TweetFollow Us on Twitter

June 96 - Newton Q & A: Ask the Llama

Newton Q & A: Ask the Llama

Q I have a slip in my application that edits part of my application preferences. I use GetAppPrefs to get the preferences frame, and then set a pointer to a subframe in my slip:

myAppPref.viewSetupFormScript := func()
begin
   local prefs := GetAppPrefs(kAppSymbol, kDefaultPrefFrame);
   self.target := prefs.defaultNames;
   inherited:?viewSetupFormScript();
end
The user makes the change and I use EntryChangeXmit, but sometimes I lose the change. Any hints?

A It looks as if you're encountering an interaction between soup entries and garbage collection. In your viewSetupFormScript, you use GetAppPrefs to load the soup entry corresponding to your application preferences into the NewtonScript heap. Then you set a target slot in your preferences slip to the defaultNames slot in that preferences frame. I assume that some time later, probably in the viewQuitScript, you reload your preferences frame (with GetAppPrefs again) and call EntryChangeXmit on the frame returned by that call.

The problem occurs because you use a local variable to point to your preferences entry. Once the viewSetupFormScript is completed, this local goes away, so the preferences entry is subject to garbage collection. This may seem unintuitive since soups are where you store persistent data. However, there's a difference between the data that comprises an entry in a soup and an actual entry in the NewtonScript heap. When you request a soup entry, the data from the soup is swapped into the heap so that you can access it as a frame. The entry on the heap is a copy of the data in the soup, not the real data. Changes to that heap copy aren't written to the soup until you call EntryChangeXmit.

After your call to GetAppPrefs, the heap looks like Figure 1. Then your viewSetupFormScript returns and the prefs local goes away, so your heap looks like Figure 2.

Figure 1. Heap after GetAppPrefs

Figure 2. Heap after viewSetupFormScript Notice in Figure 2 how there is nothing referencing the preferences entry, but there is something referencing the defaultNames subobject. As far as the system is concerned, the preferences entry frame is now available for garbage collection. The next time the preferences entry is loaded in, an entire new copy of that entry is made, including the defaultNames subobject. So self.target points to a valid NewtonScript array that's different from the new copy of your preferences entry.

This explains why the information doesn't get updated, but not why this doesn't happen every time. It doesn't happen every time because the soup system will cache the frame representation of a requested entry. When you request an entry, the first thing the soup system does is check for a cached entry. If it exists, it's used, in which case the defaultNames subobject is the same one that self.target is referencing -- that is, no new copy of the preferences entry is loaded into the heap.

So, what happens is that once the user finishes editing the entry, you call GetAppPrefs, which may return the cached preferences entry. If garbage collection has occurred, your target slot will point to the edited version of the defaultNames structure, but not to the defaultNames slot value from the new preferences frame. Figure 3 shows the heap after garbage collection has occurred. After your call to GetAppPrefs, you get the situation shown in Figure 4. Your local prefs variable points to a new heap copy of the preferences entry, but your target slot points to the old defaultNames value. The EntryChangeXmit call will affect the new copy of the soup entry, leaving it apparently unchanged.

Figure 3. Heap after garbage collection

Figure 4. Heap after GetAppPrefs There are two ways to fix this: you could put the edited defaultNames structure into the preferences frame before calling EntryChangeXmit, or you could hold a reference to the application preferences in your slip (or in your base view) for the duration of the edit. The first way is more memory efficient.

The lesson is that keeping around references to objects inside soup entries is a dangerous practice. The safe thing to do is read in your entry, do the modifications, save the entry, and set the reference to nil.

Q I have an application that may print or fax many pages of information. I need to draw a lot of the content of those pages. I know that in 1.x viewDrawScripts, faxing needed to be fast. How about in 2.0? Are there better ways to go?

A The main thing missing in Newton 1.x OS is a method that gets called before the fax connection is made. In Newton 2.0 OS, the formatInitScript method of your print format will be called before the connection is made. You can use this script to do time-consuming drawing and cache the results for later use.

An extension of this technique is to render all your pages into a Virtual Binary Object and then access the appropriate place in that object during printing or faxing. The advantage of this is that you save heap space, since a VBO is paged in to a system heap (not the NewtonScript heap). For some devices this is the only way to print large numbers of pages.

Q The setup application uses some nifty embedded keyboards. I checked the beta version of the Newton Programmer's Guide for a prototype, but there doesn't appear to be one. Is this an oversight? How can I make these keyboards?

A There are several, as yet undocumented, ROM prototypes for embedded keyboards. They will appear in the final Newton Programmer's Guide, but for now they're in the Newton Toolkit platform file:

  • protoAlphaKeys -- alphanumeric keypad

  • protoNumericKeys -- numeric keypad

  • protoTouchtonePad -- minimal phonepad

  • protoPhonePad -- phonepad plus punctuation and arrow keys
All of these embedded keyboards will send input to the current key view. All you have to do is draw one in your layout and make sure the target view is the current key view. See the Newton DTS Q&A document on the Newton Developer CD for instructions on how to use an afterScript to set the proto of a view.

Q I'm porting my code from Newton 1.x OS to Newton 2.0 OS. When I build my project using Newton Toolkit 1.6 and the 2.0 platform file, I get an error telling me that k<insertNameHere>Func is undefined. What's the problem?

A The chances are that your 1.x code is using one of the platform file functions that either have been incorporated into ROM or are obsolete. However, developers may want to write code that works on both Newton 2.0 and 1.x devices. To enable this, we provide the old functions but we mark them as deprecated, which means they shouldn't be used in Newton 2.0-savvy applications, but can be used for compatibility reasons.

For example, in 1.x platform files there's a kRegisterCardSoupFunc function; in the 2.0 platform file, this is called kRegisterCardSoupDeprecatedFunc since there's a new and better way to register soups in Newton 2.0 OS. See the platform file release notes for a list of deprecated functions, protos, and so on.

Q How are reals represented in the package format? The data field for 12.345 is represented as 0x4028B0A3D70A3D71, for example.

A NewtonScript uses the Apple SANE double format (basically the IEEE format) for floating-point numbers. These are implemented as 8-byte binary objects of class real and contain a sign bit, 11 bits of biased exponent, and 52 bits of fraction.

0x4028B0A3D70A3D71 is the binary data (8 bytes) of the SANE representation of 12.345. It's the same data that's used to hold the number on the Newton itself.

Q I would like to add a separator line followed by some new application-specific actions. I proceeded to register a frame with the title as the symbol pickSeparator. It worked, except that the separator was selectable. All I'm trying to achieve is an eye-pleasing separation between the system actions and my actions. I also tried returning in the GetTitle routine a frame with

{item: 'pickSeparator, pickable: nil} 
but that resulted in a blank entry. Is there a way to do what I'm trying to do -- that is, to have a pickSeparator that isn't selectable in the action button?

A In the routeScripts array, you can use a nil value instead of a frame. That will add another pickSeparator at that position in the routeScripts. Note that the system will fill in the separator between the items that are routing transports (like Print) and the items that are actions (such as Delete). If you need to add this separator dynamically, you can provide your own GetRouteScripts method that dynamically returns the routeScripts frame.

That said, please check the latest Newton 2.0 User Interface Guidelines to make sure that you're putting a separator in a valid spot.

Q I'm profiling my application to see why it takes so long to open. However, of the time it takes to open, only a small percentage is spent in my code. I'm measuring from the start of the viewSetupFormScript to the end of the viewSetupDoneScript in my base view.

A There are a few things you can do. The first is to make sure you're profiling system functions to see if that's where the time is going. It may be that you're doing things in your startup process that would be better done at a later time.

You may also be running into low-memory conditions. Run the HeapShow utility that comes with Newton Toolkit and look at the frames heap and free system space (handles and pointers). You can do this in combination with NS Debug Tools to step through your code and track memory usage. Note that the Newton Toolkit inspector will use a fair bit of system space, so you may want to get a baseline memory usage without the inspector connected.

Q I'm having two problems with a protoPicker view. First, when I open a protoPicker view (whose vFloating flag I haven't turned off) it's obscured by a textButton in the main view. I can't figure out why it doesn't float over this plain vanilla textButton.

Also, I can't select some of the items in the picker. The inaccessible items appear last in the list, from the portion of the picker view that extends beyond the picker's parent view or the slip's main view.

The only unusual thing I can see here is that the protoPicker view is not a sibling of the textButton. The view hierarchy looks like this:

slipMainView
   clusterView
   protoPicker
   textButton
Can you help?

A It looks like the protoPicker is being opened as a child of the clusterView. This means that the active (tappable) area of the protoPicker will be clipped to the bounds of the clusterView. It also sounds like the clipping viewFlag of the clusterView isn't set. That allows the protoPicker to be drawn outside of its parent, so you may think it's clickable even when it isn't.

There are three possible solutions:

  • Resize the protoPicker so that it's no larger than the clusterView.

  • Make the protoPicker a child of a view higher up in the hierarchy (for example, the slipMainView).

  • If your protoPicker is larger than the application base view, use BuildContext to attach it to the root view.
Q How do I reset a protoTextList so that when I change the listItems and redisplay, the display starts at the first item again? Right now if I've scrolled the text list and then I reset it, the top item is wrong.

A The documentation mentions a SetupList method that you call when you initialize the view. However, this is not enough if you're changing the listItems after you've opened the textList. Since the current implementation of textList scrolls by offsetting the origin, you also need to reset the origin.

Here's a method that you can add to your own protoTextList that will add a text item and redraw the list correctly:

myProtoTextList.AddItem := func()
begin
   // make sure listItems is an array
   if NOT listItems then
      listItems := [];

   local newItem := GetRandomWord(5, 10);
   // insert in sorted order for strings
   BInsert(listItems, newItem, '|Str<|, nil, nil);

   // redisplay based on new data
   // this will reset the list to the top item
   :SetOrigin(0, 0);
   :SetupList();
   :RedoChildren();
end;
Q Can you write a funny Q&A ?

A Yes.

The llama is the unofficial mascot of the Developer Technical Support group in Apple's Newton Systems Group. Send your Newton-related questions to dr.llama@applelink.apple.com (AppleLink DR.LLAMA). The first time we use a question from you, we'll send you a T-shirt.*

Thanks to Xopher Bell, Henry Cate, Bob Ebert, Mike Engber, David Fedor, Ryan Robertson, Jim Schram, Maurice Sharp, and Bruce Thompson for these answers. Special thanks to Bob Ebert for the answer on the format of reals.*

If you need more answers, check out http://dev.info.apple.com/newton on the World Wide Web or look at Newton Developer Info on Applelink.*


 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Monosnap 3.5.9 - Versatile screenshot ut...
Monosnap lets you capture screenshots, share files, and record video and .gifs. Features Capture Capture full screen, just part of the screen, or a selected window Make your crop area pixel... Read more
Tweetbot 3 for Twitter 3.3.1 - Popular T...
Tweetbot is a full-featured OS X Twitter client with a lot of personality. Whether it's the meticulously-crafted interface, sounds and animation, or features like multiple timelines and column views... Read more
Tunnelblick 3.8.0 - GUI for OpenVPN.
Tunnelblick is a free, open source graphic user interface for OpenVPN on OS X. It provides easy control of OpenVPN client and/or server connections. It comes as a ready-to-use application with all... Read more
Bookends 13.2.5 - Reference management a...
Bookends is a full-featured bibliography/reference and information-management system for students and professionals. Bookends uses the cloud to sync reference libraries on all the Macs you use.... Read more
Quicken 2019 5.11.2 - Complete personal...
Quicken makes managing your money easier than ever. Whether paying bills, upgrading from Windows, enjoying more reliable downloads, or getting expert product help, Quicken's new and improved features... Read more
Bookends 13.2.5 - Reference management a...
Bookends is a full-featured bibliography/reference and information-management system for students and professionals. Bookends uses the cloud to sync reference libraries on all the Macs you use.... Read more
Quicken 2019 5.11.2 - Complete personal...
Quicken makes managing your money easier than ever. Whether paying bills, upgrading from Windows, enjoying more reliable downloads, or getting expert product help, Quicken's new and improved features... Read more
Dashlane 6.1927.0 - Password manager and...
Dashlane is an award-winning service that revolutionizes the online experience by replacing the drudgery of everyday transactional processes with convenient, automated simplicity - in other words,... Read more
Capo 3.7.4 - Slow down and learn to play...
Capo lets you slow down your favorite songs so you can hear the notes and learn how they are played. With Capo, you can quickly tab out your songs atop a highly-detailed OpenCL-powered spectrogram... Read more
BetterTouchTool 3.153 - Customize multi-...
BetterTouchTool adds many new, fully customizable gestures to the Magic Mouse, Multi-Touch MacBook trackpad, and Magic Trackpad. These gestures are customizable: Magic Mouse: Pinch in / out (zoom)... Read more

Latest Forum Discussions

See All

Void Tyrant guide - Tips and tricks for...
Void Tyrant continues to get a lot of play in these parts. Probably because the game is just so deep and varied. The next stop on our guide series for Void Tyrant is class-specific guides. First up is the Knight, as it’s the first class anyone has... | Read more »
Summon beasts and battle evil in epic re...
Imagine a tale of conlict between factions of good and evil, where rogueish heroes summon beasts to aid them in them in warfare and courageously battle dragons over fields of scorched earth and brimstone - that's exactly the essence of epic fantasy... | Read more »
Upcoming visual novel Arranged shines a...
If you’re in the market for a new type of visual novel designed to inform and make you think deeply about its subject matter, then Arranged by Kabuk Games could be exactly what you’re looking for. It’s a wholly unique take on marital traditions in... | Read more »
TEPPEN guide - The three best decks in T...
TEPPEN’s unique take on the collectible card game genre is exciting. It’s just over a week old, but that isn’t stopping lots of folks from speculating about the long-term viability of the game, as well as changes and additions that will happen over... | Read more »
Intergalactic puzzler Silly Memory serve...
Recently released matching puzzler Silly Memory is helping its fans with their intergalactic journeys this month with some very special offers on in-app purchases. In case you missed it, Silly Memory is the debut title of French based indie... | Read more »
TEPPEN guide - Tips and tricks for new p...
TEPPEN is a wild game that nobody asked for, but I’m sure glad it exists. Who would’ve thought that a CCG featuring Capcom characters could be so cool and weird? In case you’re not completely sure what TEPPEN is, make sure to check out our review... | Read more »
Dr. Mario World guide - Other games that...
We now live in a post-Dr. Mario World world, and I gotta say, things don’t feel too different. Nintendo continues to squirt out bad games on phones, causing all but the most stalwart fans of mobile games to question why they even bother... | Read more »
Strategy RPG Brown Dust introduces its b...
Epic turn-based RPG Brown Dust is set to turn 500 days old next week, and to celebrate, Neowiz has just unveiled its biggest and most exciting update yet, offering a host of new rewards, increased gacha rates, and a brand new feature that will... | Read more »
Dr. Mario World is yet another disappoin...
As soon as I booted up Dr. Mario World, I knew I wasn’t going to have fun with it. Nintendo’s record on phones thus far has been pretty spotty, with things trending downward as of late. [Read more] | Read more »
Retro Space Shooter P.3 is now available...
Shoot-em-ups tend to be a dime a dozen on the App Store, but every so often you come across one gem that aims to shake up the genre in a unique way. Developer Devjgame’s P.3 is the latest game seeking to do so this, working as a love letter to the... | Read more »

Price Scanner via MacPrices.net

Flash sale! New 11″ 1TB WiFi iPad Pros for th...
Amazon has the 11″ 1TB WiFi iPad Pro on sale today for only $1199.99 including free shipping. Their price is $350 off Apple’s MSRP for this model, and it’s the lowest price ever for a 1TB 11″ iPad... Read more
Weekend Deal: 2018 13″ MacBook Airs starting...
B&H Photo has clearance 2018 13″ MacBook Airs available starting at only $999 with all models now available for $200 off Apple’s original MSRP. Overnight shipping, or expedited shipping, is free... Read more
Apple has clearance 10.5″ iPad Pros available...
Apple has Certified Refurbished 2017 10.5″ iPad Pros available starting at $469. An Apple one-year warranty is included with each iPad, outer shells are new, and shipping is free: – 64GB 10″ iPad Pro... Read more
Apple restocks refurbished iPad mini 4 models...
Apple has restocked Certified Refurbished 32GB iPad mini 4 WiFi models for $229 shipped. That’s $70 off original MSRP for the iPad mini 4. Space Gray, Silver, and Gold colors are available. Read more
Apple, Yet Again, Is Missing An Ultraportable...
EDITORIAL: 07.19.19 Prior to the decision made by Apple earlier this month to retire the thin and light MacBook model with a 12-inch retina display, the Cupertino, California-based company offered,... Read more
Verizon is offering a 50% discount on iPhone...
Verizon is offering 50% discounts on Apple iPhone 8 and iPhone 8 Plus models though July 24th, plus save 50% on activation fees. New line required. The fine print: “New device payment & new... Read more
Get a new 21″ iMac for under $1000 today at t...
B&H Photo has new 21″ Apple iMacs on sale for up to $100 off MSRP with models available starting at $999. These are the same iMacs offered by Apple in their retail and online stores. Shipping is... Read more
Clearance 2017 15″ 2.8GHz Touch Bar MacBook P...
Apple has Certified Refurbished 2017 15″ 2.8GHz Space Gray Touch Bar MacBook Pros available for $1809. Apple’s refurbished price is currently the lowest available for a 15″ MacBook Pro. An standard... Read more
Clearance 12″ 1.2GHz MacBook on sale for $899...
Focus Camera has clearance 12″ 1.2GHz Space Gray MacBooks available for $899.99 shipped. That’s $400 off Apple’s original MSRP. Focus charges sales tax for NY & NJ residents only. Read more
Get a new 2019 13″ 2.4GHz 4-Core MacBook Pro...
B&H Photo has new 2019 13″ 2.4GHz MacBook Pros on sale for up to $150 off Apple’s MSRP. Overnight shipping is free to many addresses in the US: – 2019 13″ 2.4GHz/256GB 6-Core MacBook Pro Silver... Read more

Jobs Board

Best Buy *Apple* Computing Master - Best Bu...
**711346BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Store Associates **Location Number:** 001095-Chesterfield-Store **Job Description:** Read more
Best Buy *Apple* Computing Master - Best Bu...
**704899BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Location Number:** 000135-Pleasant Hill-Store **Job Description:** **What does Read more
Best Buy *Apple* Computing Master - Best Bu...
**707083BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Location Number:** 000045-Rockford-Store **Job Description:** **What does a Read more
Geek Squad *Apple* Master Consultation Agen...
**702908BR** **Job Title:** Geek Squad Apple Master Consultation Agent **Job Category:** Services/Installation/Repair **Location Number:** 000360-Williston-Store Read more
Best Buy *Apple* Computing Master - Best Bu...
**711023BR** **Job Title:** Best Buy Apple Computing Master **Job Category:** Sales **Location Number:** 000012-St Cloud-Store **Job Description:** **What does a Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.