TweetFollow Us on Twitter

June 93 - THE VETERAN NEOPHYTE

THE VETERAN NEOPHYTE

TINY FUTURES

DAVE JOHNSON

[IMAGE Johnson.gif]

I recently attended the First General Conference on Nanotechnology. The conference was sponsored primarily by the Foresight Institute, an organization based in Palo Alto, California, whose sole self-stated goal is to disseminate information about nanotechnology, to inform the public about the topic, and to just sort of do whatever seems necessary to get society ready, to prepare the ground, for the advent of this world-transforming future technology. (Apple also helped sponsor the conference, a fact I didn't even know until I arrived.) There had been previous "research" gatherings dealing with nanotechnology, but those were primarily for scientists and other gearhead types (most of whom, it should be noted, showed up for this one, too). This, though, was the first such gathering intended for the general public, and the first intended to foster open discussion on the topic by all kinds of people.

It was absolutely fascinating, on lots of levels, and a total blast! It was intellectually and scientifically stimulating, of course, and that's a lot of fun by itself, in a quiet sort of way. But it was also an unparalleled opportunity towatch some really weird people,and that's fun in a much larger, noisier sort of way. Watching wild ideas being bandied about by wild, zealous people is fine sport, and this was the perfect place for it. The enthusiasm among the participants was sizzling, and the whole thing smelled sort of cultish, almost religious in its zeal and drive. As I said, a blast!

I don't want to imply that it was a circus, that the participants were doddering, babbling boobs or mindless, frenzied fanatics. Nothing could be further from the truth. On the contrary, there wereall kinds of people there -- writers, computer folks, venture capitalists, cryonicists, physicists, doctors, marketers, biologists, businesspeople, you name it -- and the ideas being discussed were often taken very seriously. But therewas a healthy contingent of fringe-dwellers and edge-runners, people whose beliefs often set them slightly apart from your average, ordinary citizen (whatever that is). People who like to peek over the edge -- any edge -- to see what's there. Nanotechnology is a precipitous edge indeed.

Nanotechnology has been getting a lot of press lately, but for those of you who haven't heard or read about it yet, let me run you through the basics. Nanotechnology is the brainchild of one Dr. K. Eric Drexler, MIT graduate and technological visionary extraordinaire. (Some of the ideas and concepts of nanotechnology weren't new, but Drexler brought them together, gave them a name, and carried them much further than anyone else had dared.) Simply put, nanotechnology is the ability to precisely and completely control the structure of matter at the molecular or atomic level, by building the desired substance or structure molecule by molecule or atom by atom, placing each in the precise location we want. This capability has implications and ramifications without end, as we'll soon see. But the central spark of the idea -- placing atoms one by one -- remains simple and elegant, and we should be careful to remember that fact as we wander, often lost in the churning chaos, through the landscapes of possibilities that this oh-so-simple idea can generate. (It's equally important, by the way, to remember that nanotechnology is still a fairy tale, though possibly a prophetic one. All the books, meetings, articles, discussions, and press coverage are about something that can't be done, at least not yet. So although the general buzz around the conference tended to use the present tense -- an indication of the rampant confidence most of these people possess -- it's all still a dream, though as compelling and disturbing a dream as any I've ever known, and one that's being dreamt by some very, very capable minds.)

The termnanotechnologyhas been popularized lately, for better or for worse, and has been applied to a number of very different technologies that are decidedlynotwhat Drexler has in mind. Their only similarity with Drexler's nanotechnology is that they involve very small scales. You've probably all seen those electron microscope pictures of little bitty gears and shafts and motors and flaps that have been carved from silicon. There's a large effort under way to build these micromachines, and it's a fascinating technology, but it's not what we're talking about. Those efforts, like many others that are popularly called nanotechnology, are characterized by starting with some block of material -- a bazillion atoms in a chunk -- and carving out bits or adding bits like a sculptor to get the shape you want. The resulting parts are still made of a bazillion atoms; you're still dealing withclumps of atoms at a time. Drexler calls thisbulk technology. Admittedly, the clumps are getting very, very small these days, but it's really just a refinement of the same manufacturing technology we've had since the stone age: take a hunk of material and shape it.

Drexler's nanotechnology -- he promoted the termmolecular manufacturingat the conference, and it's a more descriptive, if less poetic, name -- comes around from the other side. It starts with individual atoms and molecules and puts them together, essentially one piece at a time, to build up the desired material or structure. This is the key distinction between bulk technology and what we're calling nanotechnology.

Drexler also postulates a nanomachine he calls anassembler. It's a general-purpose atom positioning machine, sort of a nano-scale robot, complete with sensors to detect the atom or molecule, some sort of "gripper" to hold and position it, and a powerful computer to control the thing. This is the little bugger that really cuts nanotechnology loose. If you have assemblers, you have the proverbial general manufacturing machine: you can build anything, including more general manufacturing machines. (Actually, these days people talk more about "mills" than individual robot-like assemblers. Mills are like production lines, with conveyor belts rather than arms, and a continuous flow of material. Although in this column I'll use the wordassembler what I really mean is this: a machine that can arrange atoms and molecules in a general way, and therefore can be used to build anything we can think of.)

OK, so now that we have a handle on what we're talking about, let's play that game we all love so much, Predicting the Future. If wecouldbe atomic bricklayers, if wecouldcommand the structure of matter, just what sorts of strange things would we build? Here's where we can really have some fun. The ramifications of being able to build things atom by atom are of course myriad. Nanotechnology is one of those ideas that, when planted firmly in human minds, seems to serve as a catalyst, breeding innumerable possible future scenarios. It's a technology (a nonexistent one, remember!) that could conceivably touch and transform every important aspect of our lives.

Many scenarios are immediately apparent. For one thing, molecular manufacturing promises materials that are lighter, stronger, cheaper, and just generally better in every way. As any materials scientist will be happy to tell you, materials in the real world are generally riddled with defects. Carving away at them or adding other bulky bits to them as we do today doesn't change that fact, and actually often exacerbates it. But if we could build up our materials atom by atom, each precisely placed, the resultant material would be atomically precise, atomicallyperfect! This would mean that we could build much, much lighter weight structures, using lots less material to do the same job. That in itself has enormous benefits, but it's just the beginning: beyond improving existing materials, we could build anynewmaterial we can think of, as long as it's allowed by the laws of nature.

And the manufacturing processes themselves could be made amazingly efficient, using cheap and plentiful raw materials, producing virtually no waste, and consuming very little energy, if any at all. At the conference there was much talk, only partly tongue in cheek, of a tabletop nanofabricator,about the size of a microwave oven, with four rubber feet and a fan in the back, plugged into the wall. According to Drexler's calculations we could feed this thing 1.6 kilograms per hour of feed stock solution (acetone, I think he said: a cheap and plentiful source of carbon and hydrogen) and 0.8 kg/hr of atmospheric oxygen, and out the other end would come 1.0 kg/hr of diamond (or whatever carbon material you have in mind), 1.5 kg/hr of chemically pure water, 1.1 kW of waste heat, and, as a by- product of the process, 3.6 kW of surplus electricity. (Why plug it in? So that you can deliver the electricity to the power grid.)

With manufacturing processes like that, economics is suddenly turned on its ear. Some say there would be no more poverty, that since with assemblers we'd be able to make nearly anything for nearly nothing, precious materials would no longer be precious; we could make treasure from garbage! Some say we could make food, or better yet, create new materials and technologies that let us make full use of the food we already produce, bringing an end to world hunger.

Going even further out on an already shaky limb, let's examine some medical implementations. If we could build assemblers, we could build other nano-scale robots to do our bidding. Tiny observation machines could be injected into our bloodstream to seek out and report any damage, effectively giving doctors eyes into your body at the cellular level. How about nanogoop that you pour on a wound that disinfects it, seals it, and accelerates the regeneration of lost tissue? The cryonicists -- people who have themselves frozen for some hopeful future awakening -- have pinned most of their hopes for resuscitation on some sort of cell-repair machines that can go in and repair the tissue damage due to freezing. One speaker at the conference, an MD researching organ cryopreservation, planted his tongue firmly in his cheek and went truly wild with his speculations. Get this: subcutaneous "smart" armor that could see a blow or a bullet coming andreact, bracing itself or maybe even pulling your skin away from the danger! He went on to talk about the "tradeoffs involved in becoming a flying person," a topic "no one has talked about before." (The conclusion was effectively that wings are very inconvenient and would really get in the way when you weren't flying, but they're probably worth the trouble.)

Then there are, of course, the "dark" scenarios. If it's possible to build assemblers, it will probably also be possible to builddisassemblers: imagine scavenger nanostuff whose programming has gone out of control, so that it disassembles anything it comes into contact with and just builds more copies of itself (I can see you artificial life fans pricking up your ears). This is known as the "gray goo" scenario. (Speculations about this sort of out-of-control goo cause equally energetic counter- speculations: encrypting the program so that a one-bit error turns it to hash; anti-goo goo -- so-called "blue goo" -- that recognizes and destroys the gray stuff; using a "broadcast architecture" so that the machines have no autonomy at all, and thus can't get out of control in the first place; and so on.)

Machines building copies of themselves opens up a Pandora's box of implications and problems: if these machines are the least bit autonomous and there's the possibility of mutation -- of nonfatal errors when building new copies -- they'll naturally begin to evolve! Drexler makes the good point that at the atomic level things are either exactly right or exactly wrong, that nanomachines are wrought in a fundamentallydigitalmedium and are therefore brittle, so errors will tend to be catastrophic and bring things to a screeching halt. But it seems to me that the nanomachines we're talking about -- machines that can sense their environment, harvest raw materials, and build copies of themselves, including their own instructions -- are so complex that a digital error, a bit error, maynot bring everything to a halt, and may indeed change the operation of the machine in subtle, mysterious ways. Anyone who has ever programmed a computer can testify to that.

You can also bet that if one group of people has this technology and another doesn't, and those groups don't like each other, the results could be many kinds of ugly. Nanoweaponry could be more insidious and invisible than any biological weapon, more tenacious than radiation, and ultimately more destructive than any bomb.

Good or bad, many of these scenarios seem pretty far out there. Which brings up a very good question: will it really ever happen? Will we ever be able to build a general manufacturing machine? Can we ever gain that degree of control over matter? Naturally, Drexler thinks so, and so do many others. It's instructive to take a look at some of the practicalities involved. First there's the problem of scale. Obviously, there are an awful lot of atoms in a piece of material that's, say, the size of your fist. Won't it take a long, long time to build up something that size atom by atom? Well, we can do the arithmetic to find out: Let's assume that we could put individual atoms together at a rate of 100 atoms per second. And let's say we want to build 12 grams of diamond. (Diamond is a very popular material in these nano-examples, not because of its worth and beauty but because of its amazing hardness and stability and the fact that it's made of carbon, a very common element.) If you've ever taken a chemistry course you know that 12 grams of carbon contains 6.02 x 1023 atoms (Avogadro's number, remember?). A hundred atoms per second is 864,000 per day, assuming no time off for the little buggers. This is about 3.15 x 109 atoms per year. So we could get our 12 grams of carbon in only, let's see, 6.02 x 1023 atoms divided by 3.15 x 109 atoms per year is roughly 2 x 1014 years. That's two hundred million million years! About fifty thousand times the estimated age of the earth! To build less than half an ounce of carbon. Hmm. Clearly we're going to have to do something drastic, numbers-wise, for this to be at all useful. Because of the extreme scales involved, the numbers quickly fly wildly out of control.

Well, the only way I've heard discussed to bring those numbers under our control is to fight back with large numbers of our own, in this case large numbers of nanomachines (or conveyor belts, or whatever) working simultaneously. And the only way to get that many machines is to build nanomachines that can reproduce, that can build copies of themselves. It's like the old story about the blacksmith shoeing a horse, who charged a penny for the first nail, two pennies for the second, four for the third, and so on: he became rich on one horse. Back to our example, we'd need about 1.0 x 1017 machines working simultaneously, each placing 100 atoms a second, to get our 12 grams in under 24 hours. How long will it take to make that many machines? Well, if each machine can build a copy of itself in one hour (a conservative estimate: an average bacterium does it faster), and we start with one machine, I come up with something like 56 hours. Very doable. And, of course, if we let it go for one more hour, we have twice what we need! When you've got geometric progression on your side, you've got afriend!

OK, so maybe we can handle the scale problem, as long as we're willing to let machines self- reproduce. What about the problem of actually reaching in there and grabbing atoms or molecules? Is it really possible to build molecular "hands"? Well, there are several technologies, each making rapid progress, that are converging on this capability. Scanning Probe Microscopyis a technology that shows great promise in positioning individual atoms (by now you've probably all seen that picture of "IBM" spelled out in individual atoms on a plate). Molecular biotechnology is another promising avenue: molecular biologists are gaining an amazing degree of control of the molecules of life, a degree of control that looks as though it will continue to increase quickly. (In a sense, using bacteria to manufacture insulin, as is done today,is molecular manufacturing; it's just that most of the nanomachinery was borrowed from living things, rather than designed from scratch.) The point is that there are many paths that may lead us to atomic control of matter, not just one.

But there are also some compelling arguments against the "full" vision, the future in which everyone has assemblers and we can make anything we want. First off, an assembler is a very, very complex machine, much more complex than anything humans have ever built, and I'm honestly not convinced that human beings are capable ofever deliberately building something like that. (Accidentally, maybe, but that's another story.)You try to design a machine, constructed entirely from sticky marbles, that can build a copy of itself from ambient sticky marbles floating nearby. Oh yeah, and it has to also be fully programmable, so that it can be instructed to build anythingelse (also from ambient sticky marbles). To my knowledge, no human has ever succeeded, atanyscale, in building a purely mechanical machine that can build a copy of itself. But that's exactly what an assembler needs to be.

Even if we can get the mechanics together, there's still The Software Problem; complex software is always buggy, and the more complex it is, the further from "correct" it will be and the more unpredictable will be the results of such errors. Anyone who says otherwise doesn't know what they're talking about. The software to control a machine that can sense its environment, locate the appropriate parts, grab them, turn them the right way, and stick them to other parts is going to be more complex than anyone today knows how to write.

Then there's this sad fact: no technology is ever equally available to all people at its introduction, or for that matter for as long as there's some advantage, economic or otherwise, to maintaining controlover it. And the advantages to maintaining control of this one are obviously huge. What if you're the first one on the block with that tabletop machine (four rubber feet, remember) cranking out intricately structured diamond struts and electricity? Are you going to stop building your struts and start building copies of your machine for everyone else, or would you be tempted to sell those excellent struts (that no one else can make yet) for just a little while first, and build up a nest egg? OK, I'll giveyouthe benefit of the doubt, but what about that snake oil salesman over there? What do you think he would do? How about your government? If they had it first would they give a copy to you? To another country? These are hard questions, very hard indeed.

There is, of course, one piece of irrefutable proof that nanotechnology can ultimately work: life itself. In a very real way, weare nanotechnology. What are we but a mass of autonomously running nanomachines frantically making copies of themselves and each other? What are we but "out of control" nanostuff that has attained a very high level of organization? Some theorists believe that the odds of the emergence of life are better than previously thought, perhaps even that it's inevitable. They believe that matter has an inherent tendency to organize itself, and that we are the result of that tendency. (I get this creepy image of matter sort of turning around to look at itself.) If we gain total control over matter, perhaps we will also, as part of the bargain, gain total control over life. Now that would be something to write home about!

RECOMMENDED READING

  • Engines of Creation by K. Eric Drexler (Doubleday, 1986). The first book detailing Drexler's ideas.
  • Unbounding the Future by K. Eric Drexler and Chris Peterson, with Gayle Pergamit (Morrow, 1991). A popular account of the implications of nanotechnology.
  • Nanosystems by K. Eric Drexler (Wiley Interscience, 1992). A nanoengineering textbook with detailed designs and calculations. The ultimate in theoretical engineering.
  • Blood Music by Greg Bear (Arbor House, 1985).
  • Whole Earth Review No. 67, Summer 1990.
  • Nick and the Glimmung by Philip K. Dick (Piper Books, London, 1988).

DAVE JOHNSON and his brother Doug decided to dig to China one fine morning long ago, but it turned out to be harder than they thought. The digging slowed and finally stopped around lunch time, both of them exhausted and hungry after digging perhaps 14 inches. They decided to finish the next day. That night, falling asleep, Dave decided to dive through head first, so he'd be right side up when he got to the other side. Dave still hasn't been to China. *

Thanks to Jeff Barbose, Michael Greenspon, Bill Guschwan, Bo3b Johnson, Lisa Jongewaard, Ted Kaehler, and Ned van Alstyne (aka Ned Kelly) for reviewing this column. *

Dave welcomes feedback on his musings. He can be reached at JOHNSON.DK on AppleLink, dkj@apple.com on the Internet, or 75300,715 on CompuServe.*

 

Community Search:
MacTech Search:

Software Updates via MacUpdate

Garmin Express 7.0.0.0 - Manage your Gar...
Garmin Express is your essential tool for managing your Garmin devices. Update maps, golf courses and device software. You can even register your device. Update maps Update software Register your... Read more
ClipGrab 3.8.12 - Download videos from Y...
ClipGrab is a free downloader and converter for YouTube, Vimeo, Facebook and many other online video sites. It converts downloaded videos to MPEG4, MP3 or other formats in just one easy step Version... Read more
VMware Fusion 11.5.5 - Run Windows apps...
VMware Fusion and Fusion Pro - virtualization software for running Windows, Linux, and other systems on a Mac without rebooting. The latest version includes full support for Windows 10, macOS Mojave... Read more
Civilization VI 1.3.0 - Next iteration o...
Civilization® VI is the award-winning experience. Expand your empire across the map, advance your culture, and compete against history’s greatest leaders to build a civilization that will stand the... Read more
Corel Painter 20.1.0.285 - Digital art s...
Corel Painter lets you advance your digital art style with painted textures, subtle glazing brushwork, interactive gradients, and realistic Natural-Media. Easily transition from traditional to... Read more
iTubeDownloader 6.5.19 - Easily download...
iTubeDownloader is a powerful-yet-simple YouTube downloader for the masses. Because it contains a proprietary browser, you can browse YouTube like you normally would. When you see something you want... Read more
OmniFocus 3.8 - GTD task manager with iO...
OmniFocus is an organizer app. It uses projects to organize tasks naturally, and then add tags to organize across projects. Easily enter tasks when you’re on the go, and process them when you have... Read more
Hazel 4.4.5 - Create rules for organizin...
Hazel is your personal housekeeper, organizing and cleaning folders based on rules you define. Hazel can also manage your trash and uninstall your applications. Organize your files using a familiar... Read more
Macs Fan Control 1.5.7 - Monitor and con...
Macs Fan Control allows you to monitor and control almost any aspect of your computer's fans, with support for controlling fan speed, temperature sensors pane, menu-bar icon, and autostart with... Read more
Acorn 6.6 - Bitmap image editor.
Acorn is a new image editor built with one goal in mind - simplicity. Fast, easy, and fluid, Acorn provides the options you'll need without any overhead. Acorn feels right, and won't drain your bank... Read more

Latest Forum Discussions

See All

Dungonian is a card-based dungeon crawle...
Dungonian is a card-based dungeon crawler from developer SandFish Games that only recently launched as a free-to-play title. It offers an extensive roster of playable heroes to collect and enemies to take down, and it's available right now for iOS... | Read more »
Steam Link Spotlight - Signs of the Sojo...
Steam Link Spotlight is a feature where we look at PC games that play exceptionally well using the Steam Link app. Our last entry was XCOM: Chimera Squad. Read about how it plays using Steam Link's new mouse and keyboard support over here. | Read more »
Steampunk Tower 2, DreamGate's sequ...
Steampunk Tower 2 is a DreamGate's follow up to their previous tower defence game. It's available now for both iOS and Android as a free-to-play title and will see players defending their lone base by kitting it out with a variety of turrets. [... | Read more »
Clash Royale: The Road to Legendary Aren...
Supercell recently celebrated its 10th anniversary and their best title, Clash Royale, is as good as it's ever been. Even for lapsed players, returning to the game is as easy as can be. If you want to join us in picking the game back up, we've put... | Read more »
Pokemon Go Fest 2020 will be a virtual e...
Niantic has announced that Pokemon Go Fest will still take place this year although understandably it won't be a physical event. Instead, it will become a virtual celebration and is set to be held on 25th and 26th July. [Read more] | Read more »
Marvel Future Fight's major May upd...
Marvel Future Fight's latest update has now landed, and it sounds like a big one. The focus this time around is on Marvel's Guardians of the Galaxy, and it introduces all-new characters, quests, and uniforms for players to collect. [Read more] | Read more »
SINoALICE, Yoko Taro and Pokelabo's...
Yoko Taro and developer Pokelabo's SINoALICE has now opened for pre-registration over on the App Store. It's already amassed 1.5 million Android pre-registrations, and it's currently slated to launch on July 1st. [Read more] | Read more »
Masketeers: Idle Has Fallen's lates...
Masketeers: Idle Has Fallen is the latest endeavour from Appxplore, the folks behind Crab War, Thor: War of Tapnarok and Light A Way. It's an idle RPG that's currently available for Android in Early Access and will head to iOS at a later date. [... | Read more »
Evil Hunter Tycoon celebrates 2 million...
Evil Hunter Tycoon has proved to be quite the hit since launching back in March, with its most recent milestone being 2 million downloads. To celebrate the achievement, developer Super Planet has released a new updated called Darkness' Front Yard... | Read more »
Peak's Edge is an intriguing roguel...
Peak's Edge is an upcoming roguelike puzzle game from developer Kenny Sun that's heading for both iOS and Android on June 4th as a free-to-play title. It will see players rolling a pyramid shape through a variety of different levels. [Read more] | Read more »

Price Scanner via MacPrices.net

Sams Club Sales Event: $100 off every Apple W...
Sams Club is discounting all Apple Watch Series 5 models by $100 off Apple’s MSRP through June 3, 2020. Choose free shipping or free local store pickup (if available). Sale prices for online orders... Read more
New 16″ MacBook Pros now on sale for up to $2...
Apple reseller DataVision is now offering new 16″ Apple MacBook Pros for up to $255 off MSRP, each including free shipping. Prices start at $2194. DataVision charges sales tax for NY, NJ, PA, and CA... Read more
Apple now offering Certified Refurbished iPho...
Apple is now offering Certified Refurbished iPhone Xr models in the refurbished section of their online store starting at $499. Each iPhone comes with Apple’s standard one-year warranty, ships free,... Read more
Sale! Get a 10.2″ 32GB WiFi iPad for only $27...
Walmart has new 10.2″ 32GB WiFi iPads on sale for $50 off Apple’s MSRP, only $279. These are the same iPads sold by Apple in their retail and online stores. Be sure to select Walmart as the seller... Read more
Apple resellers offer new 2020 Mac minis for...
Apple resellers are offering new 2020 Mac minis for up to $50 off Apple’s MSRP with prices available starting at $759. Shipping is free: (1) B&H Photo: – 2020 4-Core Mac mini: $759 $40 off MSRP... Read more
Sprint is offering the Apple iPhone 11 free t...
Did you miss out on Sprint’s recent free iPhone SE promotion? No worries. Sprint has the 64GB iPhone 11 available for $0 per month for new lines when you trade-in a qualifying phone in any condition... Read more
Apple has clearance 2019 13″ 1.4GHz MacBook P...
Apple has Certified Refurbished 2019 13″ 1.4GHz 4-Core Touch Bar MacBook Pros available today starting at $979 and up to $440 off original MSRP. Apple’s one-year warranty is included, shipping is... Read more
Apple restocks 2019 MacBook Airs starting at...
Apple has clearance, Certified Refurbished, 2019 13″ MacBook Airs available again starting at $779. Each MacBook features a new outer case, comes with a standard Apple one-year warranty, and is... Read more
Apple restocks clearance Mac minis for only $...
Apple has restocked Certified Refurbished 2018 4-Core Mac minis for only $599. Each mini comes with a new outer case plus a standard Apple one-year warranty. Shipping is free: – 3.6GHz Quad-Core... Read more
Apple’s new 2020 13″ MacBook Airs on sale for...
B&H Photo has Apple’s new 2020 13″ 4-Core and 6-Core MacBook Airs on sale today for $50-$100 off Apple’s MSRP, starting at $949. Expedited shipping is free to many addresses in the US. The... Read more

Jobs Board

*Apple* Mac Desktop Support - Global Dimensi...
…Operate and support an Active Directory (AD) server-client environment for all Apple devices operating on the BUMED network + Leverage necessary industry enterprise Read more
Surgical Technologist III, *Apple* Hill Sur...
Surgical Technologist III, Apple Hill Surgical Center - Full Time Tracking Code D5.29.2020 Job Description Surgical Technologist III Apple Hill Surgical Center Read more
Security Officer - *Apple* Store - NANA (Un...
**Security Officer \- Apple Store** **Description** About NMS Built on a culture of safety and integrity, NMSdelivers award\-winning, integrated support services to Read more
Transition Into Practice Program (TIP) - Sept...
…Academy-Transition into Practice (TIP) Residency program at St Mary Medical Center in Apple Valley, CA. **We are seekingRegistered Nurses who are:** + New graduate Read more
Essbase Developer - *Apple* - Theorem, LLC...
Job Summary Apple is seeking an experienced, detail-minded Essbase developer to join our worldwide business development and strategy team. If you are someone who Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.