TweetFollow Us on Twitter




[IMAGE Woodcock_final_rev1.GIF]

Programmers first saw the Component Manager as part of the QuickTime 1.0 system extension. Now that the Component Manager is part of System 7.1, components aren't just for QuickTime programmers any more. This article shows you how to take advantage of the power and flexibility of components as a way to give extended functionality to any Macintosh application.

Software developers are continually searching for ways to avoid reinventing the proverbial wheel every time they need new capabilities for their programs. A new approach is available with components. Components are modules of functionality that applications can share at run time. They enable applications to extend the services of the core Macintosh system software with minimal risk of introducing incompatibilities (unlike, for example, trap patching).

As Figure 1 suggests, components also encourage a building-block approach to solving complex problems. Higher-level components can call lower-level components to build sophisticated functionality, while at the same time making the application program interface (API) much simpler. What's more, because components are separate from an application that uses them, you can modify and extend components without affecting the application.

Components are maintained by the Component Manager, which is responsible for keeping track of the components available at any given time and of the particular services they provide. The Component Manager provides a standard interface through which applications establish connections to the components they need.

Almost anything you can dream up can be a component -- video digitizer drivers, dialogs, graphics primitives, statistical functions, and more. QuickTime 1.0 itself contains a number of useful components, including the movie controller, the sequence grabber, and a variety of image compressors and decompressors (codecs ), all of which are available to any client application.

[IMAGE Woodcock_final_rev2.GIF]

Figure 1 Using Components as Software Building Blocks

To demonstrate the all-around usefulness of components, we'll examine the development and implementation of a component that does some rather trivial mathematical calculations. This example will help us focus on concepts rather than getting lost in the details of solving a complex problem. We'll build a fairly generic component template that you can use in your own designs. We'll also discuss some advanced component features, such as extending component functionality, capturing components, and delegating component functions. Finally, we'll show you some techniques and tools for debugging your components. The accompanyingDeveloper CD Series disc contains our example component's source code, a simple application to test our component, and the debugging tools.

Note that this article doesn't spend a great deal of time explaining how applications can find and use components. We assume that you've invested some effort in reading theQuickTime Developer's Guide (part of the QuickTime Developer's Kit). If you haven't, we strongly urge you to do so, since theDeveloper's Guide contains the definitive description of the Component Manager.

OK, components sound interesting, but should you write one? Why write a component when you can just code the functionality you need directly into your application or write a device driver? Here are a few reasons to choose components over the alternatives:

  • Components are easier for applications to use. Client applications don't have to know what they're looking for before opening a service. This is different from device drivers, where open calls must provide either a driver name or a refNum. An application can simply tell the Component Manager, "I'm looking for somebody to do this for me. Is anybody available?" In addition, clients don't need to set up parameter blocks or make control/status calls to use components. Armed with the API of the component type, the caller simply makes normal function calls to the component, and the Component Manager does the work.
  • Components are more flexible. You can modify the behavior of a component by overriding its capabilities without adversely affecting the application. The Component Manager enables the component to communicate its capabilities to clients dynamically.
  • Components allow you to design more flexible applications. They can be used to divide the functional aspects of an application into parts. For example, a word processing application might use a spelling checker component, a thesaurus component, and a grammar checker component. If the thesaurus component is updated, the application code doesn't have to change at all. A user can simply replace the old thesaurus component with the new one.
  • Components are easier to implement than device drivers. There are no declaration structures, driver headers, assembly code glue, installation INITs, or any of the peculiarities that come with device drivers.
  • Components are easier to debug than device drivers. No longer will you be walking the unit table to find your driver so that you can set a breakpoint at your control call dispatcher. You can easily and effectively debug your code using a source-level debugger such as Symantec's THINK C Debugger.

Now that you know the advantages of components, you have to decide whether the functionality you need is a good candidate for a component. To do this, ask yourself the following:

  • Do I anticipate reusing this functionality in other applications? Components are ideal for providing services that many applications can use.
  • Do I anticipate having to modify certain aspects of this functionality in the future? Functionality encapsulated in a component can be extended or modified without disturbing the original interface specification.
  • Is there a benefit to users in establishing a common API for this functionality, so that other developers can use or extend it? You might want to be able to allow third parties to extend your application without having to expose detailed information about your application's internal data structures. For example, many of the "plug-in" modules for today's popular graphics applications could easily be implemented as components.

A "yes" to more than one of these questions means that components are probably a good approach for your next product. But you still have one last question to answer: has someone else already written a component that solves your problem? To find out, you need to contact Apple's Component Registry group (AppleLink REGISTRY) and ask them. These folks maintain a database of all registered component types, subtypes, and manufacturers, as well as the corresponding APIs (if they're publicly available). A check with the Registry is mandatory for anyone who's contemplating writing a component.

If after all this you find that you're still about to embark into uncharted territory, read on, and we'll endeavor to illuminate your passage.


Client applications use the Component Manager to access components. As shown in Figure 2, the Component Manager acts as a mediator between an application's requests for component services and a component's execution of those requests. The Component Manager uses acomponent instance to determine which component is needed to satisfy an application's request for services. An instance can be thought of as an application's connection to a component. We'll have more to say about component instances later on.

[IMAGE Woodcock_final_rev3.GIF]

Figure 2 How Applications Work With Components

Conceptually, components consist of two parts: a collection of functions as defined in the component's API, and a dispatcher that takes care of routing application requests to the proper function. These requests are represented by request codes that the Component Manager maps to the component functions. Let's take a look at both the component functions and the component dispatcher in detail.

There are two groups of functions that are implemented in a component. One group does the custom work that's unique to the component. The nature of these functions depends on the capabilities that the component is intended to provide to clients. For example, the movie controller component, which plays QuickTime movies, has a number of functions in this category that control the position, playback rate, size, and other movie characteristics. Each function defined in your component API must have a corresponding request code, and you must assign these request codes positive values (0 or greater).

The second group of functions comprises the standard calls defined by the Component Manager for use by a component. Currently, four of these standard callsmust  be implemented by every component: open, close, can do, and version. Two more request codes, register and target, are defined, but supporting these is optional. The standard calls are represented by negative request codes and are definedonly by Apple.

Here's a quick look at each of the six standard calls.

The open function. The open function gives a component the opportunity to initialize itself before handling client requests, and in particular to allocate any private storage it may need. Private storage is useful if your component has hardware-dependent settings, local environment settings, cached data structures, IDs of component instances that may provide services to your component, or anything else you might want to keep around.

The close function. The close function provides for an orderly shutdown of a component. For simple components, closing mainly involves disposing of the private storage created in the open function. For more complex components, it may be necessary to close supporting components and to reset hardware.

The can do function. The can do function tells an application which functions in the component's API are supported. Clients that need to query a component about its capabilities can use the ComponentFunctionImplemented routine to send the component a can do request.

The version function. The version function provides two important pieces of information: the component specification level and the implementation level. A change in the specification levelnormally indicates a change in the basic API for a particular component class, while implementation- level changes indicate, for example, a bug fix or the use of a new algorithm.

The register function. The register function allows a component to determine whether it can function properly with the current system configuration. Video digitizer components, for example, typically use register requests to check for the presence of their corresponding digitizing hardware before accepting registration with the Component Manager. A component receives a register request code only if it explicitly asks for it. We'll see how this is done when we walk through our sample component.

The target function. The target function informs your component it has beencaptured by another component. Capturing a component is similar to subclassing an object, in that the captured component is superseded by the capturing component. The captured component is replaced by the capturing component in the component registration list and is no longer available to clients. We'll discuss the notion of capturing components in more detail later.

All components must have a main entry point consisting of a dispatcher that routes the requests the client application sends via the Component Manager. When an application calls a component function, the Component Manager passes two parameters to the component dispatcher -- a ComponentParameters structure and a handle to any private storage that was set up in the component's open function. The ComponentParameters structure looks like this:

typedef struct {
    unsigned char   flags;
    unsigned char   paramSize;
    short           what;
    long            params[kSmallestArray];
} ComponentParameters;

The first two fields are used internally by the Component Manager and aren't of much interest here. The what field contains the request code corresponding to the component function call made by the application. The params field contains the parameters that accompany the call.

Figure 3 shows a detailed view of how a component function call from an application is processed. The component dispatcher examines the what field of the ComponentParameters record to determine the request code, and then transfers control to the appropriate component function.

Before a component can be used by an application, it must be registered with the Component Manager. This way the Component Manager knows which components are available when it's asked to open a particular type of component.

[IMAGE Woodcock_final_rev4.GIF]

Figure 3Processing an Application's Request for Component Services

Autoregistration versus application registration. There are two ways that you can register a component. By far the easiest way is to build a standalone component file of type 'thng'. At system startup, the Component Manager will automatically register any component that it finds in files of type 'thng' in the System Folder and in the Extensions folder (in System 7) and its subfolders. The 'thng' component file must contain both your component and the corresponding component ('thng') resource. The definition of this resource can be found in the Components.h header file and is shown below.

typedef struct {
    unsigned long  type;    /* 4-byte code */
    short  id;
} ResourceSpec;

typedef struct {
    ComponentDescription td;            /* Registration parameters */
    ResourceSpec         component;     
                                   /* Resource where code is found */
    ResourceSpec         componentName; /* Name string resource */
    ResourceSpec         componentInfo; /* Info string resource */
    ResourceSpec         componentIcon; /* Icon resource */
} ComponentResource;

Figure 4 shows the contents of the component resource that we'll use for the example component.

[IMAGE Woodcock_final_rev5.GIF]

Figure 4 Math Component Resource

An application can also register a component itself using the Component Manager call RegisterComponent or RegisterComponentResource. As we'll see, this registration method facilitates symbolic debugging of components.

Global versus local registration. Components can be registered locally or globally. A component that's registered locally is visible only within the A5 world in which it's registered, whereas a globally registered component is available to all potential client applications. Typically, you register a component locally only if you want to restrict its use to a particular application.


To help you understand how to write a component, we're going to go through the whole process with an example -- in this case, a simple math component. We start by contacting the Apple Component Registry group, and to our astonishment (and their bemusement), we find that there are no registered components that do simple math! We assume for the moment that the arithmetic operators in our high-level programming language are unavailable and that our application is in desperate need of integer division and multiplication support.

We create a component called Math that performs integer division and multiplication.

We need to define function prototypes for each of the calls in our component API -- namely, DoDivide and DoMultiply. The function prototype for the DoDivide component call can be found in MathComponent.h and is shown below. The declaration for the DoMultiply function is similar.

pascal ComponentResult DoDivide (MathComponent mathInstance,
        short numerator, short denominator, short *result) = 
        ComponentCallNow (kDoDivideSelect, 0x08);

This resembles a normal C language function prototype with a relatively straightforward parameter list. The mathInstance parameter is the component instance through which the application accesses the component; we'll see how an application gets one of these instances in a moment. The numerator and denominator parameters are self-explanatory and are passed in by the calling application as well. The contents of the last parameter, result, are filled in by the DoDivide function upon completion.

Those of you who have a passing familiarity with C are probably more than a little curious about the last portion of the declaration. ComponentCallNow is a macro defined by the Component Manager (see "Inside the ComponentCallNow Macro" for the nuts and bolts of how the macro works). Its main purpose is to identify a routine as a component function, as opposed to a normal C function. When an application calls the DoDivide function, the macro is executed. This causes a trap to the Component Manager to be executed, allowing the Component Manager to send a message to the component responsible for handling the function.

The first parameter to the ComponentCallNow macro is an integer value representing the request code for the integer division function. As noted earlier, your component's dispatcher uses this request code to determine what function has been requested. Recall that you may only define request codes that are positive.

The second parameter is an integer value that indicates the amount of stack space (in bytes) that's required by the function for its parameters, not including the component instance parameter. Be careful to note that Boolean and single-byte parameters may need to be passed as 16- bit integer values (see the section "Eleven Common Mistakes" for details). For the Math component, the space required for the DoDivide function is two 16-bit integers followed by a 32-bit pointer, for a total of eight bytes.

The dispatcher of the Math component is shown in its entirety below. Notice that the dispatcher executes its component functions indirectly by calling one of two Component Manager utility functions -- CallComponentFunction or CallComponentFunctionWithStorage. You use CallComponentFunction when your component function needs only the fields in the ComponentParameters structure, and CallComponentFunctionWithStorage when it also needs access to the private storage that was allocated in your component's open function.

pascal ComponentResult main (ComponentParameters *params,
     Handle storage)
    // This routine is the main dispatcher for the Math component.
    ComponentResult result = noErr;
    // Did we get a Component Manager request code (< 0)?
    if (params->what < 0) {
        switch (params->what)
            case kComponentOpenSelect:          // Open request
                result = CallComponentFunctionWithStorage
                    (storage, params,
                    (ComponentFunction) _MathOpen);
            case kComponentCloseSelect:     // Close request
                result = CallComponentFunctionWithStorage
                    (storage, params,
                    (ComponentFunction) _MathClose);
            case kComponentCanDoSelect:     // Can do request
                result = CallComponentFunction (params,
                                ComponentFunction) _MathCanDo);
            case kComponentVersionSelect:       // Version request
                result = CallComponentFunction (params,
                                (ComponentFunction) _MathVersion);
            case kComponentTargetSelect:        // Target request
                result = CallComponentFunctionWithStorage
                    (storage, params,
                    (ComponentFunction) _MathTarget);
            case kComponentRegisterSelect:  // Register request not                                                                     // supported
            default:                         // Unknown request
                result = paramErr;
    else {                               // One of our request codes?
        switch (params->what)
            case kDoDivideSelect:               // Divide request
                result = CallComponentFunction (params, 
                                (ComponentFunction) _MathDoDivide);
            case kDoMultiplySelect:             // Multiply request
                result = CallComponentFunction (params,
                                (ComponentFunction) _MathDoMultiply);
            default:                             // Unknown request
                result = paramErr;
    return (result);

A drawback of the dispatcher is the overhead incurred in having the Component Manager functions mediate all your requests. To reduce your calling overhead and thus improve performance, you can use a fast dispatch technique. While this technique is used in most of the QuickTime 1.0 components, this is the first time that it's been publicly described. See "Fast Component Dispatch" for details.

For the Math component, the DoDivide function is declared as follows:

pascal ComponentResult _MathDoDivide (short numerator,
    short denominator, short* quotient)
    ComponentResult result = noErr;
    if (denominator != 0) {
        *quotient = numerator/denominator;
    else {
        *quotient = 0;
        result = -1L;   // Divide by zero not allowed
    return (result);
The key thing to note here is that component functions must always return a result code. The return value is 32 bits and is defined in the API for the component. In our case, a value of 0 (noErr) indicates successful completion of the call and a negative value indicates that an abnormal completion occurred. Note that for some components a negative result code could indicate that the returned parameter values should be interpreted in a particular manner. For example, a video digitizer may return a negative result code of notExactSize from the VDSetDestination call. This doesn't indicate an error. It just means that the requested size wasn't available on the digitizer and that the next closest size was given instead. Also, since this result code is 32 bits, you could actually return pointers or handles as results, rather than error codes.


In this section, we look at how an application uses the Math component. First, the application has to ask the Component Manager to locate the Math component. If the Math component is found, the application can open it and make calls to it.

We tell the Component Manager which component we're looking for by sending it a ComponentDescription record containing the type, subtype, and manufacturer codes for the desired component. We then call the Component Manager routine FindNextComponent to locate a registered component that fits the description. The code fragment below shows how this looks.

ComponentDescription        mathDesc;
Component                   mathComponentID;
// Math component description
mathDesc.componentType = mathComponentType;
mathDesc.componentSubType = 0L;                 // Wild card
mathDesc.componentManufacturer = 'appl';
mathDesc.componentFlags = 0L;                   // Wild card
mathDesc.componentFlagsMask = 0L;               // Wild card

// Find a Math component
mathComponentID = FindNextComponent (nil, &mathDesc);

The zeros in the componentSubType, componentFlags, and componentFlagsMask fields indicate that they function as wild cards. If the Component Manager was unable to locate a component matching the description, it returns zero.

Assuming the Component Manager returned a nonzero component ID, we now open the component using the OpenComponent call, as follows:

mathInstance = OpenComponent (mathComponentID);

OpenComponent returns a unique connection reference -- a component instance -- to the Math component. If the component instance is nonzero, we're ready to use the component. Figure 5 illustrates the process of finding a component.

[IMAGE Woodcock_final_rev6.GIF]

Figure 5How Applications Find Components

The Math component performs only two functions, dividing and multiplying two integers. To ask it to divide two numbers for us, we just call the component function DoDivide with the component instance value we got by opening the Math component.

result = DoDivide (mathInstance, numerator, denominator, &quotient);

When we're done with the component, we close the connection with the CloseComponent call, like this:

result = CloseComponent (mathInstance);

That's all there is to it. You can see that making component function calls is much like making any other kind of call.


After defining the basic functionality for your component, you may find that you want to extend it beyond what you originally specified in your component API. There are three ways to extend the functionality of existing components:
  • Use the subtype and/or manufacturer fields of the component description to indicate to a client application that a specific component implementation provides previously undefined functionality.
  • Revise the component API to add calls that weren't specified in the original interface.
  • Modify the behavior of a particular component implementation by capturing it and overriding a specific function.

The following sections examine these methods in detail.

Let's add some more functionality to the Math component. The MoMath component extends the Math component by adding an addition function. A new function prototype is added for the new function in MoMathComponent.h, along with a new request code, kDoAddSelect.

pascal ComponentResult DoAdd (MathComponent mathInstance,
        short firstNum, short secondNum, short* result) =
    ComponentCallNow (kDoAddSelect, 0x08);

Request codes for implementation-specific functions must have an ID of 256 or greater. This is required to differentiate these functions from those that are generally defined in the API for the component type. Implementation-specific functions usually provide capabilities beyond those specified in the component API, and thus offer developers a way to differentiate their component implementations from those of competing developers. The following code fragment from the MoMath component dispatcher shows support for the DoAdd function:

case kDoAddSelect: // Add function
    result = CallComponentFunction (params, 
            (ComponentFunction) _MoMathDoAdd);

How does the calling application know that a superset of the Math component is around? To start with, the caller needs to know that such a beast even exists. Remember, this is an extension of a component implementation by a particular vendor, not of the component type in general. In this case, the extended component is differentiated from its basic implementation by its manufacturer code. Both Math and MoMath have the same component type ('math'), but their manufacturer codes differ ('appl' for Math and 'gwck' for MoMath). Note that the subtype field can be used in a similar manner, but it's typically used to distinguish algorithmic variations of a general component type. For example, image compressor components ('imco') use the subtype field to differentiate various types of compression algorithms ('rle ' for run length encoding, 'jpeg' for JPEG, and so on). The manufacturer field is used to identify vendor-specific implementations of a particular compression algorithm.

If the application is aware that this extended component exists, it can use the information stored in the component's 'thng' resource to locate and open it. Once the component has been opened, the application calls the extended function just as it would any other component function.

In the preceding example, we used the manufacturer code to hook in new functionality to the Math component; this allowed a specific implementation to extend the interface. In reality, we would be better off extending the component by defining a change to the Math component API, so that all components of this type would have an interface defined for the new addition function. Of course, this is an option only when you're the owner of the component API. Changing component APIs that are owned by others (for instance, by Apple) is a good way to break applications, and no one appreciates that, least of all your users.

If you're going to take this route, be sure that the existing API is left unchanged, so that clients using the old component's API can use your new component without having to be modified. In addition, it's important to update the interface revision level of components that implement the new API, so that clients can determine whether a particular component implementation supports the new API.

Modifying existing functionality is a little more complicated than adding functionality to a component type. In the example component, the DoDivide function divides two 16-bit integers, truncating the result. We would actually get a better answer if the result were rounded to the nearest integer. We don't need to add a new call to do this, since what we really want to do is replace the implementation of the existing call with a more accurate version. On the other hand, the Mathcomponent does an acceptable job of multiplying two integers, so we don't need to override that function. Instead, we'll use the multiply function that's already implemented.

We can do this by writing a component that does the following:

  • captures the original Math component
  • overrides the original DoDivide function with a more accurate division function
  • delegates the DoMultiply function to the original Math component

Let's start by writing a new component -- in the example code, it's called NuMathComponent -- that contains a dispatcher, as well as functions to handle the Component Manager request codes and the new DoDivide routine. We use a register routine to check for the availability of a Math component before we allow the NuMath component to be registered. If no Math component is available, obviously we can't capture it, and we shouldn't register. We also set cmpWantsRegisterMessage (bit 31) in the componentFlags field of the ComponentDescription record in the NuMath component's 'thng' resource to let the Component Manager know that we want a chance to check our environment before we're registered. With this flag set, the sequence of requests that NuMath will get at registration time will be open, register, and close.

The NuMath component register routine is as follows:

pascal ComponentResult _NuMathRegister (void)
   // See if a Math component is registered. If not, don't register
   // this component, since it can't work without the Math component.
   // We return 0 to register, 1 to not register.

    ComponentDescription    mathDesc;
    mathDesc.componentType = mathComponentType;
    mathDesc.componentSubType = 0L;             // Wild card
    mathDesc.componentManufacturer = 'appl';
    mathDesc.componentFlags = 0L;               // Wild card
    mathDesc.componentFlagsMask = 0L;           // Wild card
    return ((FindNextComponent (nil, &mathDesc) != 0L) ? 0L : 1L);

The original Math component ID is now effectively removed from the Component Manager's registration list. This means that the Math component is now hidden from all other clients, except those that already had a connection open to it before it was captured.

We then open an instance of the Math component, and use the ComponentSetTarget utility (defined in MathComponent.h) to inform Math that it's been captured by NuMath.

result = ComponentSetTarget (mathInstance, self);

Why does a component need to know that it's been captured? If a captured component makes use of its own functions, it needs to call through the capturing component instead of through itself, becausethe capturing component may be overriding one of the calls that the captured component is using. A captured component does this by keeping track of the component instance that the ComponentSetTarget call passed to it and by using that instance to make calls to the capturing component.

When the NuMath Comp;onent receives a divide request code, we dispatch to the new DoDivide function, effectively overriding the DoDivide function that was implemented in the Math component. However, when we receive a multiply request code, we delegate this to the captured Math component, since we aren't overriding the multiply function. We do this by simply making a DoMultiply call to the Math component, passing in the parameters that the NuMath component was provided with.

result = DoMultiply (mathInstance, firstNum, secondNum,

In the close routine of the NuMath component, we remember to close the instance of the Math component we were using, and also to uncapture it so that we restore the system to its original state.

result = CloseComponent (mathInstance);
result = UncaptureComponent (mathComponentID);

As you can see, adding new functionality is no big deal. As always, however, you should notify developers who may use your component of any late-breaking interface changes. You want to be sure that everyone's writing code that conforms to your most recent component specification.


You may encounter some pitfalls during the development of your component. Here we discuss 11 common mistakes that we've either made personally or observed other developers make. We hope that you'll learn from our own fumblings and save yourself time and frustration.

Allocating space at registration time. Generally, it's best if your component allocates its storage only when it's about to be asked to do something -- that is, when it has received a kOpenComponentSelect request code. This way, memory isn't tied up unnecessarily. Remember, your component maynever be called during a given session, and if it's not, it shouldn't hang out sucking up memory some other process might be able to use.

Allocating space in the system heap. The system heap shouldn't be your first choice as a place to put your component globals. The system heap is generally reserved for system-wide resources (big surprise), and most components fall into the category of application resources that needn't be resident at all times. Consider carefully whether you need to scarf up system space. In addition, if your component is registered in an application heap, you should never try to allocate space in the system heap. The fact that you're registered in an application heap probably indicates that there isn't any more space in the system heap for you to grab.

Not supporting the kComponentVersionSelect request code. This is a pretty nasty omission for several reasons. First, this is theeasiest request code to implement; it takes only a single line of code! What are you, lazy? (Don't answer that.) Second, clients may use the API version level to keep track of extended functionality -- it may be that version 2 of a component interface contains additional calls over version 1, and a client certainly has reason to want to know that. Third, clients may use the component version to determine, for example, whether the component in question contains a recent bug fix.

Incorrectly calculating the parameter size for your component function prototype. If you do this, you'll probably notice it right after calling the offending component function, since your stack will be messed up by however many bytes you failed to calculate correctly. A common instance of this error occurs when calculating the space required by a function call that has char or Boolean parameters. Under certain circumstances, Boolean and char types are padded to two bytes when passed as function parameters.

To illustrate, we'll look at two example declarations. How many bytes of stack space need to be reserved for the parameters of the following function?

pascal ComponentResult I2CSendMessage (ComponentInstance ti,
    unsigned char slaveAddr, unsigned char *dataBuf, short byteCount)

The correct answer is eight bytes. The slaveAddr parameter is promoted to two bytes, the dataBuf pointer takes four bytes, and the byteCount takes two bytes. The rest of the declaration then takes the following form:

 = ComponentCallNow (kI2CSendMessageSelect, 0x08);

Let's look at the next example. How many bytes of stack space does this function require?

pascal ComponentResult MyFunction (ComponentInstance ti,
    Boolean aBoolean, char aChar, short *aPointer)

The correct answer is six bytes. The aBoolean parameter takes one byte, the aChar parameter takes one byte, and the aPointer parameter takes four bytes. What's that? Didn't we just say that Boolean and char parameters got padded to two bytes? We certainly did, but these types get padded only when an odd number of char or Boolean parameters occurs consecutively in the declaration. Because we could add one byte for the Boolean to the one byte for the char following it, we didn't need to do any padding -- the total number of bytes was even (two bytes), and that's what's important. In the first example, this didn't work. We added one byte for the char to the four bytes for the pointer following it, and got five bytes, and so we needed to pad the char parameter by one byte. The rest of the declaration for the second example is

 = ComponentCallNow (kMyFunctionSelect, 0x06);

Registering your component when its required hardware isn't available. If your component doesn't depend on specific hardware functionality, don't worry about this. If it does (as, for example, video digitizers do), make sure you check for your hardware before you register your component. The Component Manager provides a flag, cmpWantsRegisterMessage, that you can set in the componentFlags field of your component description record to inform the Component Manager that your component wants to be called before it's registered. This gives your component an opportunity to check for its associated hardware, and to decline registration if the hardware isn't available.

Creating multiple instances in response to OpenComponent calls when your component doesn't support multiple instances. Only you can know whether your component can be opened multiple times. For instance, the Math component is capable of being opened as many times as memory allows (although our sample code restricts the number of open instances to three for the sake of illustration). Normally, a component that controls a single hardware resource should be opened only once and should fail on subsequent open requests. This will prevent clients from oversubscribing your component.

Not performing requisite housekeeping in response to a CloseComponent call. Bad things will happen, especially if you have hierarchies of components! As part of your close routine, remember to dispose of your private global storage and to close any drivers, components, files, and so on that you no longer need.

Allowing multiple instances from a single registration of a hardware component instead of allowing a single instance from each of multiple registrations. While this isn't really a common mistake today, we want to emphasize that there's a big difference between designing your component to allow multiple instances versus registering the component multiple times and allowing each registered component to open only once. In the case of a generic software library element (like Math), there's no problem with multiple instances being opened. In the case of a hardware resource that's being controlled with acomponent, it's almost always preferable to register the component once for every resource that's available (four widget cards would result in four different registrations rather than one registration that can be opened four times).

Why does it matter? Consider an application whose sole purpose in life is to manage components that control hardware resources. It may be selecting which resource to use, which one to configure, or which one to pipe into another. It's much more natural to ask the Component Manager to provide a list of all components of a certain type than it is to open each component that fits the criterian times (until it returns an open error) in order to determine how many are available.

To kill a dead horse, suppose we have three identical video digitizers, and we want to convey that information to the user via a menu list. If all are registered separately, we can easily determine how many video digitizers are available (without even opening them) by using the FindNextComponent call. If only one were registered, the list presented to the user would only be a partial list. Take the blind leap of faith: register duplicate hardware resources!

As a final note, if you're registering a single component multiple times, be sure that the component name is unique for each registration. This allows users to distinguish between available components (as in the menu example in the previous paragraph), and it also helps you avoid the next gotcha.

Always counting on your component refCon being preserved. We know this may be upsetting to many of you, but there exists a situation in which your component refCon may not be valid. A component refCon (similar to a dialog, window, or control refCon) is a 4-byte value that a component or client can use for any purpose. It's accessed through a pair of Component Manager calls, GetComponentRefcon and SetComponentRefcon. Component refCons are frequently used to hold useful information such as device IDs or other shared global data, and so can be quite critical to a component. We can hear you now . . . "What ? You're going to nuke myglobal data reference?!" Well, not exactly -- it's just not as immediately accessible as you would like it to be. Don't worry, it's possible to detect when your component is in this situation and retrieve the refCon from it, as long as you follow a few simple steps.

The situation in question arises when there's not enough room in the system heap to open a registered component. This happens when you run an application (that uses your component) in a partition space so large that all free memory is reserved by the application. This will prevent the system heap from being able to grow. When the application calls OpenComponent, the component may be unable to open in the system heap because there's no available space. In this case, the Component Manager willclone the component. When a component is cloned, a new registration of the component is created in the caller's heap, and the component ID of the cloned component is returned to the caller,not  the component ID of the original registration. The clone is very nearly a perfect copy, but like the Dopplegänger Captain Kirk in theStar Trek episode "What Are Little Girls Made Of?" it's missing something crucial.

That something is the component refCon. The refCon isn't preserved in the clone, so if your component needs the refCon to perform properly, it must be recovered from the original component. How you go about doing this is a bit tricky. We assume that you followed our advice and made sure that your component registered itself with a unique name. (This technique isnot guaranteed to work properly unless this constraint is satisfied -- you'll see why shortly.)

The first problem is detecting whether your component has been cloned at open time. You can determine this by examining your component's A5 world using the GetComponentInstanceA5 routine. If the A5 world is nonzero, you've been cloned. But wait, you say, what if I registered my component locally? Won't it have a valid A5 value? Yep, it sure will, but if it was registered locally, we won't have this nasty situation to begin with, since the component won't be in the system heap anyway.

Now you know that you've been cloned, and that you can't depend on your refCon. How do you retrieve it? Well, we know that there are two registrations of the same component in the Component Manager registration list (the original and the clone). So all we have to do is to set up a componentdescription for our component, and then use FindNextComponent to iterate through all registrations of it. We know what our current component description and ID are, so we can just examine the component description and ID for each component returned. Once we find a component whose ID is different from ours but whose description is identical, we've found the original component registration. We can then make a call to GetComponentRefcon to obtain the original refCon value, and then set the clone's refCon appropriately. Whew!

This technique won't work with a component that registers multiple times and doesn't register each time with a unique name. If component X, capable of multiple registrations, always registers with the name "X," then when we try to find the original component from the clone, there will be multiple components named "X" in the registration list, and we'll be unable to determine which component is the one we were cloned from.

Omitting the "pascal" keyword from declarations for your component dispatcher or for any functions that are called by CallComponentFunction or CallComponentFunctionWithStorage. This bug will only antagonize those developers who are working in C. As many of you know, the Macintosh system software was originally written in Pascal, and functions that are called by Toolbox routines (in this case, by the Component Manager) must conform to Pascal calling conventions. If you fail to include this keyword where necessary, the parameters for your function will be interpreted in the reverse order from what you intended, and your component may enter the Twilight Zone, perhaps never to return.

Trying to read resources from your component file when its resource fork isn't open. When one of your component functions is called, the current resource file (as obtained from CurResFile) isnot  the component's resource file unless you explicitly make it so. If you need to access resources that are stored in your component file, you must first call OpenComponentResFile to get an access path, and then call UseResFile with that path. When you're done with the file, restore the current resource file and call CloseComponentResFile to close your component file.


Debugging components can be frustrating if all you have to work with is MacsBug. Fortunately, there are a few tricks and tools that give you a little more power to terminate those pesky bugs. In this section, we'll show you how to debug your component code with a symbolic debugger, and then we'll examine three utilities that will help you test your component.

Let's suppose that we've got the Math component up and running, but something funny is happening in our DoDivide routine. It would be nice to be able to step through the component code symbolically and see what's happening. Fortunately, there's a simple trick that involves registering our component in such a way that it can be symbolically debugged.

For the purposes of the example, we'll discuss how to do this with Symantec's THINK C development system. The first step is to add the component source code to the application source code project. Then we modify the application code so that instead of using the FindNextComponent call to locate the Math component, we register it ourselves using the RegisterComponent call.

#define kRegisterLocally 0 
mathComponentID = RegisterComponent (&mathDesc,
        (ComponentRoutine) MathDispatcher, kRegisterLocally,
        nil, nil, nil);

Note that when you register a component in an application heap as we're doing, you must register it locally, or your system may die a horrible death after your application quits and its application heap goes away.

The component description, mathDesc, is set up just as before. The second parameter is the main entry point (the dispatcher) to the Math component. The Component Manager will call this routine every time it receives a request code for an instance of the Math component. In the Math component code, we set up a debug compiler flag (DEBUG_IT, found in DebugFlags.h) which, if defined, indicates whether we want to declare our component dispatcher as a main entry point for a standalone code resource or as just another routine linked into our application program.

#ifdef DEBUG_IT
    // Use this declaration when we're running linked.
    pascal ComponentResult MathDispatcher
        (ComponentParameters *params, Handle storage)
    // Use this declaration when we're building a standalone
    // component.
    pascal ComponentResult main
        (ComponentParameters *params, Handle storage)
#endif DEBUG_IT

The two declarations differ only in that one is declared as a main and one isn't. (Remember, with both the source for the component and the application in the same project, we can't have two mains.) Now, each time the Component Manager sends a request code to the Math component, it's calling a component routine linked into the application (MathDispatcher) that we can trace with the debugger. When we've finished debugging the component, we can undefine the debug flag and rebuild the component as a standalone code resource. The test application will now use FindNextComponent to access the standalone component.

THE THING MACSBUG DCMDThe thingdcmd is included on the QuickTime 1.0 Developer's CD. To use this dcmd, simply use ResEdit to copy the 'thng' dcmd resource into a file named Debugger Prefs, and put this file into your System Folder. Once in MacsBug, the dcmd is invoked by entering "thing". A samplethingdisplay is shown in Figure 6.

Displaying Registered Components
Cnt tRef# ThingName Type SubT Manu Flags EntryPnt FileName Prnt LocalA5 RefCon
#0 010005 Movie Grabber barg **** appl 40000000 00000000 QuickTi... 00000000 00000000
#0 010007 Preview Loader blob **** appl 00000000 00000000 QuickTi... 00000000 00000000
#0 01000c Apple Microse... clok micr appl 40000003 00000000 QuickTi... 00000000 00000000
#0 01000d Apple Tick Cl... clok tick appl 40000001 00000000 QuickTi... 00000000 00000000
#0 01000e Apple Alias D... dhlr alis appl 40000000 00000000 QuickTi... 00000000 00000000
#0 010018 Apple Photo -... imco jpeg appl 40600028 00000000 QuickTi... 00000000 00000000
#0 010014 Apple None imco raw appl 4060003f 00000000 QuickTi... 00000000 00000000
#0 01001c Apple Animati... imco rle appl 4060043f 00000000 QuickTi... 00000000 00000000
#0 010016 Apple Video imco rpza appl 40200438 00000000 QuickTi... 00000000 00000000
#0 01001a Apple Graphics imco smc appl 40600408 00000000 QuickTi... 00000000 00000000
#0 010012 imdc SIVQ appl 00000030 00000000 QuickTi... 00000000 00000000
#0 010017 Apple Photo -... imdc jpeg appl 40400028 00000000 QuickTi... 00000000 00000000
#0 010013 Apple None imdc raw appl 40400bff 00000000 QuickTi... 00000000 00000000
#0 01001b Apple Animati... imdc rle appl 40400c7f 00000000 QuickTi... 00000000 00000000
#0 010015 Apple Video imdc rpza appl 40000878 00000000 QuickTi... 00000000 00000000
#0 010019 Apple Graphics imdc smc appl 40400438 00000000 QuickTi... 00000000 00000000
#0 ..000b jimB jph leak 00000000 00000000 QuickTi... 00000000 00000000
#1 010002 NuMath Compon... math appl 80000000 001a9b80 NuMath ... 00000000 00000000
820000 0000 00000000 01263af8
#1 ..0000 Math Component math appl 00000000 001a9f80 Math Co... 00000000 00000000
840001 0000 00000000 01263b08
#0 010001 MoMath Compon... math gwck 00000000 00000000 MoMath ... 00000000 00000000
#0 010011 Apple Standar... mhlr mhlr appl 40000000 00000000 QuickTi... 00000000 00000000
#0 01000f Apple Sound M... mhlr soun appl 40000000 00000000 QuickTi... 00000000 00000000
#0 010010 Apple Video M... mhlr vide appl 40000000 00000000 QuickTi... 00000000 00000000
#0 010006 Movie Control... play **** appl 40000000 00000000 QuickTi... 00000000 00000000
#0 010009 Movie Preview... pmak MooV appl 00000000 00000000 QuickTi... 00000000 00000000
#0 010008 Pict Preview ... pmak PICT appl 00000000 00000000 QuickTi... 00000000 00000000
#0 01000a Picture Previ... pnot PICT appl 00000000 00000000 QuickTi... 00000000 00000000
#0 010003 Movie Grabber... sgch soun appl 40000000 00000000 QuickTi... 00000000 00000000
#0 010004 Movie Grabber... sgch vide appl 40000000 00000000 QuickTi... 00000000 00000000
#32 Thing Table entries, #29 in use.  #32 Instance Table entries, #2 in use.
#5 File Table entries, #4 in use. Thing Modification Seed #33.  Codec Manager 000dad3c

Figure 6Sample thing MacsBug Display

The Cnt field indicates the number of instances of a particular component.

The tRef# field shows the component ID that the Component Manager has assigned to a particular component; this is the value that's returned to your application by the FindNextComponent call. If there are instances of a component open, the component instances are listed below the component ID in the tRef# field. Note that the tRef# for the Math component is ..0000. The two dots at the beginning indicate that this component has been captured. (We know from the earlier discussion of the NuMath component that it has captured the Math component.)

The ThingName field displays the name of a particular component. This is either the string that's pointed to by the component's 'thng' resource or the name that it was registered with by a call to RegisterComponent.

The Type, SubT, Manu, and Flags fields likewise correspond either to the information that's stored in the component's 'thng' resource or to the codes and flags that were supplied to a call to RegisterComponent.

The EntryPnt field is the main entry point of the component code.

The FileName field indicates what file the component's 'thng' resource resides in. This field is empty for components registered without a component resource.

The Prnt field displays the parent of a cloned component. This information isn't available through the Component Manager API.

The LocalA5 field shows the A5 world that the component is associated with; unless the component is cloned or registered locally, this value is 0.

The RefCon field is the value of the component's refCon.

At the bottom of the display there's a decimal number indicating the number of component (thing) entries allocated in the Component Manager registration list, along with the number of entries actually in use. Similar information is given for the number of file table entries. Finally, the Component Manager modification seed is listed.

The Things! control panel, included on the QuickTime 1.0 Developer's CD, is similar to thethingdcmd but provides several additional capabilities. These include displays of version levels, info and name strings, and resource information, as well as controls to reorder the component search chain and to unregister components.

[IMAGE Woodcock_final_rev7.GIF]

Figure 7 Things! Control Panel Main Display

Figure 7 shows a sample display of the Things! control panel.

The list on the left in the top panel shows the types of components currently registered with the Component Manager; the list on the right shows the components of the selected type that are currently registered. The latest version of Things! doesn't display components that aren't registered globally or that aren't registered in the same application heap as the control panel is operating in. Things! also doesn't show components that aren't resource-based.

The middle panel shows the name of the currently selected component and a description of its type, subtype, and manufacturer fields. The number of instances of the type of component selected (in the example, the 'imco', or image compressor, component type) is displayed at the bottom of this panel. Clicking this field will toggle it to display the number of instances of the selected component (in this case, the Apple Video image compressor component).

The bottom panel shows an information string that usually describes what the component does. At the upper left in this panel are two arrow buttons that can be used for paging the bottom panel (the top and middle panels don't change).

Figure 8 shows a variation of the bottom panel's second page. The component version information is displayed at the top. The "Set default" button allows you to assign a particular component as the first component in the Component Manager's search chain for that component type.

[IMAGE Woodcock_final_rev8.GIF]

Figure 8 Things! Page 2 Display

If the Option key is held down while paging to the second page, a Destroy button is displayed (as shown in Figure 9). Clicking this button will unconditionally unregister the currently selected component.

[IMAGE Woodcock_final_rev9.GIF]

Figure 9 Things! Extended Page 2 Display

The third page shows the flags and mask fields of the component.

The fourth page displays a variety of information about the 'thng' resource associated with a particular component, including the resource name and ID as well as its attributes.

Page 5 presents a summary of the system software configuration.

Reinstaller is a utility that lets you install resource-based components without restarting your Macintosh. Launching the application presents a Standard File dialog asking you to choose the file containing the component you want to register. Clicking the Open button will dismiss the dialog and register the selected component with the Component Manager.

The same component file can be installed multiple times. Duplicate components aren't removed; the most recently installed version of a component becomes the default component for that type. Note that any components installed with Reinstaller are installed only until shutdown or reboot.

This utility is quite handy in conjunction with the Things! control panel's Destroy button. Between the two of them, you can easily register and unregister your components without having to restart your Macintosh.


Now you know how easy it is to write your own components. You've learned how to declare your own component API and how to implement a component dispatcher for it. You've seen what common pitfalls to avoid and how to symbolically debug your component to help you get around new pitfalls we haven't thought of.

We're confident that once you start programming components, you'll become addicted! So what are you hanging around here for? Get busy writing, and start amazing your users (and us, too) with some way cool components. We're waiting . . .

The original name for the Component Manager (as conceived of by Bruce "Of course the feature set is frozen!" Leak) was the Thing Manager. Components were referred to as "things" (as were the QuickTime project schedules, the significance of which engineers couldn't easily grasp). The use of this terminology led to one of two conditions in most QuickTime engineers: in some, an irrepressible compulsion to make "thing" puns, and in others, perhaps as a backlash against the former, an almost pathological aversion to the use of the word "thing" in normal conversation.

The original component type for the sequence grabber component was, logically enough, 'grab'. The engineer primarily responsible for the sequence grabber, Peter Hoddie, requires massive infusions of Diet Coke to function properly. During a particularly intense bout of engineering mania, the Diet Coke supply was exhausted; unbeknownst to anyone, Peter became temporarily dyslexic and changed the sequence grabber component type to 'barg'. The change was never noticed, and it caused no real harm, other than the wasted time developers spent trying to figure out what 'barg' might be an acronym for (Boffo AudioReverb Gadget? Bodacious Analog Reference Gizmo?). Peter's brain has since returned to its (relatively) normal state.

Some of you may be wondering exactly what the ComponentCallNow macro does. Let's expand this macro for our DoDivide component call and examine it in detail.

= {0x2F3C, 0x08, kDoDivideSelect, 0x7000, 0xA82A};

The first element, 0x2F3C, is the Motorola 68000 opcode for a move instruction. Execution of this instruction loads the contents of the next two elements onto the stack. The next element, 0x08, is the amount of stack space that we calculated for the function parameters of the DoDivide call. The third element, kDoDivideSelect, is the request code corresponding to the DoDivide call. The fourth element, 0x7000, is the Motorola 68000 opcode for an instruction that sets the contents of register D0 to 0. The Component Manager interprets this condition as a request to call your component rather than handling the request itself. The last element, 0xA82A, is the opcode for an instruction that executes a trap to the Component Manager.

While you can use this inline code in your component function declarations directly, we recommend that you use the ComponentCallNow macro to make your code more portable.


If you're concerned about the time it takes to dispatch calls made to your component, try the fast dispatch method. This method eliminates the need for your component to make the extra call to the Component Manager functions CallComponentFunction and CallComponentFunctionWithStorage, and allows control to pass directly back to the caller. It does this by calling your component entry point with the call's parameters, the instance storage, and the caller's return address already on the stack. It passes the component request code in register D0, and points register A0 at the stack location where the instance storage is kept.

To handle a fast dispatch, you must write your component entry point in assembly language. Use the request code in D0 as an index into a table of function addresses, paying special attention to the negative request codes used for the standard Component Manager calls like OpenComponent and CloseComponent. If the functions are defined correctly, the dispatcher can jump directly to the function address. Note that the function parameter the caller uses to specify the component instance will instead be a handle to your component instance storage. When the function completes, control will return to the calling application.

You need to tell the Component Manager that your component has a fast dispatch handler instead of a normal dispatcher. To do this, set bit 30 ($40000000) of the componentFlags field of your component resource, and the Component Manager will always call your component using the fast dispatch method.


  • QuickTime Developer's Guide  (part of the QuickTime Developer's Kit v. 1.0, ADPA #R0147LL/A). Currently the essential reference for programming with the Component Manager. This documentation will be replaced in the near future by three new Inside Macintosh  volumes: QuickTime, QuickTime Components , and More Macintosh Toolbox.  (The Component Manager will be documented in the latter volume.)
  • "QuickTime 1.0: 'You Oughta Be in Pictures,'" Guillermo A. Ortiz, develop Issue 7. An overview of QuickTime, including the Component Manager.

GARY WOODCOCK AND CASEY KING have a long history of collaboration. They first met at a flight simulation company in the early 80's where they worked together on designing a multimillion-dollar F-16 jet fighter simulator (and you thought Falcon was cool!). They parted ways temporarily, but regrouped at Apple to join forces in what colleague Jim Batson has termed the "QuickTime sleep deprivation experiment." They're both currently working on RISCy products, but from different parts of the country (Gary in Cupertino, and Casey in the new PowerPC mecca of Austin, Texas). With his wife Lonna,Casey is the proud co-owner of his latest obsession -- a year-old baby boy named Brian -- but he still makes time for mountain biking, hiking, and flying. Gary still spends much of his time diligently testing video capture cards for QuickTime compatibility with Movie Recorder (translation: watching Star Trek: The Next Generation  episodes on his Macintosh). Occasionally he ventures out for a bit of mountain biking or flying. This article is their latest joint venture. *

HELPFUL TIP You can obtain the component ID corresponding to a component instance by calling GetComponentInfo with the component instance (you'll need to cast it as a Component). The componentFlagsMask of the returned ComponentDescription record will contain the component ID. *

In our sample code, ComponentSetTarget is defined in MathComponent.h because the QuickTime 1.0 Components.h interface file doesn't declare it. The ComponentSetTarget declaration is included in newer QuickTime interface files, so if you're using them, you should comment it out in MathComponent.h. *

THANKS TO OUR TECHNICAL REVIEWERS Neil Day, Mike Dodd, Mark Krueger, John Wang *


Community Search:
MacTech Search:

Software Updates via MacUpdate

Sibelius 2020.6 - Music notation solutio...
Sibelius is the world's best-selling music notation software for Mac. It is as intuitive to use as a pen, yet so powerful that it does most things in less than the blink of an eye. The demo includes... Read more
Bookends 13.4.2 - Reference management a...
Bookends is a full-featured bibliography/reference and information-management system for students and professionals. Bookends uses the cloud to sync reference libraries on all the Macs you use.... Read more
OmniGraffle Pro 7.16 - Create diagrams,...
OmniGraffle Pro helps you draw beautiful diagrams, family trees, flow charts, org charts, layouts, and (mathematically speaking) any other directed or non-directed graphs. We've had people use... Read more
Drive Genius 6.1.0 - $79.00
Drive Genius features a comprehensive Malware Scan. Automate your malware protection. Protect your investment from any threat. The Malware Scan is part of the automated DrivePulse utility. DrivePulse... Read more
Tor Browser 9.5 - Anonymize Web browsing...
The Tor Browser Bundle is an easy-to-use portable package of Tor, Vidalia, Torbutton, and a Firefox fork preconfigured to work together out of the box. It contains a modified copy of Firefox that... Read more
VueScan 9.7.28 - Scanner software with a...
VueScan is a scanning program that works with most high-quality flatbed and film scanners to produce scans that have excellent color fidelity and color balance. VueScan is easy to use, and has... Read more
OmniGraffle 7.16 - Create diagrams, flow...
OmniGraffle helps you draw beautiful diagrams, family trees, flow charts, org charts, layouts, and (mathematically speaking) any other directed or non-directed graphs. We've had people use Graffle to... Read more
WALTR 2 2.6.26 - $39.95
WALTR 2 helps you wirelessly drag-and-drop any music, ringtones, videos, PDF, and ePub files onto your iPhone, iPad, or iPod without iTunes. It is the second major version of Softorino's critically-... Read more
Airmail 4.1 - Powerful, minimal email cl...
Airmail is an mail client with fast performance and intuitive interaction. Support for iCloud, MS Exchange, Gmail, Google Apps, IMAP, POP3, Yahoo!, AOL,, Airmail was designed... Read more
Iridient Developer 3.3.12 - Powerful ima...
Iridient Developer (was RAW Developer) is a powerful image-conversion application designed specifically for OS X. Iridient Developer gives advanced photographers total control over every aspect of... Read more

Latest Forum Discussions

See All

Willy Jetman: Astromonkey's Revenge...
Barcelona-based developer Last Chicken Games are set to bring their game Willy Jetman: Astromonkey's Revenge to both iOS and Android on 9th July. The Metroidvania is already available on the likes of PS4, Switch and PC but now mobile folk will be... | Read more »
The 5 Best Mobile Real Time Strategy Gam...
Real-time strategy games feel like they’d be a perfect fit for mobile, but they’re trickier to pull off that you might think. The traditional mold of base-building and micro management can work on touch screens, but needs to be carefully honed so... | Read more »
Using your phone in a protest
I can't write about games today. There is a struggle happening in the streets right now and it needs everyone's attention. Here's some good info on how you can use your iOS device safely amidst a protest. | Read more »
Dungonian is a card-based dungeon crawle...
Dungonian is a card-based dungeon crawler from developer SandFish Games that only recently launched as a free-to-play title. It offers an extensive roster of playable heroes to collect and enemies to take down, and it's available right now for iOS... | Read more »
Steam Link Spotlight - Signs of the Sojo...
Steam Link Spotlight is a feature where we look at PC games that play exceptionally well using the Steam Link app. Our last entry was XCOM: Chimera Squad. Read about how it plays using Steam Link's new mouse and keyboard support over here. | Read more »
Steampunk Tower 2, DreamGate's sequ...
Steampunk Tower 2 is a DreamGate's follow up to their previous tower defence game. It's available now for both iOS and Android as a free-to-play title and will see players defending their lone base by kitting it out with a variety of turrets. [... | Read more »
Clash Royale: The Road to Legendary Aren...
Supercell recently celebrated its 10th anniversary and their best title, Clash Royale, is as good as it's ever been. Even for lapsed players, returning to the game is as easy as can be. If you want to join us in picking the game back up, we've put... | Read more »
Pokemon Go Fest 2020 will be a virtual e...
Niantic has announced that Pokemon Go Fest will still take place this year although understandably it won't be a physical event. Instead, it will become a virtual celebration and is set to be held on 25th and 26th July. [Read more] | Read more »
Marvel Future Fight's major May upd...
Marvel Future Fight's latest update has now landed, and it sounds like a big one. The focus this time around is on Marvel's Guardians of the Galaxy, and it introduces all-new characters, quests, and uniforms for players to collect. [Read more] | Read more »
SINoALICE, Yoko Taro and Pokelabo's...
Yoko Taro and developer Pokelabo's SINoALICE has now opened for pre-registration over on the App Store. It's already amassed 1.5 million Android pre-registrations, and it's currently slated to launch on July 1st. [Read more] | Read more »

Price Scanner via

Apple restocks 27″ iMacs, Certified Refurbish...
Apple has restocked Certified Refurbished 2019 27″ iMacs starting at $1529 and up to $350 off the cost of new models. Apple’s one-year warranty is standard, shipping is free, and each iMac features a... Read more
Apple’s new 2020 13″ 4-Core MacBook Airs on s...
B&H Photo has Apple’s new 2020 13″ 4-Core MacBook Airs on sale today for $100 off Apple’s MSRP, only $1199. Expedited shipping is free to many addresses in the US. The MacBook Airs are the same... Read more
New Verizon promo: $150 off any Apple Watch w...
Verizon is offering $150 off any Apple Watch when purchased alongside an iPhone through June 10, 2020. They’re also offering up to $100 on any Apple Watch trade-in. Here are the details: “Get $150... Read more
Last year’s 13″ 2.4GHz MacBook Pros are avail...
Apple has Certified Refurbished 2019 13″ 2.4GHz/256GB 4-Core Touch Bar MacBook Pros available for $1359, $440 off original MSRP. Apple’s one-year warranty is included, shipping is free, and each... Read more
Apple’s new 2020 13″ MacBook Pros on sale for...
Apple reseller Abt Electronics has new 2020 13″ MacBook Pros on sale today for up to $140 off MSRP, starting at $1208. Shipping is free, and most configurations are in stock today. Note that Abt’s... Read more
Apple CEO Reacts To Nationwide Protests Over...
NEWS: 06.03.20 – With the recent death of a black man in the custody of a white police officer igniting outrage among Americans from all walks of life, which resulted in protests and civil unrest... Read more
At up to $420 off MSRP, these Certified Refur...
Apple has Certified Refurbished 2019 16″ MacBook Pros available for up to $420 off the cost of new models, starting at $2039. Each model features a new outer case, shipping is free, and an Apple 1-... Read more
Apple restocks refurbished 3rd generation 12....
Apple restocked select 3rd generation 12.9″ WiFi iPad Pros starting at only $699 and up to $330 off original MSRP. Each iPad comes with a standard Apple one-year warranty, outer cases are new, and... Read more
These wireless carriers are offering Apple’s...
Looking for a deal on Apple’s new iPhone SE? Apple itself offers the unlocked 64GB iPhone SE for $399 or $16.62/month. If you’re willing to try a new carrier, two of Apple’s wireless carriers are... Read more
Save $80 on the 64GB 10.5″ iPad Air with this...
Apple has 10.5″ 64GB WiFi iPad Airs models available for $80 off MSRP, Certified Refurbished. Each iPad comes with Apple’s standard one-year warranty and includes a new outer case. Shipping is free... Read more

Jobs Board

*Apple* Architect - SAIC (United States)
**Description** We are currently seeking a motivated, career and customer oriented Apple Architect to join our team in Washington, DC to begin an exciting and Read more
*Apple* Support Engineer - SAIC (United Stat...
**Description** We are currently seeking a motivated, career and customer oriented Apple Support Engineer to join our team in Washington, DC to begin an exciting and Read more
Perioperative RN - ( *Apple* Hill Surgical C...
Perioperative RN - ( Apple Hill Surgical Center) Tracking Code 60593 Job Description Monday - Friday - Full Time Days Possible Saturdays General Summary: Under the Read more
Senior Practice Manager - *Apple* Hill Eye...
Senior Practice Manager - Apple Hill Eye Center Tracking Code 61713 Job Description Apple Hill Medical Center General Summary: Under general supervision, manages Read more
*Apple* Mac Desktop Support - Global Dimensi...
…Operate and support an Active Directory (AD) server-client environment for all Apple devices operating on the BUMED network + Leverage necessary industry enterprise Read more
All contents are Copyright 1984-2011 by Xplain Corporation. All rights reserved. Theme designed by Icreon.