of scorched earth and brimstone - that's exactly the essence of epic fantasy... | Read more »
Upcoming visual novel Arranged shines a...
If you’re in the market for a new type of visual novel designed to inform and make you think deeply about its subject matter, then Arranged by Kabuk Games could be exactly what you’re looking for. It’s a wholly unique take on marital traditions in... | Read more »
TEPPEN guide - The three best decks in T...
TEPPEN’s unique take on the collectible card game genre is exciting. It’s just over a week old, but that isn’t stopping lots of folks from speculating about the long-term viability of the game, as well as changes and additions that will happen over... | Read more »
Intergalactic puzzler Silly Memory serve...
Recently released matching puzzler Silly Memory is helping its fans with their intergalactic journeys this month with some very special offers on in-app purchases. In case you missed it, Silly Memory is the debut title of French based indie... | Read more »
TEPPEN guide - Tips and tricks for new p...
TEPPEN is a wild game that nobody asked for, but I’m sure glad it exists. Who would’ve thought that a CCG featuring Capcom characters could be so cool and weird? In case you’re not completely sure what TEPPEN is, make sure to check out our review... | Read more »
Dr. Mario World guide - Other games that...
We now live in a post-Dr. Mario World world, and I gotta say, things don’t feel too different. Nintendo continues to squirt out bad games on phones, causing all but the most stalwart fans of mobile games to question why they even bother... | Read more »
Strategy RPG Brown Dust introduces its b...
Epic turn-based RPG Brown Dust is set to turn 500 days old next week, and to celebrate, Neowiz has just unveiled its biggest and most exciting update yet, offering a host of new rewards, increased gacha rates, and a brand new feature that will... | Read more »
Dr. Mario World is yet another disappoin...
As soon as I booted up Dr. Mario World, I knew I wasn’t going to have fun with it. Nintendo’s record on phones thus far has been pretty spotty, with things trending downward as of late. [Read more] | Read more »
Retro Space Shooter P.3 is now available...
Shoot-em-ups tend to be a dime a dozen on the App Store, but every so often you come across one gem that aims to shake up the genre in a unique way. Developer Devjgame’s P.3 is the latest game seeking to do so this, working as a love letter to the... | Read more »

Price Scanner via MacPrices.net

13″ 1.8GHz MacBook Air on sale again for only...
Amazon has the 2017 13″ 1.8GHz/128GB MacBook Air on sale today for only $749.99 shipped. That’s $250 off Apple’s original MSRP for this model and the cheapest MacBook Air available from any Apple... Read more
Apple’s $1489 clearance price on refurbished...
Apple has Certified Refurbished 2018 13″ 2.3GHz 4-Core Touch Bar MacBook Pros available starting at $1489. Apple’s one-year warranty is included, shipping is free, and each MacBook has a new outer... Read more
New 2019 13″ 2.4GHz 4-Core MacBook Pros on sa...
Apple resellers B&H Photo and Amazon are offering the new 2019 13″ 2.4GHz 4-Core Touch Bar MacBook Pros for $150 off Apple’s MSRP. These are the same MacBook Pros sold by Apple in its retail and... Read more
B&H drops prices another $50 on clearance...
B&H Photo has dropped prices on clearance 2018 13″ MacBook Airs by a further $50 with models now available for $250 off Apple’s original MSRP. Overnight shipping, or expedited shipping, is free... Read more
Find the best sales & lowest prices on Ap...
Our Apple award-winning price trackers are the best place to look for the best sales and lowest prices on Apple gear. Scan our price trackers for the latest information on sales, bundles, and... Read more
Apple has clearance 2018 13″ MacBook Airs now...
Apple has Certified Refurbished 2018 13″ MacBook Airs available starting at only $849. Each MacBook features a new outer case, comes with a standard Apple one-year warranty, and is shipped free. The... Read more
Save $400 on the 8-Core iMac Pro today at Ama...
Amazon has the base 8-core iMac Pro on sale today for $4599 including free shipping. Their price is $400 off Apple’s MSRP, and it’s the currently lowest price available for an iMac Pro. For the... Read more
Flash sale! New 11″ 1TB WiFi iPad Pros for th...
Amazon has the 11″ 1TB WiFi iPad Pro on sale today for only $1199.99 including free shipping. Their price is $350 off Apple’s MSRP for this model, and it’s the lowest price ever for a 1TB 11″ iPad... Read more
Weekend Deal: 2018 13″ MacBook Airs starting...
B&H Photo has clearance 2018 13″ MacBook Airs available starting at only $999 with all models now available for $200 off Apple’s original MSRP. Overnight shipping, or expedited shipping, is free... Read more
Apple has clearance 10.5″ iPad Pros available...
Apple has Certified Refurbished 2017 10.5″ iPad Pros available starting at $469. An Apple one-year warranty is included with each iPad, outer shells are new, and shipping is free: – 64GB 10″ iPad Pro... Read more

Jobs Board

Best Buy *Apple* Computing Master - Best Bu...
**711495BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Store Associates **Location Number:** 000882-Waterfront-Store **Job Description:** The Read more
Best Buy *Apple* Computing Master - Best Bu...
**711597BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Location Number:** 000873-Colma CA-Store **Job Description:** **What does a Read more
Best Buy *Apple* Computing Master - Best Bu...
**711346BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Store Associates **Location Number:** 001095-Chesterfield-Store **Job Description:** Read more
Best Buy *Apple* Computing Master - Best Bu...
**704899BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Location Number:** 000135-Pleasant Hill-Store **Job Description:** **What does Read more
Best Buy *Apple* Computing Master - Best Bu...
**707083BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Location Number:** 000045-Rockford-Store **Job Description:** **What does a Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.