TweetFollow Us on Twitter

Concurrent Programming With The Thread Manager

Concurrent Programming With The Thread Manager


Let us introduce you to the latest addition to the Macintosh Toolbox -- the Thread Manager. The Thread Manager enables concurrent programming so that you can provide true multitasking within your application. We give a quick overview of the Thread Manager and then move on to discuss advanced programming techniques not found in the Thread Manager documentation.

The Thread Manager is a new part of the Macintosh Toolbox that provides both cooperative and preemptive threads of execution within an application. Although it's available only within your application and is not used for systemwide preemption, you can take advantage of it in many valuable ways:

  • Use a threaded About box so that your application can continue running in the background while displaying a modal dialog.
  • Do anything you do today at idle time with null events within a thread. This avoids the complexity of writing idleProcs.
  • Decouple time-consuming processes from the user interface of your application. For example, create an image-rendering thread for each image to render, and use the main thread for the user interface of the application. Similarly, with graphics screen redraws and print spooling, have a thread do the redraw or spool a print job while the main thread handles the user interface.
  • Construct complex simulations without complex logic. For example, in a program that simulates city streets, use a thread for each car, one for each traffic signal, and one for the time of day.
  • Use threaded I/O and communication to easily allow an application to act as both a client and a server. With this approach, applications can handle incoming questions and wait for incoming answers simultaneously. Examples of this are discussed in more detail in "Threads on the Macintosh" indevelop Issue 6.

The Thread Manager has all the rights and privileges of other services in the Macintosh Toolbox, such as a trap interface to avoid linking a library into your code and header files for C, Pascal, and assembly-language programmers. It's a fully supported product and will be around for years to come. You can license the Thread Manager through Apple's Software Licensing group (AppleLink SW.LICENSE). The Thread Manager works on all Macintosh platforms running System 7 or later.


This section describes the two types of threads -- cooperative and preemptive -- and the basic services for creating, scheduling, and deleting threads and gathering thread status. It also discusses the main thread, code organization, and thread disposal.

Cooperative threads allow cooperative multitasking. They're the easiest to use in terms of scheduling and accessibility to Toolbox traps. Everything you can do today in a standard application you can do with a cooperative thread -- memory allocation, file I/O, QuickDraw, and so on. Cooperative threads yield to other cooperative threads only when the developer explicitly makes one of the Thread Manager yield calls or changes the state of the current cooperative thread.

Cooperative threading in the Thread Manager is similar to the cooperative threading in the Threads Package made available through APDA a few years ago (see "Threads on the Macintosh" indevelop Issue 6). In fact, this library should no longer be used since the Thread Manager is replacing it as the preferred method. Converting your applications from the Threads Package to the Thread Manager is easy as long as you don't rely heavily on the internal data structures provided by the Threads Package. The big advantage to using the Thread Manager is that thread stacks are register swapped, not block moved, during a context switch.

Preemptive  threads allow true multitasking at the application level. Whenever the application gets time from the Process Manager, preemptive threads for that application are allowed to run. Unlike cooperative threads, which execute only when a previously running cooperative thread explicitly allows it, preemptive threads may interrupt the currently executing thread at any time to resume execution. You can make the preemptive thread yield back to the just-preempted cooperative thread with any of the Thread Manager yield calls. Alternatively, a preemptive thread can simply wait for its time quantum to expire and automatically yield back to the cooperative thread it interrupted. If the interrupted cooperative thread is in the stopped state, the next available preemptive thread is made to run. Preemptive threads then preempt each other, in a round-robin fashion, until the interrupted cooperative thread is made ready. Figure 1 illustrates the default round-robin scheduling mechanism for threads.

For situations where you don't want a thread to be preempted, the Thread Manager provides two calls for turning off preemption (see the next section). These calls don't disable interrupts, just thread preemption.

Figure 1 Round-Robin Scheduling Mechanism Because a preemptive thread can usually "interrupt" cooperative threads and doesn't need to explicitly use the API to yield to other threads, preemptive threads have to conform to the guidelines set up for code executed at interrupt time. Don't make any calls that are listed inInside Macintosh X- Ref , Revised Edition, Appendix A, "Routines That Should Not Be Called From Within an Interrupt." No moving of memory is allowed and definitely no QuickDraw calls should be made. QuickDraw calls may seem tempting and may even appear to work, but they fail on many occasions and can corrupt other parts of memory in subtle ways that are very difficult to debug. (QuickDraw GX was designed to be reentrant, so preemptive threads may make use of the QuickDraw GX feature set if they follow the rules set up by QuickDraw GX.) If there's only one thing you learn in this article, make sure it's this:preemptive threads must follow interrupt-time rules!

There are several data types declared in the Thread Manager API that determine the characteristics of a thread. These include the type of thread you're dealing with (cooperative or preemptive), the state of a thread (running, ready, or stopped), and a set of options for creating new threads. With the thread creation options, you can create a thread in the stopped state (to prevent threads from beginning execution before you want them to), create a thread from a preallocated pool of threads (which is how you would create a new thread from a preemptive thread), or tell the scheduler not to save FPU state for the new thread (to reduce scheduling times for threads that don't use the FPU). These creation options are combined into one parameter and passed to the routines that create new threads.

General-purpose services make it possible to create a pool of preallocated threads and determine the number of free threads in the pool, get information on default thread stack sizes and the stack currently used by a thread, and create and delete threads.

There are basic scheduling routines for determining the currently running thread and for yielding to other threads. You can also use the preemptive scheduling routines -- ThreadBeginCritical and ThreadEndCritical -- to define critical sections of code. A critical section of code is a piece of code that should not be interrupted by preemptive threads -- because it's changing shared data, for example. The use of critical sections of code is needed to prevent interference from other threads and to ensure data coherency within your code. Note that preemptive threads run at the same hardware interrupt level as a normal application, andcalls to ThreadBeginCritical don't disable hardware interrupts; they simply disable thread preemption .

Advanced scheduling routines enable you to yield to specific threads and to get or set the state of nearly any thread. (You can't set a thread to the running state or change the state of the currently running thread if it's in a critical section of code.) Custom context-switching routines allow you to add to the default thread context and may be associated with any thread on a switch-in and/or switch- out basis. Any thread may have a custom context switcher for when it gets switched in and a different switcher for when it gets switched out. In addition, a custom scheduling procedure may be defined that gets called every time thread rescheduling occurs. All of these features may be used by both types of threads.

The Thread Manager also provides debugging support: a program or debugger can register callback routines with the Thread Manager so that it gets notified when a thread is created, deleted, or rescheduled.

When an application launches with the Thread Manager installed, the Thread Manager automatically defines the application entry point as the main cooperative thread. The main cooperative thread is commonly referred to as theapplication thread or main thread . There are several guidelines you should follow regarding the main thread. These aren't hard and fast rules, but just guidelines to keep you from having debugging nightmares. Remember that cooperative threads must make explicit use of the Thread Manager API to give time (yield) to other cooperative threads.

First, the Thread Manager assumes the main thread is the thread that handles the event mechanism (WaitNextEvent, GetNextEvent, ModalDialog, and so on). Events that can cause your application to quit should be handled by the main thread: the application was entered through the main thread andshould exit through it as well. The Thread Manager schedules the main thread whenever a generic yield call is made and an OS event (such as a key press or mouse click) is pending. This is done to speed up user-event handling; otherwise, it could take a long time before the main thread got time to run, because of the round-robin scheduling mechanism used for cooperative threads. In general, all event handling should be done from the main thread to prevent event-handling confusion. For example, if the main thread calls WaitNextEvent while another thread is calling GetNextEvent while yet another thread is calling ModalDialog, and they're all yielding to each other, sorting out which event belongs to which thread becomes a nightmare. Just let the main thread handle all events. Your application will run faster and work better in the long run.

The second guideline is to avoid putting the main thread in a stopped state. Doing so is perfectly legal but can lead to some exciting debugging if your application makes incorrect assumptions about the state of the main thread.

Last but not least, be sure you call MaxApplZone from the main thread to fully extend your application heap before any other cooperative threads get a chance to allocate, or move, memory. This requirement is due to the limitation on cooperative threads extending the application heap -- they can't.

When threads finish executing their code, the Thread Manager calls DisposeThread. Preemptive threads are recycled to avoid moving memory. Recycling a thread causes the Thread Manager to clear out the internal data structure, reset it, and place the thread in the proper thread pool. (There are two pools, one for cooperative and one for preemptive threads.) Since recycling a thread doesn't move memory, preemptive threads can dispose of themselves and other threads safely.

The Thread Manager handles disposing of threads automatically, so it's not necessary for the last line of your code to call DisposeThread unless you want to -- for example, to recycle all terminating cooperative threads. DisposeThread takes three parameters: the thread ID of the thread to be disposed of, a return value to return to the creator of the thread, and a Boolean flag that tells the Thread Manager whether or not to recycle the thread. A preemptive thread should only call DisposeThread with the recycle flag set to true.

The Thread Manager API also defines a routine, SetThreadTerminator, that allows your application to install a callback routine to be called when a thread terminates -- which is when it's disposed of. You could use SetThreadTerminator to do any cleanup needed by the application, but remember, you can't move memory during termination of a preemptive thread because you're still in the preemptive state.

When your application terminates, threads are terminated as follows:

  • Stopped and ready threads are terminated first but in no special order.
  • The running thread, which should be the main thread, is always terminated last.

To use the Thread Manager most effectively, break your applications into discrete functional pieces, similar to the code organization used for object-oriented applications. Keep the code for event handling, window management, calculation, and drawing separate. In general, design your code such that the discrete parts may run independently of each other, but in an organized and coherent way. Object-oriented code, in general, is designed this way and is much easier to think about in a concurrent manner. The following sections discuss techniques that you can use to write more effective thread code. The examples illustrate what we learned from lots of trial and error during the development of the Thread Manager, which should reduce the development time for your threaded applications.

The return value has been set by the time a thread termination routine is executed. In this way, a piece of code may be notified when the return result of a terminated thread becomes valid. There's more information on thread termination routines in the Thread Manager documentation.*


When creating a thread, you can pass in both a thread input parameter and a return value storage location. The Thread Manager defines the input parameter as a void* and the return parameter as avoid**. Don't let the messy C-language semantics get you down; it's actually quite easy to understand.

The Thread Manager assumes the input parameter is the size of a void* (a 32-bit long word for today's 680x0 applications) and is passed to your thread as such. Any value may be passed as the input parameter, as long as it's the size of a void*. Passing nil as this parameter will simply pass nil -- not nothing -- as your thread's input parameter.

The return parameter is a little messier. In asking for a void**, the Thread Manager is asking for the memory location to store the void* returned by the thread. If nil is passed as the return value storage location, the Thread Manager assumes there's no return value and won't bother to set it on thread completion. Your thread may return any value as long as it's thesize  of a void*. The address passed in as the return value storage location can be simply the address of a long-word local variable (a long word is the size of a void*) or can be as complicated as the address of a global variable record pointer. The idea is that the Thread Manager wants, as the return value storage location, the address in which to store a value the size of a void*. The Thread Manager stores the returned value at thread termination time by using either a return (x) statement or a DisposeThread call.

Don't pass the address of a short-word local variable as the return value storage location, because a short word is shorter than a void*. When the thread terminates, the Thread Manager will slam all 32 bits of the return value (the size of a void*) into the short word, destroying the high word of your next defined variable. You must also make sure the storage location used for the return parameter is valid at the time the thread terminates. For example, if you use a local variable as the storage location, you need to be sure the new thread will terminate before you return from the routine that created it (that is, before the local variable goes out of scope).

The following code samples show two methods of sending in thread parameters and returning thread results. First let's define some constants and the record structure used in the example:

#define kNoCreationOptions      0 /* Just use the standard default */
                                  /* creation options.  */
#define kDefaultThreadStackSize 0 /* Zero tells the Thread Manager */
                                  /* to use the default value.  */

struct ExampleRecord {
    long someLongValue;
    short someShortValue;
typedef struct ExampleRecord ExampleRecord;
typedef ExampleRecord *ExampleRecordPtr;

The kNoCreationOptions #define specifies the default creation options. These options create a thread using newly allocated memory from the Memory Manager with the thread in the "ready" state; the thread will have its FPU context switched during a reschedule. The kDefaultThreadStackSize #define tells the Thread Manager to use the default stack size for the thread.

Now let's look at the routine prototypes and thread parameters:

pascal long ExampleOne (long);
pascal ExampleRecordPtr ExampleTwo
                 (ExampleRecordPtr inputRecordParam);

void ParametersExample (void)
    ThreadID tempThreadID;
    OSErr err;
    long myLong;
    short myShort; Boolean notDone = true;
    long longResult = -1;
    ExampleRecordPtr recordOutResult = nil;
    ExampleRecord recordInParam;

In the call to create the first thread, the numeric value 42 is passed in as the input parameter. The return value storage location is the address of a long-word local variable. Remember, you can't return from this function until the new thread terminates -- the local variable return value storage must stay valid.

    err = NewThread(kCooperativeThread, (ThreadEntryProcPtr)(ExampleOne),
        (void*)42, kDefaultThreadStackSize, kNoCreationOptions,
        (void**)&longResult, &tempThreadID);
    if (err)
        DebugStr("\p Could not make coop thread 1");

To create the second thread, the address of a locally allocated data structure is passed as the input parameter. The return value storage location is the address of a local variable used to hold a pointer to the type of data structure to be used for storing the return value. Again, you can't return from this function until the new thread terminates.

    recordInParam.someLongValue = 0xDEADBEEF;
    recordInParam.someShortValue = 0xBADD;
    err = NewThread(kCooperativeThread, (ThreadEntryProcPtr)(ExampleTwo),
        (void*)&recordInParam, kDefaultThreadStackSize, kNoCreationOptions,
        (void**)&recordOutResult, &tempThreadID);
    if (err)
        DebugStr("\p Could not make coop thread 2");

Now that the two threads are created and ready to run, the code sits in a loop handling user events, yielding, and waiting for the threads to complete their work.

    while (notDone)
        YieldToAnyThread();     /* Other threads run. */

This code looks to see whether the first thread has completed and, if it has, goes off and does what computers do best -- compute on the data.

        if (longResult != -1)
            longResult = -1; /* Reset the value. */

Now the code checks to see whether the second thread has completed. If there's a non-nil value in recordOutResult, the data is available. It's then sucked out of the record into the local variables and sent on its way to be used by the application. Notice that the record structure that was allocated by the second thread is disposed of.

        if (recordOutResult != nil)
            myLong = recordOutResult->someLongValue;
            myShort = recordOutResult->someShortValue;
            DoStuffWithParams(myLong, myShort);
            DisposePtr((Ptr)recordOutResult);    /* Toss it. */
            recordOutResult = nil;               /* Neutralize it. */
        /* Handle user events until we quit. */
                                  /* WaitNextEvent event handling. */
    return;                             /* Out of here. */

In the code for the first thread, both the input and output parameters are longs, and the thread simply returns the value sent to it. The important point here is that both the input and output parameters are the size of a void*.

pascal long ExampleOne (long inputParam)
    return (inputParam); /* Must be the size of a void*. */

The code for the second thread is a little more complex. Here, we allocate the storage needed for the record that will be passed back to the creator. It's the creator's duty to dispose of the data after using it. The record elements from the input parameter are used as the source material for the elements within the record being returned to the creator. Again, both the input and output parameters are the size of a void*.

pascal ExampleRecordPtr ExampleTwo
                     (ExampleRecordPtr inputRecordParam)
    ExampleRecordPtr myRecordPtr;

    myRecordPtr = NewPtr(sizeof(ExampleRecord));
    myRecordPtr->someLongValue = inputRecordParam->someLongValue;
    myRecordPtr->someShortValue = inputRecordParam->someShortValue;

    return (myRecordPtr);   /* Must be the size of a void*. */


If a preemptive thread can preempt, it will preempt. This can cause problems, especially when you create new preemptive threads. When you create a preemptive thread in the ready state, it's free to run whenever preemption occurs. This could mean that your preemptive thread fires off before data it might need is available or set up. There are two simple solutions, illustrated in the examples that follow: create the preemptive thread in the stopped state and wake it up when you're ready to let it run, as shown in the first example, or wrap all creation of "ready" preemptive threads within critical sections, as shown in the second example. Remember that preemptive threads can't preempt code that's wrapped within critical sections.

Here's the example of creating a preemptive thread in the stopped state:

pascal void* aThread (void* parameter)
    /* Preemptive threads don't need to call Yield. */
    while (true); /* Infinite loop. */

void somefunction (void)
    ThreadID theThreadID;
    OSErr theError;

    theError = NewThread(kPreemptiveThread,  /* Type of thread */ 
                    aThread,                 /* Thread entry point */
                    nil,                     /* Input parameter */
                    kDefaultThreadStackSize, /* Stack size */
                    kNewSuspend,             /* Creation options */
                    nil,                     /* Return result */
                    &theThreadID);       /* New thread ID */
    if (theError != noErr)
        DebugStr("\pFailed to create thread");
    . . .
    /* Now wake the thread up. */
    theError = SetThreadState(theThreadID,   /* Thread to set */
                    kReadyThreadState,       /* New state */
                    kNoThreadID);            /* Suggested thread */
    if (theError) != noErr
        DebugStr("\pFailed to set the preemptive thread to the ready 

The parameter kNewSuspend in the NewThread call tells the Thread Manager to create the thread in the stopped state. The SetThreadState call is used to wake up the thread. The last parameter to SetThreadState suggests to the Thread Manager which thread to execute after this call; this parameter is used only if the state of the currently executing thread is being changed. At this point, the preemptive thread is allowed to begin execution whenever it can.

Here's how to create a preemptive thread within a critical section:

pascal void* aThread (void *parameter)
    /* Preemptive threads don't need to call Yield. */
    while (true); /* Infinite loop. */

void somefunction (void)
    ThreadID theThreadID;

    ThreadBeginCritical();      /* Disable preemption. */

    theError = NewThread(kPreemptiveThread, aThread, nil,
        kDefaultThreadStackSize, kNoCreationOptions, nil,
    if (theError != noErr)
        DebugStr("\pFailed to create a preemptive thread");

    ThreadEndCritical();        /* Enable preemption. */

As mentioned earlier, you can't call QuickDraw from preemptive threads because QuickDraw isn't interrupt safe and you have to obey the rules of executing during interrupt time when you use preemptive threads. There's no way around this, but youcan draw from preemptive threads with some extra work.

First you need to write your own primitives for drawing. This can be as simple as blasting pixels with *(pixelPtr) = 0xFFFF or as complex as writing your own primitives for all drawing. Next you create a GWorld for your preemptive thread to draw into. The idea is to modify this GWorld and then later use CopyBits from a cooperative thread to blast it to the screen. There are just a couple of things to remember before you start using the preemptive thread's GWorld: make sure you lock down the PixMap handle within the GWorld using HLock and make sure you call LockPixels for that GWorld. This guarantees there won't be any memory moving while you're drawing into the GWorld with preemptive threads.


This section provides code examples for creating your own scheduler and context-switching routines. Figure 2 shows how your custom scheduler and custom context-switching routines are executed in conjunction with the Thread Manager's own scheduling routines.

Figure 2 Thread Scheduling With Custom Scheduler and Context Switcher

Occasionally, the YieldToThread(ThreadID) call is insufficient as a thread-scheduling mechanism. Assigning a custom scheduler function gives localized control over thread scheduling within your application. From this function you can inform the Thread Manager which thread you would like to schedule. Here's the header information that deals with custom schedulers (it's extracted from Threads.h):

/* Information supplied to the custom scheduler */
struct SchedulerInfoRec {
    unsigned long   InfoRecSize;
    ThreadID        CurrentThreadID;
    ThreadID        SuggestedThreadID;
    ThreadID        InterruptedCoopThreadID;
typedef struct SchedulerInfoRec SchedulerInfoRec;
typedef SchedulerInfoRec *SchedulerInfoRecPtr;

typedef pascal ThreadID (*ThreadSchedulerProcPtr)(SchedulerInfoRecPtr

Note that the Thread Manager passes the custom scheduler the ID of the current thread (CurrentThreadID) and the ID of the thread that the Thread Manager is going to schedule (SuggestedThreadID). If a cooperative thread was preempted and has not yet resumed execution, the ID of that thread (InterruptedCoopThreadID) is passed to the custom scheduler; kNoThreadID is passed if there's no cooperative thread waiting to resume from being preempted. With this information, all you have to do is tell the Thread Manager which thread to execute next by returning the thread ID of the thread you want to run.

There's one rule you must follow when returning a thread ID: if the value of InterruptedCoopThreadID is not equal to 0, return the InterruptedCoopThreadID value or the ID of any ready preemptive thread. This is because scheduling a different cooperative thread while another cooperative thread has been preempted would cause cooperative thread preemption and could result in a system misunderstanding (crash). If you don't care which thread the Thread Manager schedules next, you can just return the constant kNoThreadID. If the value of CurrentThreadID is kNoThreadID, the Thread Manager schedules the first available ready thread by default; your custom scheduler may override this.

During the execution of a custom scheduler, certain conditions exist: preemption is disabled to take care of any reentrancy problems and your A5 world is not guaranteed to be valid. You're probably thinking, "Geez, I have to worry about A5!" We show you a quick way to get around that in the example below, by using Gestalt to store A5. A few more things about custom schedulers: You can't yield from within a custom scheduler, nor can you cause scheduling to recur from this function. Also, only ready and running threads are valid for rescheduling -- and you can't call SetThreadState from the custom scheduler.

OK, enough background -- here's the custom scheduler example:

#include "GestaltValue.h"     /* Gestalt utility. */

pascal ThreadID myThreadScheduler
                            (SchedulerInfoRecPtr mySchedulerInfo)
    long currentA5,  myA5;
    ThreadTaskRef    currentTaskRef;

    /* The task ref is our Gestalt selector. */
    /* Get application's A5. If we can't, let Thread Manager do it */
    /* all. */
    if (Gestalt(currentTaskRef, &myA5) != noErr)
        return kNoThreadID;
    /* Was a cooperative thread preempted? If so, let Thread */
    /* Manager continue. */
    if (mySchedulerInfo->InterruptedCoopThreadID != kNoThreadID)
    return mySchedulerInfo->InterruptedCoopThreadID;
    /* Restore application's A5. */
    currentA5 = SetA5(myA5);
    /* Now you can determine what you want to do. You have access */
    /* to all your globals, so select a thread to run. */
    . . .
    /* Restore the A5 we entered with. */
    myA5 = SetA5(currentA5);

void InitAll (void)
    long myA5;
    ThreadTaskRef currentTaskRef;
    OSErr myError;
    /* Do standard initialization stuff here. */
    . . .
    myA5 = SetCurrentA5();
    /* Get a unique value to use as a gestalt selector. */
    /* Set up a Gestalt value to use. */
    if ((myError = NewGestaltValue(currentTaskRef, myA5)) != noErr)
        /* Does it already exist? It better not! */
        if (myError == gestaltDupSelectorErr)
            DebugStr("\pWon't replace Gestalt selector.");

Now we come to the next feature the Thread Manager supplies for dealing with scheduling: custom context switchers. You might ask, what is a thread context? The default context of a thread consists of the CPU registers, the FPU registers if an FPU is present, and a few internal globals. The saved data is as follows:

  • CPU registers: D0-D7; A0-A7; SR (including CCR)
  • FPU registers: FPCR, FPSR, FPIAR; FP0-FP7

The thread context lives on the thread's A7 stack, and the location of the thread context is saved at context switch time. Initially, the A5 register (which contains a pointer to the application's A5 world) and the thread MMU mode (24-bit or 32-bit) is set to be the same as the main thread. This allows all threads to share in the use of the application's A5 world, which gives threads access to open files and resource chains, for example. To allow preemption of threads that change the MMU operating mode, the MMU mode is saved as part of the context of a thread. The FPU context is fully saved along with the current FPU frame.

Custom context switchers don't need to worry about saving the standard CPU context, as this is done by the Thread Manager. When writing a custom context switcher, keep in mind that preemption is disabled while it executes. Just as in custom schedulers, don't make any calls that can cause scheduling. In addition, when the custom context switcher is being called, the thread context is in a transition state, so any calls to GetCurrentThread won't work, nor will any calls to which you pass kCurrentThreadID as a parameter. As with the custom scheduler, you're not guaranteed to have A5 set up for you; the example below shows how to get around that.

You may have context switchers for when a thread is entered (switcher-inner ) and when a thread is exited (switcher-outer ). Which context switcher to use is determined by a parameter passed to the SetThreadSwitcher routine. Here's the header information on custom context switchers (extracted from Threads.h):

typedef pascal void (*ThreadSwitchProcPtr)(ThreadID threadBeingSwitched, 
    void *switchProcParam);

pascal OSErr SetThreadSwitcher (ThreadID thread, ThreadSwitchProcPtr 
    threadSwitcher, void *switchProcParam, Boolean inOrOut);

Besides the selector for whether the switcher is an inner or an outer, the application can supply a parameter to the switch function. This parameter may vary for every thread, allowing you to write only one custom context switcher. It isn't necessary to have a switcher for both entry and exit, and all threads can share the same switcher. One last thing to remember about switchers is that a switcher- inner is called immediately before the thread begins execution at the entry point.

Here's an example of a custom context switcher:

#define switcherInner true
#define switcherOuter false

struct myContextSwitchParamStruct
    long appsA5; /* Save application's A5. */
    /* Anything else you may need for your custom context switch. */
    . . .
typedef struct myContextSwitchParamStruct myContextSwitchParamStruct;
struct myContextSwitchParamStruct gMyContextSwitchParam;

pascal void* aThread (void *parameter)
    /* Does something. */
    . . .

pascal void myThreadSwitchProc (ThreadID theThreadBeingSwitched,
void *theSwitchProcParam)
    long currentA5, myA5;
                       /* A5 when our custom switcher was called. */
    myA5 = 
        ((myContextSwitchParamStruct *)theSwitchProcParam)->appsA5;
    /* Restore application's A5. */
    currentA5 = SetA5(myA5);
    /* Now you can determine what you want to do. You have access */
    /* to all your globals, so do any context stuff. */
    . . .
    /* Restore the A5 we entered with. */
    myA5 = SetA5(currentA5);

void InitAll (void)
    ThreadID theThreadID;
    OSErr theError;
    /* Do standard initialization stuff here. */
    . . .
    /* Set up A5 in switch parameter. */
    gMyContextSwitchParam.appsA5 = SetCurrentA5();
    /* Create a thread. */
    theError = NewThread(kCooperativeThread, aThread, nil, 
        kDefaultThreadStackSize, kNoCreationOptions, nil,
    if (theError != noErr)
        DebugStr("\pFailed to create a cooperative thread");
    theError = SetThreadSwitcher(theThreadID, myThreadSwitchProc, 
        (void*)&gMyContextSwitchParam, switchInner);
    if (theError != noErr)
        DebugStr("\pFailed to set custom context switcher-inner");
    . . .


Aren't you tired of having your dialogs hang up your application while you wait for the user to do something? With the Thread Manager you can alleviate this problem by making only one call, YieldToAnyThread. Basically, if your program is broken into multiple threads, you can put the dialog handler in one of those threads (usually the main thread is best) and have the dialog's filter procedure call YieldToAnyThread. This gives any other threads that are waiting time to run. When the user makes a choice in the dialog, the main thread is scheduled automatically by the Thread Manager so that your application can handle that event immediately. While the user is getting a cup of coffee, your application can finish whatever other tasks are appropriate, without slowing the machine down.

In the following example, YieldFilter is a filter procedure for a dialog that just calls YieldToAnyThread, to give other threads time while the dialog is in the front. This allows threads "behind" the dialog to continue to process information.

pascal boolean YieldFilter (DialogPtr theDialogPtr,
    EventRecord *theEvent, short *theItemHit)
    /* Yield to whoever wants to run. */
    /* Call the 7.0 standard filter procedure defined in */
    /* Dialogs.h. */
    return (StdFilterProc(theDialogPtr, theEvent, theItemHit));

/* The DoOKDialog function just handles a simple OK dialog. */

void DoOKDialog (short dialogID)
    DialogPtr   theDialog;
    short       itemHit;
    GrafPtr     savePort;
    OSErr       theError;   
    if ((theDialog = GetNewDialog(dialogID, NULL, (Ptr)-1)) != NULL)
            ModalDialog(YieldFilter, &itemHit);
            } while (itemHit != okButton);
    } else
        DebugStr("\pCould not find dialog");


In general, thread-blocking I/O occurs when code making an I/O call sleeps until the I/O call completes. The basic problem with doing thread-blocking I/O with the Thread Manager is that threads are application based, not systemwide Device Manager I/O based. This means that threads are really good at doing work at the application level but aren't designed to auto-block on I/O -- that's your job. Fortunately, the Thread Manager provides all the tools needed to create your own thread-blocking I/O.

Let's suppose you use a thread to make an asynchronous I/O call. Then the thread goes to sleep, waiting for the completion routine to wake it up. The problem is the completion routine can (and will) fire off before the thread is able to be put to sleep -- there's a window of misfortune after the thread makes the asynchronous call and before it completes the sleep call. Having nothing to do, the completion call just returns. The thread then makes the sleep call and will sleep forever, waiting for a completion routine that already occurred.

A completion routine, or any other code running on the Macintosh, may ask for the state of a thread in an application by using GetThreadStateGivenTaskRef. Given a task reference to a particular application and a thread ID, you can get the state of any thread. If that thread is sleeping, you can call SetThreadReadyGivenTaskRef, which will tell the Thread Manager to mark the thread as ready. The thread is not actuallymade ready, justmarked ready. The next time a reschedule occurs in the application, the marked thread ismade  ready and is eligible to run.

Note that you can't just check to see if the thread isn't in the running state because it could have been preempted (and probably was if possible) before it made the sleep call, when the completion routine fired. You must wait for the thread to be in the stopped state before making a call to SetThreadReadyGivenTaskRef.

One solution is to have the completion routine use one of the interrupt-safe routines and ask the Thread Manager if the thread in question is sleeping yet and, if it is, ask the Thread Manager to wake it up. If it's not sleeping yet, set up a timer task (or VBL or Deferred Task Manager task) to ask again later, and keep asking until the thread is sleeping; then wake it up.

As you can imagine, the "poll until thread stopped" solution is messy and time consuming. A cleaner solution is to have a second thread whose only job in life is to wake up the first thread after it goes to sleep (after making the asynchronous I/O call). The following steps show how to do this for the two threads ThreadA and ThreadB.

From a cooperative thread -- ThreadA:

  1. Create a cooperative thread, ThreadB, in the stopped state.
  2. Set the completion routine to wake up ThreadB when it fires off.
  3. Make the asynchronous I/O call from ThreadA.
  4. Put ThreadA to sleep, forcing a reschedule with the SetThreadState call.
  5. After ThreadB wakes up ThreadA, ThreadA magically continues running right where it left off! This is what's fun with concurrent programming.

From the completion routine:

  1. Be safe and make the GetThreadStateGivenTaskRef call on ThreadB.
  2. If ThreadB isnot  in a stopped state, give up. Things are in a bad way. ThreadB should be in the stopped state, since it was created that way.
  3. Make a call to SetThreadReadyGivenTaskRef on ThreadB tomark  it ready. The Thread Manager will actuallymake  it ready at the next reschedule time.
  4. That's it; just return. While executing code from the cooperative thread, ThreadB, you know the following to be true:
    • ThreadB is cooperative.
    • You're executing code in ThreadB.
    • ThreadA is cooperative.
    • Only one cooperative thread may run at a time.
    • ThreadA didn't yield to anybody and is therefore not in the ready state while ThreadB is running.
    • ThreadA put itself in the stopped state, which caused a reschedule.
    • Since cooperative ThreadB is running, ThreadA can't be running.
    • Therefore, ThreadA is in the stopped state.

From the above truths, all ThreadB needs to do is set the thread state of ThreadA to ready. The following steps wake up ThreadA from ThreadB:

  1. Set the state of ThreadA to ready with the SetThreadState call.
  2. Return.

The big concept is that only one cooperative thread can run at a time. Cooperative threads can't preempt each other. The only way to get from one cooperative thread to another is by yielding -- making a yield call or setting the state of the running cooperative thread to ready or stopped. If a cooperative thread, ThreadA, sets itself to stopped, another cooperative thread, ThreadB, knows that because it (ThreadB) is running, ThreadA must be stopped. However, this scheme works only if there are other (at least one) cooperative or preemptive threads that can run while the wake-up thread and the thread making the I/O call are stopped. It's highly recommended that you never stop the main thread; this will keep you safe for doing thread-blocking I/O with a thread making an I/O call and a wake-up thread. Keeping the main thread ready also keeps the Macintosh user interface active. To summarize the preceding steps: The cooperative thread doing the I/O creates a cooperative wake- up thread (in the stopped state), makes an asynchronous I/O call, and tells the Thread Manager to put itself in the stopped state. The completion routine fires off any time after the I/O call and makes a call to mark the wake-up thread as ready. Once the thread that made the I/O call goes to sleep, rescheduling occurs and, if the wake-up thread is ready, it's made eligible for running. Normal thread scheduling occurs until the wake-up thread is run. The only thing the wake-up thread needs to do is tell the Thread Manager to set the state of the thread making the I/O call to ready and return. Rescheduling will occur and the thread that made the I/O call will continue on its merry way as if nothing had happened. This process is illustrated in Figure 3.

[IMAGE Anderson_Post_final_REV4.GIF]

Figure 3 Timeline State Flow Diagram for Threaded I/O

Now let's see how the preceding solution looks in code. We begin by setting up housekeeping and doing some administrative stuff. The extended parameter block structure is used to store the parameter block used by the file system as well as data used by the completion routine. The first element of the structure must be the file system parameter block, as this is the address passed into the file system call. The next two parameters are used by the completion routine to get the application task reference and thread ID of the thread to wake up. These values are stored here because completion routines can't access the application globals when they're called.

To finish up the housekeeping, we define the routine prototypes and the inline routine GetPBPtr. Completion routines are passed the address of the parameter block in register A0, so the GetPBPtr routine is needed to retrieve the parameter block.

struct ExtendedParamBlk {
    /* PB must be first so that the file system can get the data. */
    ParamBlockRec pb;
    ThreadTaskRef theAppTask;
    ThreadID theThread;
typedef struct ExtendedParamBlk ExtendedParamBlk;
typedef ExtendedParamBlk *ExtendedParamBlkPtr;

/* Routine prototypes. */
pascal void IOExampleThread (void);
pascal void WakeUpThread (ThreadID threadToWake);
void MyCompletionRoutine (void);

/* Completion routines are called with register A0 pointing to */ 
/* the parameter block. */
pascal ExtendedParamBlkPtr GetPBPtr(void) = {0x2E88};
                            /* move.l a0, (sp) */

This is a routine in the main thread that creates a thread that makes an I/O call:

void KickOffAnIOThread (void)
    ThreadID    newCoopID;
    OSErr       theError;

    theError = NewThread(kCooperativeThread, 
        (ThreadEntryProcPtr)IOExampleThread, nil,
        kDefaultThreadStackSize, kNoCreationOptions, nil,
    if (theError)
        DebugStr("\p Could not make cooperative I/O thread");
    /* Return and let the I/O thread do its thing! */
Below is the code for the thread that makes the I/O call -- IOExampleThread. It makes an asynchronous I/O call with a completion routine that will wake up the wake-up thread, which then wakes up IOExampleThread.
pascal void IOExampleThread (void)
    ThreadID            wakeupThreadID, meThreadID;
    ThreadTaskRef       theAppRef;
    ExtendedParamBlk    myAsyncPB;
    OSErr               theError, theIOResult;

    /* Get the ID of IOExampleThread. */
    theError = GetCurrentThreadID(&meThreadID);
    if (theError != noErr)
        DebugStr("\pFailed to get the current thread ID");

    /* Get the application's task reference. */
    theError = GetThreadCurrentTaskRef(&theAppRef);
    if (theError != noErr)
        DebugStr("\Could not get our task ref");
    /* Create a wake-up thread. */
    theError = NewThread(kCooperativeThread,
        (ThreadEntryProcPtr)WakeUpThread, (void*)meThreadID,
        kDefaultThreadStackSize, kNewSuspend, nil, &wakeupThreadID);
    if (theError != noErr)
        DebugStr("\pFailed to create a cooperative thread");

Here's where you prepare for the I/O call -- a simple asynchronous flush volume command. Notice how we set the address of the completion routine. We also set up the extended data needed by the completion routine -- the thread ID of the wake-up thread and the application's task reference.

    myAsyncPB.pb.ioParam.ioCompletion = (ProcPtr)MyCompletionRoutine;
    myAsyncPB.pb.ioParam.ioResult = 0;   /* Initialize the result. */
    myAsyncPB.pb.ioParam.ioNamePtr = nil;    /* No name used here. */
    myAsyncPB.pb.ioParam.ioVRefNum = -1;     /* The boot drive. */
    myAsyncPB.theThread = wakeupThreadID;
    myAsyncPB.theAppTask = theAppRef;

IOExampleThread makes the I/O call and then calls SetThreadState to put itself to sleep. The first two parameters to SetThreadState indicate the thread to set, which is IOExampleThread, and the state to set it to -- stopped. The kNoThreadID parameter indicates that any ready thread can run next.

    PBFlushVol((ParmBlkPtr)&myAsyncPB, async);
    theError = SetThreadState(kCurrentThreadID, kStoppedThreadState,
    if (theError != noErr)
        DebugStr ("\pFailed to put ourselves to sleep");

At this point, IOExampleThread is sleeping, but other threads are running (including the main thread, because it's not nice to put it in the stopped state). Meanwhile, thread scheduling is taking place, so when the completion routine executes and tells the scheduler to place the wake-up thread in the ready queue, the wake-up thread can get scheduled to execute. (Make sure the main thread doesn't quit the application with the asynchronous I/O pending. You could run into problems when the completion routine tries to run but no longer exists because the application is gone.)

Next the completion routine fires off and tells the Thread Manager to ready the wake-up thread. The wake-up thread eventually runs and tells the Thread Manager to ready the I/O thread. Then theI/O thread awakes and continues running as if nothing happened, continuing with the rest of the code.

    theIOResult = myAsyncPB.pb.ioParam.ioResult;
    . . .

void MyCompletionRoutine (void)
    ExtendedParamBlkPtr myAsyncPBPtr;
    ThreadTaskRef       theAppTaskRef;
    ThreadID            theThreadID;
    ThreadState         theThreadState;
    OSErr               theError;
    /* Get the parameter block. */
    myAsyncPBPtr = GetPBPtr();
    /* Get the data. */
    theAppTaskRef = myAsyncPBPtr->theAppTask;
    theThreadID = myAsyncPBPtr->theThread;
    /* See if the thread is stopped yet - just to be sure. */
    theError = GetThreadStateGivenTaskRef(theAppTaskRef, theThreadID,
    /* If we can get the thread state, go for it! */
    if (theError == noErr)
        /* If it's awake, we have problems. */
        if (theThreadState != kStoppedThreadState)
            DebugStr("\pWake-up thread is in the wrong state!");
        /* Should be sleeping, mark it for wake up! */
            SetThreadReadyGivenTaskRef(theAppTaskRef, theThreadID);

The wake-up thread eventually begins execution and has only one job -- to wake up the thread that made the I/O call.

pascal void WakeUpThread (ThreadID threadToWake)
    OSErr   theError;

    /* Wake up the specified thread. */
    theError = SetThreadState(threadToWake, kReadyThreadState, 
    if (theError != noErr)
        DebugStr("\pFailed to wake our thread");
    /* We've done our deed, so just return quietly and let it run. */

Things get a little tricky when the thread making the I/O call is preemptive -- not to mention that you may not be allowed to make certain asynchronous I/O calls from preemptive threads (you know, the interrupt routine rules and all that). To solve the problem, all you do is force your preemptive thread to look like a cooperative thread. Before you make the asynchronous I/O call, you need to begin a critical sectionwith the ThreadBeginCritical routine. Also, since you can't create threads from preemptive threads (again, the interrupt routine rules), you need to get the wake-up thread from the thread pool you created earlier (you did create one, didn't you?). After the I/O call, call SetThreadStateEndCritical rather than SetThreadState; this puts the thread in the stopped state, ends the critical section to allow preemptive scheduling, and forces a reschedule all at the same time. Then, when the wake-up thread gets run, it knows that the thread that made the I/O call must be sleeping.


Here are some final thoughts before you dive in and start programming with the Thread Manager:
  • Remember to always preload the code segments that will be used by preemptive threads. Since you're not allowed to move memory during preemptive thread time, loading a code segment would definitely cause a problem.
  • Make sure you call MaxApplZone during the application's initialization, especially before you start creating threads. The application's heap won't grow correctly from other cooperative threads, so you must fully grow your heap before any other thread allocates memory.
  • When dealing with cooperative and preemptive threads in the same application, make sure you maintain data coherency between your threads. It's very possible that a preemptive thread could change shared data out from underneath a cooperative thread that's using it. A simple way to maintain data coherency is to use critical sections.
  • Be careful calling WaitNextEvent with a large sleep value when there are threads that need time. Threads get time to run only when your application gets time. Putting the application to sleep with WaitNextEvent means that your threads sleep, too.
  • Be very careful when quitting an application with suspended threads that will be awakened by an interrupt service routine. This can be a problem in some cases. The Thread Manager provides a thread termination procedure that's called when a thread is about to be disposed of -- such as when the application quits -- to handle any cleanup needed before final application termination.

We urge you to use the Thread Manager because it will be integrated directly into the system software, and it will be upwardly compatible with the new RISC and OS directions Apple is taking. If you start taking advantage of the Thread Manager now, you'll only be more ahead in the future.

ERIC ANDERSON has been developing various parts of the Macintosh Toolbox and OS for over five years. Having worked on System 7 virtual memory for the past four years and the Thread Manager for the past two, he thinks that moving to Hawaii and building boats is an excellent idea. Before Apple, he designed tower and street crane-positioning simulation software and developed various software/hardware systems for controlling live-action effects (read: pyrotechnics) for film productions.*

BRAD POST (AppleLink BPOST) is a member of SMMFD (a geek club for mathematical modeling and fractal design). His other hobbies include computer graphics, skiing, surfing, playing Ultimate Frisbee, drinking Tied House Ale, working out, and just living life to its fullest. Remember, no one gets outta here alive! *

The GestaltValue library, available on this issue's CD, provides the NewGestaltValue, ReplaceGestaltValue, and DeleteGestaltValue functions.*

For more information on completion routines, parameter blocks, and calling routines asynchronously in general, see "Asynchronous Routines on the Macintosh" in develop  Issue 13.*

THANKS TO OUR TECHNICAL REVIEWERSDave Falkenburg, Michael Gough, C. K. Haun, John Yen *


Community Search:
MacTech Search:

Software Updates via MacUpdate

FontExplorer X Pro 7.1.3 - Font manageme...
FontExplorer X Pro is optimized for professional use; it's the solution that gives you the power you need to manage all your fonts. Now you can more easily manage, activate and organize your... Read more
DiskCatalogMaker 8.2.5 - Catalog your di...
DiskCatalogMaker is a simple disk management tool which catalogs disks. Simple, light-weight, and fast Finder-like intuitive look and feel Super-fast search algorithm Can compress catalog data for... Read more
Skim 1.5.12 - PDF reader and note-taker...
Skim is a PDF reader and note-taker for OS X. It is designed to help you read and annotate scientific papers in PDF, but is also great for viewing any PDF file. Skim includes many features and has a... Read more
rekordbox - Professional DJ m...
rekordbox is the best way of preparing and managing your tracks, be it at home, in the studio, or even on the plane! It allows you to import music from other music-management software using the... Read more
iExplorer 4.4.0 - View and transfer file...
iExplorer is an iPhone browser for Mac lets you view the files on your iOS device. By using a drag and drop interface, you can quickly copy files and folders between your Mac and your iPhone or... Read more
OmniGraffle 7.17.5 - Create diagrams, fl...
OmniGraffle helps you draw beautiful diagrams, family trees, flow charts, org charts, layouts, and (mathematically speaking) any other directed or non-directed graphs. We've had people use Graffle to... Read more
Apple Configurator 2.13.1 - Configure an...
Apple Configurator makes it easy to deploy iPad, iPhone, iPod touch, and Apple TV devices in your school or business. Use Apple Configurator to quickly configure large numbers of devices connected to... Read more
OmniGraffle Pro 7.17.5 - Create diagrams...
OmniGraffle Pro helps you draw beautiful diagrams, family trees, flow charts, org charts, layouts, and (mathematically speaking) any other directed or non-directed graphs. We've had people use... Read more
FoldersSynchronizer 5.1.6 - Synchronize...
FoldersSynchronizer is a popular and useful utility that synchronizes and backs-up files, folders, disks and boot disks. On each session you can apply special options like Timers, Multiple Folders,... Read more
Adobe After Effects 17.1.4 - Create prof...
After Effects is available as part of Adobe Creative Cloud for $52.99/month (or $20.99/month for a single app license). The new, more connected After Effects can make the impossible possible. Get... Read more

Latest Forum Discussions

See All

Infinity Mechs is an upcoming idle game...
Indie developer SkullStar studio has announced an upcoming idle mech game called Infinity Mechs. It draws inspiration from the mobile game Iron Saga and has been officially licensed by Game Duchy. It's set to launch for both iOS and Android on... | Read more »
PUBG Mobile Lite's latest update se...
PUBG Mobile Lite, the streamlined version of the popular battle royale that's designed to work on less powerful devices, sees the return of a popular game variant today, Survive Till Dawn mode. It arrives as part of the 0.19.0 content update. [... | Read more »
Matchy Catch, Jyamma Games’ new hyper-ca...
Matchy Catch is a new hyper-casual puzzler from Jyamma Games, the Italian studio behind the Pong-inspired puzzle-adventure Hi-Ball Rush. It’s only the developer’s second game for iOS and Android devices, but it promises to be every bit as fun and... | Read more »
Among Us! Imposter Guide - How to be a s...
Among Us! continues to be getting a lot of play in these parts, and since our first guide we've learned a thing or two about the game. This is especially true regarding the imposter role, as its a relatively rare opportunity that we've now put... | Read more »
Paladin's Story is an upcoming fant...
Paladin's Story is an upcoming fantasy RPG with an off-kilter sense of humour that's heading for iOS and Android. It will officially launch for both on September 16th though the game is already available on Google Play in Early Access. [Read more... | Read more »
Among Us! Guide - Tips for the uninitiat...
| Read more »
A Pretty Odd Bunny is a stealth-platform...
A Pretty Odd Bunny is a stealth-platformer from two-man team AJ Ordaz and René Rivera. It follows the story of a red-eyed rabbit who is allergic to carrots and instead has a penchant for devouring pigs. It's available now for Android devices. [... | Read more »
Apple Arcade: Ranked - Top 25 [Updated 9...
In case you missed it, I am on a quest to rank every Apple Arcade game there is. [Read more] | Read more »
The 5 Best Mobile Games Like Tony Hawk...
Tony Hawk’s Pro Skater 1+2 dropped last week, meaning you can get remastered versions of two of the most iconic “sports” games ever made and experience some of the highest watermarks set in games of generations’ past. [Read more] | Read more »
Bouncing Box is a challenging platformer...
In platformers, we often spend a large amount of time mindless destroying boxes by jumping onto or into them, whatever makes them splinter apart. Bouncing Box from developer The K Brothers aims to give those poor destructible cubes a chance to be... | Read more »

Price Scanner via

Price drop! Get a 44mm Apple Watch Series 5 G...
Amazon has dropped their price on the 44mm Apple Watch Series 5 GPS + Cellular by $100 to $429 shipped. That’s $100 off Apple’s original MSRP for this model. For the latest prices and sales, see our... Read more
Verizon offers $200 discount on new Apple Wat...
Verizon will take up to $200 off the purchase of a new GPS + Cellular Apple Watch Series 6 or Apple Watch SE with select trade-in and the purchase of a new iPhone with service. The fine print: “Get... Read more
Verizon offers $250 discount on new 8th gener...
Verizon will take up to $250 off the price of an 8th generation 2020 Apple Cellular iPad with select trade-ins and a new iPhone purchase. Plus get Apple News+ free for 6 months. The fine print: “Save... Read more
Apple’s Implementation Of COVID-19 Exposure...
NEWS: 09.18.20 – The latest effort by Apple to embed exposure notifications for COVID-19 contact tracing right into its mobile operating system has some iPhone users weary of being exposed to... Read more
Here’s how to get a 16″ MacBook Pro for $300...
B&H Photo has new 16″ MacBook Pros on sale today for $250-$300 off Apple’s MSRP, starting at $2099. Expedited shipping is free to many addresses in the US: – 2019 16″ 2.6GHz 6-Core MacBook Pro... Read more
Apple has Certified Refurbished 16″ MacBook P...
Apple has Certified Refurbished 2019 16″ MacBook Pros available for up to $420 off the cost of new models, starting at $2039. Each model features a new outer case, shipping is free, and an Apple 1-... Read more
Price drops! Apple reseller B&H drops App...
B&H Photo has dropped prices on Apple Watch Series 5 models by $50-$70 off Apple’s original MSRP. Shipping is free. These are the same Apple Watch models sold by Apple in their retail and online... Read more
Apple extends their 2020 Back-to-School promo...
As part of their Back to School promotion for 2020, Apple will include one free pair Apple AirPods (with charging case) with the purchase of a MacBook Air, MacBook Pro, iMac, iMac Pro (Mac Pro and... Read more
Apple 7.9″ iPad minis are on sale today for $...
Amazon has new 7.9″ 64GB WiFi iPad minis on sale today for $50 off Apple’s MSRP, each including free shipping. Prices start at $349. These are the same iPad minis sold by Apple in their retail and... Read more
Lowest price anywhere! New 16″ 6-core MacBook...
Expercom has the Silver 16″ 6-core MacBook Pro back on sale for a limited time for $2079 shipped. Their price is $320 off Apple’s MSRP for this model, and it’s the cheapest price currently available... Read more

Jobs Board

Platform - Workplace Eng - *Apple* Enterpri...
MORE ABOUT THIS JOB We are looking for an Apple Platform Engineer who will bring a unique engineering skill set, support, clarity, organization and above all else, Read more
*Apple* Certified Repair Technician - Utah S...
…selected candidate will work in the USU Campus Store Tech Department as an Apple Certified Repair Technician and floor associate. This position is for both summer Read more
Senior Data Engineer - *Apple* - Theorem, L...
Job Summary Apple is seeking an experienced, detail-minded data engineeringconsultant to join our worldwide business development and strategy team. If you are Read more
Desktop Support Technician - A+, *Apple* -...
Desktop Support Technician - A+, Apple **Ref No.:** 20-01604 **Location:** Miami, Florida **e** at **X** at **cell** at Read more
Tier 2 Technical Support Analyst - ( *Apple*...
…Analystiless than/strong>who will analyze and determine user software needs on all Apple devices (first support contact), Windows devices, and support printers in Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.